summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-06-30Merge tag 'mips-pull-2020-06-29' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mips into next - net: pcnet: cleanup and add DM support - Makefile: add rule to build an endian-swapped U-Boot image used by MIPS Malta EL variants - CI: add Qemu tests for MIPS Malta
2020-06-30arm: pxa: mmc: add driver model supportMarcel Ziswiler
Add driver model (DM) support. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2020-06-30kconfig: mmc: move pxa_mmc_generic to kconfigMarcel Ziswiler
Move CONFIG_PXA_MMC_GENERIC to Kconfig. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-30dm: core: gracefully handle alias seq without ofMarcel Ziswiler
Gracefully handle alias seq in the platform data rather than OF case. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2020-06-30mmc: add missing space before comment delimiterMarcel Ziswiler
Add missing space before a comment delimiter. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-29net: pcnet: Add Kconfig entriesMarek Vasut
Add Kconfig entries for the pcnet driver and convert MIPS malta to use those. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Add DM supportMarek Vasut
With all the changes in place, add support for DM into the pcnet driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Split common and non-DM functionsMarek Vasut
Pull the common parts of functions out so they can be reused by both DM and non-DM code paths. The recv() function had to be reworked to fit into this scheme and this means it now only receives one packet at a time instead of spinning in an endless loop. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Wrap name and enetaddr into private dataMarek Vasut
Instead of using the non-DM-only name and enetaddr in struct eth_device, add pointers into the private data which can either point to that non-DM name or a DM one later on. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Wrap iobase into private dataMarek Vasut
Instead of using the non-DM-only iobase in struct eth_device, add one into the private data to make DM and non-DM operation possible. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Pass private data through dev->privMarek Vasut
Get rid of the global point to private data, and rather pass it thought dev->priv. Also remove the unnecessary check for lp being non-NULL, since it is always NULL at this point. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Wrap devbusfn into private dataMarek Vasut
Instead of using eth_device priv for this PCI devbusfn, free it so it could be used for driver private data, and wrap devbusfn into those driver private data. Note that using the name dev for the variable is a trick left for later, when DM support is in place, so dm_pci_virt_to_mem() can be used with minimal ifdeffery. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Drop useless forward declarationsMarek Vasut
Remove those as they are not needed anymore. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Move initialize function at the endMarek Vasut
Move the function at the end of the driver, so we could drop various forward declarations later. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Move private data allocation to initializeMarek Vasut
The private data allocation does not have to be done every time the NIC is initialized at run time, move the allocation to initialize function, which means it will be done only once when the driver starts. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Replace memset+malloc with callocMarek Vasut
This combination of functions can be replaced with calloc(), make it so. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Simplify private data allocationMarek Vasut
The current code is horribly complex. Both the RX and TX buffer descriptors are 16 bytes in size, the init block is 32 bytes in size, so simplify the code such that the entire private data of the driver are allocated cache aligned and the RX and TX buffer descriptors are part of the private data. This removes multiple malloc calls and cache flushes. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Use PCI_DEVICE() to define PCI device compat listMarek Vasut
Use this macro to fully fill the PCI device ID table. This is mandatory for the DM PCI support, which checks all the fields. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Drop PCNET_HAS_PROMMarek Vasut
All of one PCNET users has this option set, make this default and drop this config option. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Drop typedef struct pcnet_priv_tMarek Vasut
Use struct pcnet_priv all over the place instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29Convert CONFIG_CADENCE_QSPI to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CADENCE_QSPI Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-29spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*Lukasz Majewski
This change allows more fine tuning of driver model based SPI support in SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI support in SPL and TPL via Kconfig option. Before this change it was necessary to use: /* SPI Flash Configs */ #if defined(CONFIG_SPL_BUILD) #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH #undef CONFIG_SPI_FLASH_MTD #endif in the ./include/configs/<board>.h, which is error prone and shall be avoided when we strive to switch to Kconfig. The goal of this patch: Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL). Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must still support non DM driver. Another use case is the conversion of non DM/DTS SPI driver to support DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the distinction is needed in Kconfig (also if SPL version of the driver supports OF_PLATDATA). In the end of the day one would have to support following use cases (in single driver file - e.g. mxs_spi.c): - U-Boot proper driver supporting DT/DTS - U-Boot proper driver without DT/DTS support (deprecated) - SPL driver without DT/DTS support - SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to run full blown DT/DTS) - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained environment with no fitImage and OF_LIBFDT support). Some boards do require SPI support (with DM) in SPL (TPL) and some only have DM_SPI{_FLASH} defined to allow compiling SPL. This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [trini: Fixup a few platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-29video: rockchip: fix HDMI 4K resolutionAnatolij Gustschin
3480 is not valid XRES, use 3840 as default. Fixes: 05c65a82c3c1 ("video: rockchip: Support 4K resolution for rk3399, HDMI") Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # roc-rk3399-pc
2020-06-28Merge tag 'fixes-for-v2020.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - fix logo on mx6ul_14x14_evk with DM_VIDEO enabled - fix banner string overwriting the logo on small displays - fix splash warning when building for ARM64 - fix STM32 DSI driver to probe only on supported hardware - fix memory corruption with DSI panel drivers
2020-06-28rockchip: correctly set vop0 or vop1Patrick Wildt
The EDP_LCDC_SEL bit has to be set correctly to select vop0 or vop1, but so far we have set it in both conditions, which is not correct. Can someone verify this is the correct way round? vop1 -> set, vop0 -> clear? Signed-off-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-28video: orisetech_otm8009a: fill characteristics of DSI data linkYannick Fertre
Fill characteristics of DSI data link to platform data instead of mipi device to avoid memory corruption. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-06-28video: raydium_rm68200: fill characteristics of DSI data linkYannick Fertre
Fill characteristics of DSI data link to platform data instead of mipi device to avoid memory corruption. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-06-28video: stm32: stm32_dsi: copy DSI fieldsYannick Fertre
Copy the DSI data link characteristics from panel platform data to mipi DSI device. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-06-28video: check hardware version of DSIYannick Fertre
Check the hardware version of DSI. Versions 1.30 & 1.31 are only supported. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
2020-06-28video: vidconsole: avoid multiple lines overwrite logoYe Li
Fix the bug that multiple lines wraps to overwrite logo bmp display. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # bpi-m1+, bpi-m64
2020-06-28video: bmp: support 8bits BMP drawing on 24/32 bpp framebufferYe Li
Update video bmp code so that we can display 8 bits logo on 24 or 32 bpp framebuffer. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # bpi-m1+, bpi-m64
2020-06-27rockchip: clk: rk3188: change APLL to safe 600MHzAlexander Kochetkov
The commit 84a6a27ae3ff ("rockchip: rk3188: init CPU freq in clock driver") changed ARM clock from 600MHz to 1600MHz. It made boot unstable due to the fact that PMIC at the start generates insufficient voltage for operation. See also: commit f4f57c58b589 ("rockchip: rk3188: Setup the armclk in spl"). Fixes commit 84a6a27ae3ff ("rockchip: rk3188: init CPU freq in clock driver"). Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-26Convert CONFIG_ATMEL_HLCD to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ATMEL_HLCD Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_AT91_GPIO to KconfigTom Rini
This converts the following to Kconfig: CONFIG_AT91_GPIO Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_ARM_PL180_MMCI to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ARM_PL180_MMCI Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_AM335X_LCD to KconfigTom Rini
This converts the following to Kconfig: CONFIG_AM335X_LCD Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-25bdinfo: dm: Update fb_base when using driver modelSimon Glass
Update this value with the address of a video device so that it shows with the 'bd' command. It would be better to obtain the address from the uclass by looking in struct video_uc_platdata for each device. We can move over to that once DM_VIDEO migration is complete. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25Merge tag 'xilinx-for-v2020.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.10 Versal: - xspi bootmode fix - Removing one clock from clk driver - Align u-boot memory setting with OS by default - Map TCM and OCM by default ZynqMP: - Minor DT improvements - Reduce console buffer for mini configurations - Add fix for AMS - Add support for XDP platform Zynq: - Support for AES engine - Enable bigger memory test by default - Extend documentation for SD preparation - Use different freq for Topic miami board mmc: - minor GD pointer removal net: - Support fixed-link cases by zynq gem - Fix phy looking loop in axi enet driver spi: - Cleanup global macros for xilinx spi drivers firmware: - Add support for pmufw reloading fpga: - Improve error status reporting common: - Remove 4kB addition space for FDT allocation
2020-06-24Merge tag 'mmc-2020-6-24' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
- Fix fsl_esdhc_imx tunning mask - Disable CMD CRC for normal tuning for fsl_esdhc_imx - Retry CM1 until emmc ready - Fix sdhci HISPD handling - Cache-aligned extcsd reading
2020-06-24net: xilinx: axi_emac: Fix endless loop when no PHYs are connectedPatrick van Gelder
The index used to iterate over the possible PHYs in axiemac_phy_init was an unsigned int and decremented. Therefor it was always >= 0 and never exited the loop. Signed-off-by: Patrick van Gelder <patrick.vangelder@nl.bosch.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24arm64: xilinx: Print fpga error value in hexT Karthik Reddy
Fpga returns error value when fails, error status should be printed in hex format. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24spi: zynq_[q]spi: Convert config's to macro'sAshok Reddy Soma
Remove below config options and convert them to macros. They have never been configured to different values than default one. And also it makes sense to reduce the config_whitelist. CONFIG_SYS_ZYNQ_SPI_WAIT CONFIG_SYS_ZYNQ_QSPI_WAIT CONFIG_XILINX_SPI_IDLE_VAL Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24net: gem: Disable PCS autonegotiation in case of fixed-linkMichal Simek
Disable PCS autonegotiation if fixed-link node is present in device tree. This way systems with multiple GEM instances with a combination of SGMII-fixed and SGMII-PHY will work. Reported-by: Goran Marinkovic <goran.marinkovic@psi.ch> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24fpga: zynqpl: Flush dcache only for non-bitstream dataT Karthik Reddy
In case of aes decryption destination address range must be flushed before transferring decrypted data to destination. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24fpga: zynqpl: Check if aes engine is enabledIbai Erkiaga
AES engine cannot be used if has not been enabled at boot time with an encrypted boot image. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24fpga: zynqpl: Check fpga config completionT Karthik Reddy
This patch checks fpga config completion when a bitstream is loaded into PL. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24fpga: zynqpl: Correct PL bitstream loading sequence for zynqaesSiva Durga Prasad Paladugu
Correct the PL bitstream loading sequence for zynqaes command by clearing the loaded PL bitstream before loading the new encrypted bitstream using the zynq aes command. This was done by setting the PROG_B same as in case of fpgaload commands. This patch fixes the issue of loading the encrypted PL bitstream onto the PL in which a bitstream has already been loaded successfully. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24firmware: zynqmp: Change panic logic in zynqmp_pmufw_load_config_object()Michal Simek
There is no need to panic all the time when pmufw config object loading failed. The patch improves function logic to report permission deny case and also panic only for SPL case. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2020-06-24clk: versal: Remove alt_ref_clk from clock sourcesRajan Vaja
alt_ref_clk is applicable only for PS extended version. For PS base version there is no separate alt_ref_clk. It is tied with ref_clk, so remove it from driver. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24mmc: zynq_sdhci: Remove global pointerMichal Simek
Driver is not calling gd anywhere that's why there is not need to define it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2025-01-10 11:26:23 +0000