summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-06-12pinctrl: meson: g12a: add DS bank valueGuillaume La Roque
add drive-strength bank regiter and bit value for G12A SoC Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-06-12pinctrl: meson: add support of drive-strength-microampGuillaume La Roque
drive-strength-microamp is a new feature needed for G12A SoC. the default DS setting after boot is usually 500uA and it is not enough for many functions. We need to be able to set the drive strength to reliably enable things like MMC, I2C, etc ... Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-06-12pinctrl: meson-axg: add support for getting pinmux statusNeil Armstrong
In order to support the "pinmux status" command, use the common functions to get the pins count and names, and add the AXG specific function to get the current function from registers. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-06-12pinctrl: meson-gx: add support for getting pinmux statusNeil Armstrong
In order to support the "pinmux status" command, use the common functions to get the pins count and names, and add the GX specific function to get the current function from registers. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Maxime Jourdan <mjourdan@baylibre.com>
2019-06-12pinctrl: meson: add common function to get pins nameNeil Armstrong
In order to support the "pinmux status" command, add common function to get pins count and pin name. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-06-12pinctrl: meson-gx: fix GPIO_TEST_N and GPIOCLK_ groupsNeil Armstrong
The GPIO_TEST_N was in the wrong pmx group table, move it back with the AO groups, GPIODV_18 was missing, add it back, and finally the GPIOCLK_* group names were missing. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-06-10Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
- mpc8xxx spi driver fixes (Mario) - mpc8xxx spi dm conversion (Mario, Jagan) - SPI DM Migration update (Jagan)
2019-06-10spi: mpc8xxx: Convert to DMJagan Teki
Support DM in the MPC8xxx SPI driver, and remove the legacy SPI interface. Signed-off-by: Mario Six <mario.six@gdsys.cc> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10spi: mpc8xxx: Use get_timerMario Six
The comment before the transmission loop in conjunction with the definition of SPI_TIMEOUT as 1000 implies that the loop is supposed to have a timeout value of 1000 ms. But since there is no mdelay(1) or similar in the loop body, the loop just runs 1000 times, without regard for the time elapsed. To correct this, use the standard get_timer functionality to properly time out the loop after 1000 ms. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10spi: mpc8xxx: Fix if checkMario Six
Decreasing the bit length and increasing the write data pointer should be done when there are more than 32 bit of data, not 16 bit. This did not produce incorrect behavior, because the only time where the two checks produce different outcomes is the case of 16 < bitlen < 32, and in this case the subsequent transmission is the last one regardless, hence the additional bit length decrease and write data pointer increase has no effect anyway. Still, the correct check is the check for "bitlen > 32", so correct this behavior. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10spi: mpc8xxx: Re-order transfer setupMario Six
Minize the time the adapter is disabled (via SPI_MODE_EN clearing/setting) to just the character length setting, and only set up the temporary data writing variable right before we need it, so there is a more clear distinction between setting up the SPI adapter, and setting up the data to be written. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10spi: mpc8xxx: Document LEN setting betterMario Six
Instead of having a table right before the code implementing the length setting for documentation, have inline comments for the if branches actually implementing the length setting described table's entries (which is readable thanks to the set_char_len function). Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10spi: mpc8xxx: Rename variableMario Six
The variable "char_size" holds the number of bits to be transferred in the current loop iteration. A better name would be "xfer_bitlen", which we rename this variable to. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10spi: mpc8xxx: Make code more readableMario Six
Introduce the to_prescale_mod and set_char_len inline functions to make the code more readable. Note that the added "if (bitlen > 16)" check does not change the semantics of the current code, and hence only preserves the current error (this will be fixed in a later patch in the series). Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10spi: mpc8xxx: Reduce scope of loop variablesMario Six
The transmission loop starts with setting some variables, which are only used inside the loop. Reduce the scope to the loop to make the declaration and initialization of these variables coincide. In the case of char_size this also always initializes the variable immediately with the final value actually used in the loop (instead of the placeholder value 32). Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10spi: mpc8xxx: Simplify logic a bitMario Six
We do nothing in the loop if the "not empty" event was not detected. To simplify the logic, check if this is the case, and skip the execution of the loop early to reduce the nesting level and flag checking. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10spi: mpc8xxx: Get rid of is_readMario Six
Get rid of the is_read variable, and just keep the state of the "not empty" and "not full" events in two boolean variables within the loop body. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10spi: mpc8xxx: Simplify ifMario Six
Instead of having a nested if block, just have two branches within the overarching if block to eliminate one nesting level. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10spi: mpc8xxx: Use IO accessorsMario Six
Accesses to the register map are currently done by directly reading and writing the structure. Switch to the appropriate IO accessors instead. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10spi: mpc8xxx: Replace defines with enumsMario Six
Replace pre-processor defines with proper enums, and use the BIT macro where applicable. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10spi: mpc8xxx: Fix function names in stringsMario Six
Replace the function name with a "%s" format string and the __func__ variable in debug statements (as proposed by checkpatch). Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10spi: mpc8xxx: Fix space after castMario Six
Fix all "superfluous space after case" style errors. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10spi: mpc8xxx: Rename camel-case variablesMario Six
There are three variables that have camel-case names, which is not the preferred naming style. Give those variables more compliant names instead. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10spi: mpc8xxx: Fix commentsMario Six
There are some comments on the same line as the code they document. Put comments above the code lines they document, so the line length is not unnecessarily increased. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10spi: mpc8xxx: Use short type namesMario Six
The function signatures in the driver are quite long as is. Use short type names (uint etc.) to make them more readable. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-05video: meson: hdmi-supply regulator should be optionalMaxime Jourdan
Some boards don't have such a regulator, and don't need one to enable HDMI display. Make it optional, fixing hdmi display for those boards. Also surround the regulator code with a config check on DM_REGULATOR. Reported-by: Mohammad Rasim <mohammad.rasim96@gmail.com> Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
2019-06-04video: mxsfb: add DM_VIDEO supportIgor Opaniuk
Extend the driver to build with DM_VIDEO enabled. DTS files must additionally include 'u-boot,dm-pre-reloc' property in soc and child nodes to enable driver binding to mxsfb device. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-06-04video: mxsfb: refactor video_hw_init()Igor Opaniuk
Refactor video_hw_init() function, and introduce an independent function for the common procedure of initialization. Currently video_hw_init() is only in charge of parsing configuration from env("videomode") and filling struct GraphicPanel, and new mxs_probe_common() does hw specific initialization (invocation of mxs_lcd_init() etc.) Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-06-04video: mxsfb: reorder includesIgor Opaniuk
Follow alphabetical order of includes, which simplifies detecting duplicate includes etc. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-06-04video: mxsfb: change mxs_lcd_init signatureIgor Opaniuk
Provide directly framebuffer address instead of pointer to GraphicDevice struct, which will let to re-use this function in DM_VIDEO configurations. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-06-02Merge tag 'efi-2019-07-rc4' of git://git.denx.de/u-boot-efiTom Rini
Pull request for UEFI sub-system for v2019.07-rc4 Corrections for boottime services for protocols and for the SetTime() service are provided. Error messages for the 'setenv -e' and 'bootefi bootmgr' commands are added.
2019-06-01dm: net: macb: Implement link speed change callbackBin Meng
At present the link speed change callback is a nop. According to macb device tree bindings, an optional "tx_clk" is used to clock the ethernet controller's TX_CLK under different link speed. In 10/100 MII mode, transmit logic must be clocked from a free running clock generated by the external PHY. In gigabit GMII mode, the controller, not the external PHY, must generate the 125 MHz transmit clock towards the PHY. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Tested-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-06-01dm: net: macb: Update macb_linkspd_cb() signatureBin Meng
This updates DM version macb_linkspd_cb() signature for future expansion, eg: adding an implementation for link speed changes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-06-01clk: sifive: Add clock driver for GEMGXL MGMTBin Meng
This adds a clock driver to support the GEMGXL management IP block found in FU540 SoCs to control GEM TX clock operation mode for 10/100/1000 Mbps. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Tested-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-05-31rtc: export rtc_month_days()Heinrich Schuchardt
Export function rtc_month_days() for reuse in the UEFI subsystem. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-31Merge tag 'rockchip-for-v2019.07-rc3' of git://git.denx.de/u-boot-rockchipTom Rini
- some fix for rk3399-puma; - rockchip script make_fit_atf.py cleanup - Enable TPL for rk3399 orangepi and nanopi4; - add support for rk3399 boards: Nanopi NEO4, Rockpro64, Rock PI 4;
2019-05-31clk: meson-g12a: Add PCIE PLL supportNeil Armstrong
The G12A PCIE PLL clock was introduced in Linux 5.2-rc1, and is needed for USB to operate, add basic support for it and associated gates. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-05-30rockchip: clk: rk3399: allow requests for all UART clocksChristoph Muellner
This patch adds the rate for UART1 and UART3 the same way as already implemented for UART0 and UART2. This is required for boards, which have their console output on these UARTs. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-29Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
- Audio support
2019-05-28dm: arm: bcmstb: Enable driver model MMC supportThomas Fitzsimmons
For bcm7445 and bcm7260, this patch enables CONFIG_DM_MMC and updates the bcmstb SDHCI driver to use the new driver model. This allows removal of SDHCI configuration handling from bcmstb.c, and eliminates a board removal compile warning. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Reviewed-by: Stefan Roese <sr@denx.de>
2019-05-26Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Gen3 PCIe driver + enablement on Salvator-X platforms. - Gen3 recovery SPL used to reload ATF/OpTee/U-Boot instead of minimon. - SDHI HS400 fixes ported from latest BSP and datasheet.
2019-05-26Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- SoCFPGA PL310 cleanup + A10 fix, A10 DT cleanup, DW GPIO fix.
2019-05-26configs: Migrate CONFIG_FMAN_ENET and some related options to KconfigTom Rini
Move the main symbol for Freescale Fman Ethernet controller option to Kconfig. Also migrate the CONFIG_SYS_QE_FMAN_FW_IN_xxx macros and rename the SPIFLASH one to follow the same format as all of the others. To do this fully we need to migrate CONFIG_QC, do so. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-24sound: tegra: Add a sound driverSimon Glass
Add a sound driver for tegra devices. This connects the audio hub, I2S controller and audio codec to allow sound output. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-05-24tegra: sound: Add an I2S driverSimon Glass
Add a driver which supports transmitting digital sound to an audio codec. This uses fixed parameters as a device-tree binding is not currently defined. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-05-24tegra: sound: Add an audio hub driverSimon Glass
Add a driver for the audio hub. This is modelled as a misc device which supports writing audio data from I2S. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-05-24Merge tag 'u-boot-stm32-20190523' of https://github.com/pchotard/u-bootTom Rini
- Add various STM32MP1 fixes for serial, env, clk, board, i2c ... - Add STM32MP1 DDR driver update: These update introduce the DDR interactive mode described in: https://wiki.st.com/stm32mpu/index.php/U-Boot_SPL:_DDR_interactive_mode This mode is used by the CubeMX: DDR tuning tool. https://wiki.st.com/stm32mpu/index.php/STM32CubeMX The DDR interactive mode is NOT activated by default because it increase the SPL size and slow down the boot time (200ms wait added).
2019-05-24Merge git://git.denx.de/u-boot-mpc85xxTom Rini
- Enable DM for SATA, SDHC, USB in T2080QDS
2019-05-24drivers: serial: mcfuart: add DT supportAngelo Dureghello
This patch adds devicetree support to the mcfuart.c driver and removes non DM code. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2019-05-24drivers: spi: cf_spi: convert to driver modelAngelo Dureghello
Converting to driver model and removes non-dm code. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
generated by cgit (git 2.34.1) at 2024-12-30 20:05:33 +0000