summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-07-11usb: dwc2: use dev_read_bool() instead of fdt_getprop()Meng Dongyang
Use dev_read_bool() instead of fdt_getprop() to get the property from DTS. And add a comment for "hnp-srp-disable" property to fully describe its effect. Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11usb: Kconfig: migrate USB_DWC2 to KconfigPhilipp Tomsich
This change migrates the USB_DWC2 configuration item to Kconfig and runs moveconfig to adjust header files and defconfig. Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com> Split off into a separate patch: Ran moveconfig to migrate other boards: Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11usb: host: xhci-rockchip: use fixed regulator to control vbusMeng Dongyang
Use fixed regulator to control the voltage of vbus. Enable vbus supply when usb start and disable vbus supply when usb stop. Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11usb: Kconfig: config USB_XHCI_ROCKCHIP depends on DM_REGULATOR and DM_USBMeng Dongyang
The xhci-rockchip driver depends on DM_REGULATOR and DM_USB. So add dependent features for xhci-rockchip driver in Kconfig. Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: video: mipi: Modify format type for debug messageeric.gao@rock-chips.com
Modify format type for debug message. Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
2017-07-11rockchip: video: mipi: Modify variable type for arm32 compatibilityeric.gao@rock-chips.com
Some address relevant varibable is defined originally as u64. To compatible with arm32, this patch change them to uintptr_t type. Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-11Revert "mmc: dw_mmc: rockchip: select proper card clock"Kever Yang
The origin patch get rockchip dwmmc by name 'ciu', which lead to the SPL not able to remove 'clock-names' node in dts. I'm not saying this is not correct, but I would prefer to handle this in dts or clock driver to save memory for SPL. For example the rk3288 SPL size has out of memory if not enable BACK_TO_BROM option, there are many other SoCs has less internal memory than rk3288. This reverts commit 480a9b834c661fc88217f50bdf780192c3018d66. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: dwmmc: use max-frequency when OF_PLATDATA enabledKever Yang
Since the 'clock-freq-min-max' is deprecated, we use max-frequency for all rockchip SoC dwmmc controller. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: rk322x: add sysreset driverKever Yang
Rockchip rk322x sysreset is much like rk3036 and other Rockchip SoCs, only difference is that the target register address is different. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: rk322x: add pinctrl driverKever Yang
Add init pinctrl driver support for: - i2c; - spi; - uart; - pwm; - emmc/sdmmc; Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: rk322x: add clock driverKever Yang
Add clock driver init support for: - cpu, bus clock init; - emmc, sdmmc clock; - ddr clock; Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Fixed format specified (%x -> %p) in clk_rk322x.c: Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: ns16550: dm: convert fdt_get to dev_readPhilipp Tomsich
With the new dev_read functions available, we can convert the rockchip architecture-specific drivers and common drivers used by these devices over to the dev_read family of calls. This covers the serial driver (ns16550 and compatible) used for the Rockchip devices. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-11rockchip: net: dm: convert fdt_get to dev_readPhilipp Tomsich
With the new dev_read functions available, we can convert the rockchip architecture-specific drivers and common drivers used by these devices over to the dev_read family of calls. This covers the Gigabit Ethernet MAC (i.e. common designware driver and rockchip-specific wrapper). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-11rockchip: mmc: dm: convert fdt_get to dev_readPhilipp Tomsich
With the new dev_read functions available, we can convert the rockchip architecture-specific drivers and common drivers used by these devices over to the dev_read family of calls. This covers the dw_mmc and sdhci wrapper drivers for Rockchip. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-11rockchip: xhci: dm: convert fdt_get to dev_readPhilipp Tomsich
With the new dev_read functions available, we can convert the rockchip architecture-specific drivers and common drivers used by these devices over to the dev_read family of calls. This change covers the USB3 (xhci) driver for the Rockchip devices. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-11rockchip: spi: dm: convert fdt_get to dev_readPhilipp Tomsich
With the new dev_read functions available, we can convert the rockchip architecture-specific drivers and common drivers used by these devices over to the dev_read family of calls. This change covers the rk_spi.c (SPI driver) used in Rockchip devices. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-11rockchip: pinctrl: dm: convert fdt_get to dev_readPhilipp Tomsich
With the new dev_read functions available, we can convert the rockchip architecture-specific drivers and common drivers used by these devices over to the dev_read family of calls. This change covers the pinctrl drivers for the Rockchip devices. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-10pipe3: Fix broken dependencyJean-Jacques Hiblot
ARCH_OMAP2 has been renamed ARCH_OMAP2PLUS in commit a93fbf4a7892 ("ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate Kconfig") Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-10mtd: stm32: use parameter instead of default valuePatrice Chotard
To set wait state, a hard coded value is used instead of using latency parameter. stm32_flash_latency_cfg() is currently used in arch/arm/mach-stm32/stm32f4/clock.c and in drivers/clk/clk_stm32f7.c with, in both case, "5" as parameter. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-07-10driver: mmc: update debug infoJorge Ramirez-Ortiz
This driver is used in another board; remove board information from the driver debug log. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-10pinctrl: stm32: add set_state opsChristophe Kerello
set_state_ops is kept under PINCTRL_FULL flag in order to decrease memory footprint in some configuration. PINCTRL_FULL can be enabled for debug purpose. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-07-10pinctrl: stm32: handle a configuration listChristophe Kerello
This patch handles a configuration list behind pinctrl-0 like pinctrl-0 = <&qspi_clk_a &qspi_bk1_a &qspi_bk2_a>; Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
2017-07-08powerpc, 8xx: Add support for MCR3000 board from CSSIChristophe Leroy
CS Systemes d'Information (CSSI) manufactures two boards, named MCR3000 and CMPC885 which are respectively based on MPC866 and MPC885 processors. This patch adds support for the first board. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-08powerpc, 8xx: move Serial driver to drivers/serial/Christophe Leroy
At the same time, move to Kconfig Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-08powerpc, 8xx: move SPI driver to drivers/spi/Christophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-08powerpc, 8xx: move FEC Ethernet driver in drivers/netChristophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-08powerpc, 8xx: Migrate to KconfigChristophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-07wdt: Unify option of timeout valueAndy Shevchenko
There is no need to duplicate same option with different name. Kill HW_WATCHDOG_TIMEOUT_MS in favor of WATCHDOG_TIMEOUT_MSECS. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-07wdt: Fix spelling Resettting -> ResettingAndy Shevchenko
Fix spelling Resettting -> Resetting. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-06avr32: Retire AVR32 for goodAndy Shevchenko
AVR32 is gone. It's already more than two years for no support in Buildroot, even longer there is no support in GCC (last version is heavily patched 4.2.4). Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully). There is no good point to keep this support in U-Boot either. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-06gpio: add static to get_function()Masahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-06serial: make serial_stub_* to static functionsMasahiro Yamada
Add missing static to serial_stub_puts(). Unexport serial_stub_{getc,tstc} because they are used locally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-03powerpc: remove 4xx supportHeiko Schocher
There was for long time no activity in the 4xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 4xx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-07-03drivers, block: remove sil680 driverHeiko Schocher
driver is not used anymore, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-29drivers, usb, gadget: fix compiler warnings for at91_udc.cHeiko Schocher
fix warnings: drivers/usb/gadget/at91_udc.c:1344:12: warning: 'at91rm9200_udc_init' defined but not used [-Wunused-function] drivers/usb/gadget/at91_udc.c:1379:13: warning: 'at91rm9200_udc_pullup' defined but not used [-Wunused-function] drivers/usb/gadget/at91_udc.c:1476:12: warning: 'at91sam9263_udc_init' defined but not used [-Wunused-function] Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-29usb: gadget: Call g_dnl_bind_fixup() before testing g_dnl_serial lengthLukasz Majewski
After the commit SHA1: 842778a091 - the serial number descriptor is only visible when we have non zero length of g_dnl_serial. However, on some platforms (e.g. Siemens) the serial number is set at g_dnl_bind_fixup(), so with the current code we will always omit the serial (since it is not set). This commit moves the g_dnl_bind_fixup() call before the g_dnl_serial length test. Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Heiko Schocher <hs@denx.de> Tested-by: Heiko Schocher <hs@denx.de>
2017-06-28ti816x: Enable ethernet supportTom Rini
The ti816x SoC revision of the ethernet IP block is handled by the "davinci_emac" driver, rather than the "cpsw" driver as done by later members of the family. Enable the relevant plumbing. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-27Merge git://git.denx.de/u-boot-x86Tom Rini
2017-06-27Merge git://www.denx.de/git/u-boot-imxTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: include/configs/imx6qdl_icore_rqs.h include/configs/imx6ul_geam.h include/configs/imx6ul_isiot.h
2017-06-27Revert "x86: Convert MMC to driver model"Bin Meng
This reverts commit ddb3ac3c716f56cead695444e65a7ba7b0946555. With MMC converted to driver model, SCSI driver is broken due to zero address access at (ops->read) in block_dread() function. The fix (SCSI driver converted to DM) is ready in u-boot-dm branch, but it is too late for this relese to get that in. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-26Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini
2017-06-26i2c_eeprom: add static to i2c_eeprom_std_ops/probeMasahiro Yamada
These are only used in drivers/mis/i2c_eeprom.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-06-24Merge git://git.denx.de/u-boot-uniphierTom Rini
- fix sparse warnings - sync DT with Linux - add new board support (LD11/LD20 global)
2017-06-25ARM: uniphier: fix various sparse warningsMasahiro Yamada
Fix warnings reported by sparse: - ... was not declared. Should it be static?" - cast to restricted __be32 While fixing those, the type conflict of cci500_init() was found. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-23Merge branch 'master' of git://git.denx.de/u-boot-rockchipTom Rini
2017-06-23rockchip: clk: rk3036: correct setting for pll integer modeKever Yang
According to rk3036 TRM, pll_con1[12] should be set to '1' for the pll integer mode, while the '0' means the frac mode. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-06-23serial, kconfig: fix menutextHeiko Schocher
fix menutext for the options SPL_DM_SERIAL and TPL_DM_SERIAL. Both have the same text as DM_SERIAL, which is confusing. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2017-06-23mtd: OneNAND: Fix onenand_block_markbadLadislav Michl
commit dfe64e2c89731a3f9950d7acd8681b68df2bae03 Author: Sergey Lapin <slapin@ossfans.org> Date: Mon Jan 14 03:46:50 2013 +0000 mtd: resync with Linux-3.7.1 modified onenand_block_markbad to call mtd_block_markbad, but as _block_markbad function pointer used by mtd_block_markbad to do actual job is by default pointing back to onenand_block_markbad there is no way this function ever finishes its job. Fix it by changing function body according current (4.12-rc6) linux implementation. Tested on IGEPv2 board with Muxed OneNAND(DDP) 512MB containing several unerasable blocks this function marked bad. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2017-06-23onenand_spl_simple: Add DDP OneNAND supportLadislav Michl
Current implementation is unable to access second half of DDP OneNAND flash (reads first half mirrored). Use block and bufferram address calculations from onenand_base to fix this. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2017-06-23onenand_spl_simple: Call onenand_spl_get_geometry() only onceLadislav Michl
Do not call onenand_spl_get_geometry() for each block read. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
generated by cgit (git 2.34.1) at 2024-12-27 21:32:07 +0000