summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-01-14zynq: mtd: nand: Remove hardcoded base addressesAshok Reddy Soma
Remove hardcoded base addresses of smc controller and nand controller. Get those addresses from dt and replace wherever they are used. Remove smc and nand base address from header file too. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14zynq: mtd: nand: Move zynq nand driver to driver modelAshok Reddy Soma
Move the zynq nand driver to driver model. Select DM_MTD if zynq nand controller (NAND_ZYNQ) is selected. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14spi: Fix manual relocation calling more timesAshok Reddy Soma
When two instances of AXI QSPI with flash are added and tested simultaneously the spi driver operations are relocated twice. As a result code is accessing addresses outside of RAM when relocated second time which is causing a crash. Tested on Microblaze. Similar change was done in past by: commit f238b3f0fbc9 ("watchdog: dm: Support manual relocation for watchdogs") commit 2588f2ddfd60 ("dm: sf: Add support for all targets which requires MANUAL_RELOC") commit 1b4c2aa25bdf ("gpio: dm: Support manual relocation for gpio") Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14mtd: nand: Remove hardcoded base address of nandAshok Reddy Soma
Remove hardcoded base address of nand and replace it with the value taken from device tree. Remove base address from header file too. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14mtd: nand: Move arasan nand driver to driver modelAshok Reddy Soma
Make changes to arasan nand driver to move it to driver model. Select DM_MTD if arasan nand driver is selected. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-10virtio: fix typo devicdHeinrich Schuchardt
%s/devicd/device Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-01-10poweroff: add poweroff for mt6323 pmicFrank Wunderlich
this adds poweroff to bananapi r2 / mt7623 / mt6323 pmic Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2020-01-10rtc: add support for DS3232 deviceHan Nandor
DS3232 is an i2c RTC with 236 bytes of battery-backed SRAM. Add an RTC driver for DS3232 device, which provides time and date support. Also read and write functions are provided, which can be used to access the SRAM memory. Signed-off-by: Nandor Han <nandor.han@vaisala.com>
2020-01-10bootcount: add a DM i2c eeprom backing store for bootcountRobert Beckett
This driver allows the use of i2c eeprom device or partition as backing store for boot counter values with DM enabled. Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-10drivers: mcfmii: add dm supportAngelo Durgehello
Add specific dm code, but maintaining this driver as is, so more in the shape of a mii library. Can be moved to dm in a further step. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-10drivers: fsl_mcdmafec: conversion to dmAngelo Durgehello
Full conversion to dm for all boards, legacy code removed. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-10drivers: mcffec: conversion to dmAngelo Durgehello
Full conversion to dm for all boards, legacy code removed. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-10drivers: net: add mcf fec dm Kconfig supportAngelo Durgehello
Add ColdFire fec to Kconfig. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-09Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-mpc83xxTom Rini
- A small PR with MC8309 fixes from Rasmus.
2020-01-09Merge tag 'dm-pull-8jan20' of git://git.denx.de/u-boot-dmTom Rini
dm: Increased separation of ofdata_to_platdata() and probe methods
2020-01-09Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DFU updates
2020-01-08Merge tag 'efi-2020-04-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc1 This pull request provides: * support for FIT images for UEFI binaries * drivers for hardware random number generators * an implementation of the EFI_RNG_PROTOCOL * a sub-command for efidebug to display configuration tables
2020-01-08Merge tag 'u-boot-imx-20200108' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------------------------------------------- Add i.MX8MP SoC and EVK board Update README for i.MX8MN EVK and fix mmc env Add pca9450 driver -------------------------------------------------------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
2020-01-08Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2020-01-08Merge tag 'u-boot-amlogic-20200108' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - Khadas VIM3L based on Amlogic S905D3 support - Various fixups for amlogic boards - Unnecessary header includes drop into video/meson
2020-01-08ata: fsl_sata: Continue probing other sata port when failed current port.Peng Ma
In the initialization of sata driver, we want to initialize all port probes, Therefore, any detection failure between of them should continue initialization by skipping the current port instead of exit. Signed-off-by: Peng Ma <peng.ma@nxp.com>
2020-01-08ata: sata_sil: Continue probing other sata port when failed current port.Peng Ma
In the initialization of sata driver, we want to initialize all port probes, Therefore, any detection failure between of them should continue initialization by skipping the current port instead of exit. Signed-off-by: Peng Ma <peng.ma@nxp.com>
2020-01-08clk: imx: add i.MX8MP clk driverPeng Fan
Add i.MX8MP clk driver for i.MX8MP CLK driver model usage Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08clk: imx: add imx_clk_mux2_flagsPeng Fan
Add imx_clk_mux2_flags which will be used by i.MX8MP Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08power: Add new PMIC PCA9450 driverYe Li
PCA9450 PMIC series is used to support iMX8MM (PCA9450A) and iMX8MN (PCA9450B). Add the PMIC driver for both PCA9450A and PCA9450B. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08ddr: imx8m: Add DRAM PLL to generate 1000Mhz outputPeng Fan
We will generate DRAM 4000MT/s as default for i.MX8MP. So need DRAM PLL to generate 1000Mhz clock to DDR PHY and controller. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08mxc_ocotp: support i.MX8MPPeng Fan
i.MX8MP use similar ocotp as i.MX8MN, but has changed fuse banks and ctrl register bit definitions, so update to reflect that. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08pinctrl: imx8m: support i.MX8MPPeng Fan
Add i.MX8MP compatible to let the pinctrl driver could support i.MX8MP. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08mpc83xx_clk: always treat MPC83XX_CLK_PCI as invalidRasmus Villemoes
The current mpc83xx_clk driver is broken for any board for which mpc83xx_has_pci() is true, i.e. anything not MPC8308: When is_clk_valid() reports that MPC83XX_CLK_PCI is valid, init_all_clks() proceeds to call init_single_clk(), but that doesn't know about either MPC83XX_CLK_PCI or has any handling of the TYPE_SCCR_ONOFF mode correctly returned by retrieve_mode(). Hence init_single_clk() ends up returning -EINVAL, and the whole board hangs in serial_init(). The quickest fix is to simply pretend that clock is invalid for all, since nobody can have been relying on it. Adding proper support seems to be a bit more involved than just handling TYPE_SCCR_ONOFF: - The power-on-reset value of SCCR[PCICM] is 0, so mpc83xx_clk_enable() would probably need to be tought to enable the clock. - The frequency of PCI_SYNC_OUT is either SYS_CLK_IN or SYS_CLK_IN/2 depending on the CFG_CLKIN_DIV configuration input, but that can't be read from software, so to properly fill out ->speed[MPC83XX_CLK_PCI] I think one would need guidance from Kconfig or dtb. Partially fixes: 07d538d281 clk: Add MPC83xx clock driver Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Mario Six <mario.six@gdsys.cc>
2020-01-07dm: Add a debug message when devices are skipped pre-relocSean Anderson
This adds a message to lists_bind_fdt when it skips initializing a device pre-relocation. I've had a couple errors where a device didn't initialize properly because one of its dependencies was missing. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-01-07dm: devres: Add a new OFDATA phaseSimon Glass
Since the ofdata_to_platdata() method can allocate resources, add it as a new devres phase. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: devres: Use an enum for the allocation phaseSimon Glass
At present we only support two phases where devres can be used: bind and probe. This is handled with a boolean. We want to add a new phase (platdata), so change this to an enum. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: devres: Add testsSimon Glass
The devres functionality has very few users in U-Boot, but it still should have tests. Add a few basic tests of the main functions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: devres: Convert to use loggingSimon Glass
At present when CONFIG_DEBUG_DEVRES is enabled, U-Boot prints log messages to the console with every devres allocation/free event. This causes most tests to fail since the console output is not as expected. In particular this prevents us from adding a device to sandbox which uses devres in its bind method. Move devres over to use U-Boot's logging feature instead, and add a new category for devres. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: core: Add a new flag to track platform dataSimon Glass
We want to avoid allocating platform data twice. This could happen if device_probe() is called after device_ofdata_to_platdata() for the same device. Add a flag to track whether device_ofdata_to_platdata() has been called on a device. Check the flag to make sure it doesn't happen twice, and clear the flag when the data is freed. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: core: Export a new function to read platdataSimon Glass
Add a new internal function, device_ofdata_to_platdata() to handle allocating private space associated with each device and reading the platform data from the device tree. Call this new function from device_probe(). Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: core: Allocate parent data separate from probing parentSimon Glass
At present the parent is probed before the child's ofdata_to_platdata() method is called. Adjust the logic slightly so that probing parents is not done until afterwards. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: core: Move ofdata_to_platdata() call earlierSimon Glass
This method is supposed to extract platform data from the device tree. It should be done before the device itself is probed. Move it earlier in the device_probe() function. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: core: Don't clear active flag twice when probe() failsSimon Glass
Remove this duplicated code, since the 'fail' label does this immediately. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07aspeed: ast2500: Read clock ofdata in the correct methodSimon Glass
At present the clock driver reads its ofdata in the probe() method. This is not correct although it is often harmless. However in this case it causes a problem, something like this: - ast_get_scu() is called (from somewhere) to get the SCI address - this probes the clock - first sets up ofdata (which does nothing at present) - DM marks clock device as active - DM calls pinctrl - pinctrl probes and calls ast_get_scu() in ast2500_pinctrl_probe() - ast_get_scu() probes the clock, but sees it already marked as probed - ast_get_scu() accesses the clock's private data, with scu as NULL - DM calls clock probe function ast2500_clk_probe() which reads scu By putting the read of scu into the correct method, scu is read as part of ofdata setup, and everything is OK. Note: This problem did not matter until now since DM always probed all parents before reading a child's ofdata. The fact that pinctrl is a child of clock seems to trigger this strange bug. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
2020-01-07pci: Print a warning if the bus is accessed before probingSimon Glass
It is not possible to access a device on a PCI bus that has not yet been probed, since the bus number is not known. Add a warning to catch this error. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07usb: Drop use of BUG_ON() and WARN_ON()Simon Glass
These macros use __FILE__ which inserts the full path of the object file into U-Boot, thus increasing file size. Drop these usages. An older version of this patch was submitted here: http://patchwork.ozlabs.org/patch/1205784/ Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: core: Use assert_noisy() in devresSimon Glass
Use this macros instead of the linux ones, as the output is smaller. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07virtio: rng: Add a random number generator(rng) driverSughosh Ganu
Add a driver for the virtio-rng device on the qemu platform. The device uses pci as a transport medium. The driver can be enabled with the following configs CONFIG_VIRTIO CONFIG_DM_RNG CONFIG_VIRTIO_PCI CONFIG_VIRTIO_RNG Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2020-01-07sandbox: rng: Add a random number generator(rng) driverSughosh Ganu
Add a sandbox driver for random number generation. Mostly aimed at providing a unit test for rng uclass. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07stm32mp1: rng: Add a driver for random number generator(rng) deviceSughosh Ganu
Add a driver for the rng device found on stm32mp1 platforms. The driver provides a routine for reading the random number seed from the hardware device. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com> Remove a superfluous blank line Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07clk: stm32mp1: Add a clock entry for RNG1 deviceSughosh Ganu
Add an entry for allowing clock enablement for the random number generator peripheral, RNG1. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-07dm: rng: Add random number generator(rng) uclassSughosh Ganu
Add a uclass for reading a random number seed from a random number generator device. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07power: regulator: support off-on-delay-usPeng Fan
off-on-delay-us has been supported by Linux, so let's use it. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-07remoteproc: stm32: load resource table from firmwareFabien Dessenne
Load the optional resource table from the firmware, and write its address in the dedicated backup register. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
generated by cgit (git 2.34.1) at 2024-12-27 07:21:56 +0000