summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-11-28spl: add USB Gadget config optionStefan Agner
Introduce USB Gadget config option. This allows to combine Makefile entries for SPL_USBETH_SUPPORT and SPL_DFU_SUPPORT. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Ravi Babu <ravibabu@ti.com>
2016-11-28spl: dfu: move DFU Kconfig to SPL KconfigStefan Agner
The DFU Kconfig menu entries should be part of the SPL Kconfig file. Also avoid using the top level Makefile by moving the config dependent build artifacts to the driver/ and driver/usb/gadget/ Makfiles. With that, DFU can be built again in SPL if CONFIG_SPL_DFU_SUPPORT is enabled. Fixes: 6ad6102246d8 ("usb:gadget: Disallow DFU in SPL for now") Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-11-28bootcounter_ram: Fix misaligned cache warningStefan Roese
This patch fixes the warning about misaligned cache on Armada XP: CACHE: Misaligned operation at range [7ffff000, 7fffffac] Signed-off-by: Stefan Roese <sr@denx.de> Cc: Valentin Longchamp <valentin.longchamp@keymile.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-28sun8i_emac: Fix mdio read sequencePhilipp Tomsich
To send a parametrized command to the PHY over MDIO, we should write the data first, the trigger the execution by the command register write. Fix the access pattern in our MDIO write routine. Apparently this doesn't really matter with the Realtek PHY on the Pine64, but other PHYs (which require more setup) will choke on the wrong order. [Andre: add commit message] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jagan Teki <jagan@openedev.com>
2016-11-28mtd: nand: add support for the TC58NVG2S0H chipBoris Brezillon
Add the description of the Toshiba TC58NVG2S0H SLC nand to the nand_ids table so we can use the NAND ECC infos and the ONFI timings. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-11-26Merge git://git.denx.de/u-boot-rockchipTom Rini
2016-11-25rockchip: video: Avoid using u8 in the HDMI driverSimon Glass
It makes not sense using u8 to hold a value on a 32-bit or 64-bit machine. It can only bloat the code by forcing the compiler to mask the value. Change it to uint. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25rockchip: clk: Support setting ACLKSimon Glass
Add basic support for setting the ARM clock, since this allows us to run at maximum speed in U-Boot. Currently only a single speed is supported (1.8GHz). Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25rockchip: video: Check for device in useSimon Glass
Check whether a display device is in use before using it. Add a comment as to why two displays cannot currently be used at the same time. This allows us to remove the device-tree change that disables vopb on jerry. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25video: Track whether a display is in useSimon Glass
Mark a display as in use when display_enable() is called. This can avoid a display being used by multiple video-output devices. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25video: Use cache-alignment in video_sync()Simon Glass
Sometimes the frame buffer is not a multiple of the cache line size. Adjust the cache-flushing code to avoid cache warnings/errors in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25spi: Add a debug() on bind failureSimon Glass
This is an uncommon error but we may as well have a debug() message when it happens. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25rockchip: spi: Honour the deactivation delaySimon Glass
This is not currently implemented. Add support for this so that the Chrome OS EC can be used on jerry. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25rockchip: spi: Add support for of-platdataSimon Glass
Allow this driver to be used with of-platdata on rk3288. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25spi: Add of-platdata support to SPI and SPI flashSimon Glass
Some boards may want to use these subsystems with of-platdata in SPL. Add support for this by avoiding any device tree access in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25rockchip: video: Correct VOP clock selectionSimon Glass
This code incorrectly uses the oscillator. It should use the clock selected in the device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 135aa95 (clk: convert API to match reset/mailbox style)
2016-11-25rockchip: video: Correct HDMI data source selectionSimon Glass
This code currently always selects the second source. It only worked because both sources are set up. With the change to only init video devices that are present in the stdout environment variable, this fails. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25power: regulator: Add limits checking while setting currentKeerthy
Currently the specific set ops functions are directly called without any check for min/max current limits for a regulator. Check for them and proceed. Signed-off-by: Keerthy <j-keerthy@ti.com> Fixed checking of current limits: Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25power: regulator: Add limits checking while setting voltageKeerthy
Currently the specific set ops functions are directly called without any check for voltage limits for a regulator. Check for them and proceed. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Fixed checking of voltate limits: Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: arch/arm/Kconfig
2016-11-25power: regulator: Introduce regulator_set_value_force functionKeerthy
In case we want to force a particular value on a regulator irrespective of the min/max constraints for testing purposes one can call regulator_set_value_force function. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-23serial: pxa: integrate optional driver model handlingMarcel Ziswiler
Optional driver model handling integration. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Marek Vasut <marex@denx.de>
2016-11-23serial: pxa: use kconfig for serial configurationMarcel Ziswiler
Migrate the PXA serial driver to be configured via Kconfig. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Marek Vasut <marex@denx.de>
2016-11-22Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2016-11-22sf: Add support for MX66U51235F, MX66L1G45G, MT25QU02G, MT25QL02GRadu Bacrau
This commit adds support for the Macronix MX66U51235F, MX66L1G45G and Micron MT25QU02G, MT25QL02G flash parts. Signed-off-by: Radu Bacrau <dumitru.bacrau@intel.com> Cc: Chin Liang See <clsee@altera.com> Cc: Radu Bacrau <radu.bacrau@gmail.com> [Update proper commit header and 80-line cut on body] Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-21gpio: dwapb: Add support for port BPhil Edworthy
The IP supports two ports, A and B, each providing up to 32 gpios. The driver already creates a 2nd gpio bank by reading the 2nd node from DT, so this is quite a simple change to support the 2nd bank. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-21driver: net: ldpaa_eth: Fix missing bracket issuePriyanka Jain
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21lpuart: add a get_lpuart_clk functionShaohui Xie
It's not always true that LPUART clock is CONFIG_SYS_CLK_FREQ. This patch provides a weak function get_lpuart_clk(), so that the clock can be ovreridden on a specific board which uses different clock for LPUART. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> [YS: Reformat commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21drivers: SPI: sunxi SPL: fix warningAndre Przywara
Somehow an int returning function without a return statement sneaked in, fix it. Also fix some whitespace damage on the way. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-19sf: Fix s25fs512s id tableJagan Teki
s25fs512s and s25fl512s_256k have common id information till 5 bytes and 6th byte have different family id like FS and FL-S as 0x81 and 0x80. Reported-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
2016-11-19sf: dataflash: Minor cleanupsJagan Teki
- fix single line comments - remove unneeded spaces - ascending order of include files - rename SPI DATAFLASH to dataflash - rename SPI DataFlash to dataflash - return NULL replaced with error code Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-19sf: dataflash: Fix add_dataflash return logicJagan Teki
This patch fixed the add_dataflash return logic, so-that it can handle both jedec and older chips same as Linux. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-19sf: dataflash: Move flash id detection into jedec_probeJagan Teki
Flash id detection should be the first step to enumerate the connected flash on the board, once ie done checking with respective id codes locally in the driver all this should be part of jedec_probe instead of id detection and validated through flash_info{} table separatly. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-19sf: dataflash: Remove unneeded spi dataJagan Teki
dataflash doesn't require options, memory_map from spi. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: York Sun <york.sun@nxp.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-19spi: Remove dual flash options/flagsJagan Teki
Dual flash code in spi are usually take the spi controller to work with dual connected flash devices. Usually these dual connection operation's are referred to flash controller protocol rather with spi controller protocol, these are still present in flash side for the usage of spi-nor controllers. So, this patch remove the dual_flash options or flags in sf which are triggered from spi controller side. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-18sf: Rename few local functionsJagan Teki
spi_flash_write_bar-> write_bar spi_flash_write_bar -> read_bar spi_flash_cmd_wait_ready -> spi_flash_wait_till_ready Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-18sf: ids: Use small letter in ext_jedecJagan Teki
Use small 'd' in s25s512s ext_jedec Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2016-11-18sf: ids: Use small letter's with flash nameJagan Teki
For readability use small letter's with flash name. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2016-11-18sf: Rename sf_params.c to spi_flash_ids.cJagan Teki
Now the flash params table as renamed to spi_flash_ids structure, so rename the sf_params.c to spi_flash_ids.c and remove the legacy. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2016-11-18sf: Remove non-meaningful commentsJagan Teki
Remove unneeded/non-meaningful commit message on params and flash. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2016-11-18sf: Remove spansion_s25fss_disable_4KB_eraseJagan Teki
In spansion S25FS-S family the physical sectors are grouped as normal and parameter sectors. Parameter sectors are 4kB in size with 8 set located at the bottom or top address of a device. Normal sectors are similar to other flash family with sizes of 64kB or 32 kB. To erase whole flash using sector erase(D8h or DCh) won't effect the parameter sectors, so in order to erase these we must use 4K sector erase commands (20h or 21h) separately. So better to erase the whole flash using 4K sector erase instead of detecting these family parts again and do two different erase operations. For this: - Removed spansion_s25fss_disable_4KB_erase code - Add SECT_4K for S25FS512S chip Cc: Yunhui Cui <yunhui.cui@nxp.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
2016-11-18sf: params: Add S25FS256S_64K spi flash supportJagan Teki
Add Spansion S25FS256S_64K spi flash to the list of spi_flash_ids. In spansion S25FS-S family the physical sectors are grouped as normal and parameter sectors. Parameter sectors are 4kB in size with 8 set located at the bottom or top address of a device. Normal sectors are similar to other flash family with sizes of 64kB or 32 kB. To erase whole flash using sector erase(D8h or DCh) won't effect the parameter sectors, so in order to erase these we must use 4K sector erase commands (20h or 21h) separately. So better to erase the whole flash using 4K sector erase instead of detecting these family parts again and do two different erase operations. Cc: Yunhui Cui <yunhui.cui@nxp.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-18sf: Add INFO6 flash_info macroJagan Teki
INFO6 is for tabulating 6 byte flash parts, Ex: S25FS256S_64K Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
2016-11-18sf: Increase max id length by 1 byteJagan Teki
So, now SPI_FLASH_ID_MAX_LEN is 6 bytes useful for few spansion flash families S25FS-S Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2016-11-18sf: Add SPI_FLASH_MAX_ID_LENJagan Teki
Add id length of 5 bytes numerical value to macro. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
2016-11-18sf: nr_sectors -> n_sectorsJagan Teki
Rename nr_sectors as n_sectors to sync with Linux. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2016-11-18sf: Cleanup spi_flash_info{}Jagan Teki
- Proper tabs spaces - Removed unnecessary - Add comments in spi_flash_info members - Add comments for spi_flash_info.flags Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-18sf: sandbox: Use JEDEC_MFR|ID in id exctractJagan Teki
Instead of extracting id's separately better to use JEDEC_MFR|ID for code simplicity. Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
2016-11-18sf: Simplify lock ops detection codeJagan Teki
Simplify the flash_lock ops detection code and added meaningful comment. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
2016-11-18sf: Adopt flash table INFO macro from LinuxJagan Teki
INFO macro make flash table entries more adjustable like adding new flash_info attributes, update ID length bytes and so on and more over it will sync to Linux way of defining flash_info attributes. - Add JEDEC_ID - Add JEDEC_EXT macro - Add JEDEC_MFR - spi_flash_params => spi_flash_info - params => info Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
generated by cgit (git 2.34.1) at 2024-12-28 04:05:09 +0000