summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-12-03mmc: davinci: fix mmc boot in SPLBartosz Golaszewski
The MMC boot is currently broken on omapl138-lcdk after enabling the driver model in SPL. The main problem is the driver's bind callback not being called after probe in SPL (even with the DM_FLAG_PRE_RELOC flag specified). While a proper fix is still being worked on, this hacky changeset at least fixes the MMC boot on this platform by calling mmc_bind() manually from probe(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03mmc: davinci: drop struct davinci_mmc_platBartosz Golaszewski
struct mmc_config & struct mmc don't need to be exported over platform data, but can instead be private in the driver. Remove struct davinci_mmc_plat. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03mmc: davinci: drop support for ti,dm6441-mmcBartosz Golaszewski
The DM family of DaVinci SoCs is no longer supported. Drop the irrelevant code from the driver. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03blk: Make use of CONFIG_HAVE_BLOCK_DEVICE moreTom Rini
When we do not have CONFIG_BLK (or SPL/TPL) enabled there are very few cases where we need the blk_legacy code linked in. To catch these, build when we have CONFIG_HAVE_BLOCK_DEVICE set. In addition, we only need cmd/blk_common.o to be linked in when we have CONFIG_HAVE_BLOCK_DEVICE set, so make use of that directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03mtd: mtdcore: Drop unused mtd_tableTom Rini
The array 'mtd_table' is unused in the code. Remove this as gcc doesn't always discard unused global variables. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03pci: Only link pci_rom.o in some casesTom Rini
The content of pci_rom.c is only used in a few cases. Only build and link in these cases to avoid a global variable as gcc doesn't always discard those when they are unused. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03Convert CONFIG_SYS_CORTINA_FW_IN_MMC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_CORTINA_FW_IN_MMC CONFIG_SYS_CORTINA_FW_IN_NAND CONFIG_SYS_CORTINA_FW_IN_NOR CONFIG_SYS_CORTINA_FW_IN_REMOTE CONFIG_SYS_CORTINA_FW_IN_SPIFLASH Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03Kconfig: make TPL_DM_SERIAL depend on TPL_DMThomas Hebb
This missing dependency seems like an oversight, since all other TPL_DM_* options have it. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-12-02common: Move old EEPROM functions into a new headerSimon Glass
These functions do not use driver model but are still used. Move them to a new eeprom.h header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move pci_init_board() out of common.hSimon Glass
This function can be dropped when all boards use driver model for PCI. For now, move it into init.h with a comment. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move board_get_usable_ram_top() out of common.hSimon Glass
Move this function into init.h which seems to be designed for this sort of thing. Also update the header to declare struct global_data so that it can be included without global_data.h being needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move command functions out of common.hSimon Glass
Move these functions into the command.h header file which is a better fit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move enable/disable_interrupts out of common.hSimon Glass
Move these two functions into the irq_funcs.h header file. Also move interrupt_handler_t as this is used by the irq_install_handler() function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move interrupt functions into a new headerSimon Glass
These functions do not use driver model but are fairly widely used in U-Boot. But it is not clear that they will use driver model anytime soon, so we don't want to label them as 'legacy'. Move them to a new irq_func.h header file. Avoid the name 'irq.h' since it is widely used in U-Boot already. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move ARM cache operations out of common.hSimon Glass
These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some cache and MMU functions out of common.hSimon Glass
These functions belong in cpu_func.h. Another option would be cache.h but that code uses driver model and we have not moved these cache functions to use driver model. Since they are CPU-related it seems reasonable to put them here. Move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move mii_init() function out of common.hSimon Glass
This function belongs in mii.h so move it over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move get_ticks() function out of common.hSimon Glass
This function belongs in time.h so move it over and add a comment. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move wait_ticks functions out of common.hSimon Glass
This function belongs in time.h so move it over and add a comment. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some time functions out of common.hSimon Glass
These functions belong in time.h so move them over and add comments. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move serial_printf() to the serial headerSimon Glass
Move this function header to serial.h since this function is clearly related to serial. The function itself stays in console.c since we don't have a single serial file. DM and non-DM each has a separate file so we would have to either create a new common serial file, or repeat the function in both serial.c and serial-uclass.c, neither of which seem worthwhile. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02serial: usb: Correct the usbtty_...() prototypesSimon Glass
The function declarations in serial.h are not in sync with what is currently used in usbtty. Fix this by updating the header and including it, to help catch future such problems. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02Move strtomhz() to vsprintf.hSimon Glass
At present this function sits in its own file but it does not really justify it. There are similar string functions in vsprintf.h, so move it there. Also add the missing function comment. Use the vsprintf.h include file explicitly where needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02crc32: Use the crc.h header for crc functionsSimon Glass
Drop inclusion of crc.h in common.h and use the correct header directly instead. With this we can drop the conflicting definition in fw_env.h and rely on the crc.h header, which is already included. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Drop linux/crc8.hSimon Glass
We have an existing U-Boot header for the one function that this defines. Use that instead of the linux/ one. Move over the nice comment. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02status_led: Tidy up the code styleSimon Glass
There are a few whitespace problems with this code. Tidy them up. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Drop global inclusion of status_led.hSimon Glass
This is only used by a few files so it should not be in the common header. Move it out. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02Drop CONFIG_SHOW_ACTIVITYSimon Glass
This feature is not enabled by any board. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-28Merge git://git.denx.de/u-boot-usbTom Rini
- USB keyboard improvements
2019-11-27mmc: tmio: sdhi: Add calibration tablesMarek Vasut
Instead of using single fixed value for the calibration offset, add tables which dynamically adjust this per calibration code from the SCC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mmc: tmio: sdhi: Skip bad tapsMarek Vasut
Some of the tuning taps produce suboptimal results. Add code which skips those "bad" taps. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mmc: tmio: sdhi: Add SCC error checkingMarek Vasut
Check SCC for errors after check command if applicable and optionally adjust the bus skew settings accordingly. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mmc: tmio: sdhi: Disable auto-retuning in HS400Marek Vasut
Disable the auto-retuning in HS400 mode in favor of manual calibration. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mmc: tmio: sdhi: Adjust HS400 calibration offsetsMarek Vasut
Adjust the TMPPORT3 offsets according to the latest information from the chip vendor. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mmc: tmio: sdhi: Adjust DT2FF settings for HS400 modeMarek Vasut
Adjust the DT2FF offsets in HS400 according to latest information from the chip vendor. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mmc: tmio: sdhi: Use 4 tuning taps on M3W up to ES1.2Marek Vasut
The M3W up to ES1.2 uses 4 tuning taps for HS400, make it so. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mmc: tmio: sdhi: Track SMPCMP valu in private dataMarek Vasut
Retain the SMPCMP value from last calibration in private data. This will be later used for skipping bad taps. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mmc: tmio: sdhi: Track current tap number in private dataMarek Vasut
Retain the tap number from last calibration in private data. This will be later used for SCC error checking after each command. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mmc: fsl_esdhc: get clock directly from global dataYangbo Lu
This patch is to get clock directly from global data. - Remove uclass clk api method. This was what i.MX platforms were using, while QorIQ platforms weren't. - Get clock only from global data, dropping mxc_get_clock(). QorIQ eSDHC controllers on one silicon use same reference clock. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-27mmc: sdhci: make sdhci_get_cd staticBaruch Siach
sdhci_get_cd() is not referenced anywhere else. Limit its scope to sdhci.c. Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2019-11-25Merge tag 'rpi-next-2020.01' of https://github.com/mbgg/u-bootTom Rini
- add RPi4 upstream compatible to pinctrl - fix boot banner on RPi3/4 - add support for one binary on RPi3/4
2019-11-25dm: test: usb: rework keyboard testHeinrich Schuchardt
Allow the unit test to pass full 8 byte scan code sequences to the USB keyboard emulation driver and to parse multi-byte escape sequences. The following features are not yet tested: * LED status * caps-lock * num-lock * numerical pad keys The following features are not yet implemented by the USB keyboard driver and therefore not tested: * modifiers for non-alpha-numeric keys, e.g. <SHIFT><TAB> and <ALT><F4> * some special keys, e.g. <PRINT> * some modifiers, e.g. <ALT> and <META> * alternative keyboard layouts Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-25usb: kbd: implement special keysHeinrich Schuchardt
Provide support for F1-F12, Insert, Delete, Home, End, Page Up, Page Down. As this leads to a size increase provide a customizing setting CONFIG_USB_KEYBOARD_FN_KEYS. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-24Revert "video: mxsfb: Configure the clock after eLCDIF reset"Fabio Estevam
Commit ec3dcea74470 ("video: mxsfb: Configure the clock after eLCDIF reset") causes boot regression on imx7d-pico/imx7d-sdb boards, so revert it until a better solution is prepared. This reverts commit ec3dcea7447031463643c33143b3a5f027f0b54d. Reported-by: Joris Offouga <offougajoris@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-11-24drivers: bcm283x: Set pre-location flag for OF_BOARDMatthias Brugger
U-Boot support on Raspberry Pi 4 relies on the device-tree provided by the firmware. The blob does not contain the U-Boot specific pre-loc-rel properties. The result is, that the U-Boot banner is not printed. We fix this by setting the DM_FLAG_PRE_RELOC flag in the driver, if we rely on a device-tree provided by the firmware. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-24pinctrl: bcm283x: Add compatible for RPi4Matthias Brugger
The Raspberry Pi 4 upstream kernel device tree instroduces a new compatible for the pinctroller. Add this to the driver so that we can boot with the upstream kernel DT. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-23Merge tag 'u-boot-rockchip-20191124' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Clean vid/pid in Kconfig and add fastboot for rk3399 - add 'u-boot, spl-fifo-mode' for mmc - Use FIT generator for rk3229 optee and rk3368 ATF - fan53555: add support for Silergy SYR82X and SYR83X
2019-11-23rockchip: dwmmc: add handling for u-boot, spl-fifo-modeHeiko Stuebner
Rockchips dwmmc controllers can't do dma to non-ddr addresses, like for example the soc-internal sram but during boot parts of TrustedFirmware need to be placed there from the read FIT image. So add handling for a u-boot,spl-fifo-mode to not put the mmc controllers into fifo mode for all time. The regular fifo-mode property still takes precedent and only if not set do we check for the spl-specific property. Suggested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-11-23gadget: rockchip: Add rk3399 USB_GADGET_PRODUCT_NUMJagan Teki
Add 0x330c for rk3399 gadget product number. Tested-by: Levin Du <djw@t-chip.com.cn> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23usb: dwc3: Add phy interface for dwc3_ubootJagan Teki
U-Boot has two different variants of dwc3 initializations, - with dm variant gadget, so the respective dm driver would call the dwc3_init in core. - with non-dm variant gadget, so the usage board file would call dwc3_uboot_init in core. The driver probe would handle all respective gadget properties including phy interface via phy_type property and then trigger dwc3_init for dm-variant gadgets. So, to support the phy interface for non-dm variant gadgets, the better option is dwc3_uboot_init since there is no dedicated controller for non-dm variant gadgets. This patch support for adding phy interface like 8/16-bit UTMI+ code for dwc3_uboot. This change used Linux phy.h enum list, to make proper code compatibility. Cc: Marek Vasut <marex@denx.de> Tested-by: Levin Du <djw@t-chip.com.cn> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit (git 2.34.1) at 2024-12-26 07:30:12 +0000