summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-09-30usb:ci_udc: Introduce init_after_reset phy functionRamon Fried
MSM variant of Chipidea must reinitalize the phy after controller reset. Introduce ci_init_after_reset() weak function that can be used to achieve the above init. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30ehci: msm: use init_type in probeRamon Fried
Change ehci_usb_probe() function to initialize the USB according to the init_type provided. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30ehci: msm: switch to generic PHY uclassRamon Fried
All the underlying USB PHY was handled in the ehci driver. Use the generic phy API instead. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30phy: db410c: Add MSM USB PHY driverRamon Fried
Add a PHY driver for the Qualcomm dragonboard 410c which allows switching on/off and resetting the phy connected to the EHCI controllers and USBHS controller. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30ehci: msm: Add missing platdataRamon Fried
platdata_auto_alloc_size was not initialized in structure. Caused null pointer dereference when configuring device as gadget. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30ehci: Replace board_prepare_usb with board_usb_initRamon Fried
Use standard board_usb_init() instead of the specific board_prepare_usb. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30serial: serial_stm32: Enable uart FIFO for STM32F7xx SoCsPatrice Chotard
Since commit 7b3b74d32127 ("serial: serial_stm32: Enable overrun") on STM32F7xx based boards, the first lines of serial output are missing during boot (we no more see the U-Boot release version, board model and DRAM size). By enabling the uart FIFO on STM32F7, the complete U-boot log can be sent correctly. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-09-30clk: Add support for Arm's Versatile Express OSC clock generatorsLiviu Dudau
The Arm Versatile Express and Juno development boards contain an OSC clock generator that can be accessed through the Versatile Express config bus. The generators are quite often being controlled by some MCU and the config bus offers a uniform way of exposing them. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-09-29Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-29dm: test: Add "/firmware" node scan testRajan Vaja
Add a test which verifies that all subnodes under "/firmware" nodes are scanned. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Added 'imply FIRMWARE' to sandbox Kconfig to fix test failures, fixed ordering of lines in arch/sandbox/dts/test.dts and test/dm/Makefile, updated #if condition in drivers/firmware/firmware-uclass.c: Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-29firmware: Add FIRMWARE config prompt stringRajan Vaja
There is no prompt string for FIRMWARE config. Without this, FIRMWARE config cannot be enabled through menuconfing or config file. Fix this by adding prompt summary. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-29test: Add tests for board uclassMario Six
Add tests for the new board uclass. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-29board: Add gazerbeam driverMario Six
Add a board driver for the upcoming gdsys Gazerbeam board. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-29drivers: Add board uclassMario Six
Since there is no canonical "board device" that can be used in board files, it is difficult to use DM function for board initialization in these cases. Hence, add a uclass that implements a simple "board device", which can hold devices not suitable anywhere else in the device tree, and is also able to read encoded information, e.g. hard-wired GPIOs on a GPIO expander, read-only memory ICs, etc. that carry information about the hardware. The devices of this uclass expose methods to read generic data types (integers, strings, booleans) to encode the information provided by the hardware. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-29core: Add dev_{disable,enable}_by_pathMario Six
We cannot use device structures to disable devices, since getting them with the API functions would bind and activate the device, which would fail if the underlying device does not exist. Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-29core: Add functions to set properties in live-treeMario Six
Implement a set of functions to manipulate properties in a live device tree: * ofnode_write_prop() to set generic properties of a node * ofnode_write_string() to set string properties of a node * ofnode_set_enabled() to either enable or disable a node Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-29Merge tag 'fsl-qoriq-for-v2018.11-rc1' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
Switch to driver model for eSDHC on Layerscape SoCs including LS1021A, LS1043A, LS1046A, LS1088A, LS2088A. Switch to driver model for SATA on LS1021A and LS1043A. Add support for LS1012AFRWY rev C board. Enable SMMU for LS1043A.
2018-09-29mmc: omap_mmc: Remove invert referencesAdam Ford
With DM_GPIO and DM_MMC translating GPIO_ACTIVE_LOW, any boards using the 'cd-invert' option will no longer need to do this. This patch removes the support for 'invert' from the MMC driver. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Fix warning over when !DM_GPIO] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-28pinctrl: sandbox: add gpio onewire w1 groupEugen Hristev
Add onewire "w1" groups and pin function for onewire GPIOs in sandbox. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28W1-EEPROM: add sandbox driverEugen Hristev
Add a sandbox driver for a one wire EEPROM memory Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28W1-EEPROM: add support for Maxim DS24 eeprom familiesMaxime Ripard
Add a driver that supports Maxim 1 wire EEPROMs families DS24B33 and DS2431. Can be extended for other families as well. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [eugen.hristev@microchip.com: reworked driver] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28w1: identify devices with w1-eeprom uclassEugen Hristev
When a new device is discovered, this may be a w1 eeprom device. Attempt to find the proper node and driver from the w1-eeprom subsystem. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28W1-EEPROM: Add an W1-EEPROM uclass for 1 wire EEPROMsMaxime Ripard
We might want to access data stored onto one wire EEPROMs. Create a framework to provide a consistent API. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [eugen.hristev@microchip.com: reworked patch] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28w1: Add 1-Wire gpio driverMaxime Ripard
Add a bus driver for bitbanging a 1-Wire bus over a GPIO. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [eugen.hristev@microchip.com: fixed some issues] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28w1: Add 1-Wire uclassMaxime Ripard
We might want to use 1-Wire devices connected on boards such as EEPROMs in U-Boot. Provide a framework to be able to do that. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [eugen.hristev@microchip.com: reworked] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28common: Generic loader for file systemTien Fong Chee
This is file system generic loader which can be used to load the file image from the storage into target such as memory. The consumer driver would then use this loader to program whatever, ie. the FPGA device. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2018-09-28block: Add a function to find block device descriptorTien Fong Chee
Add a function to find the block device descriptor of the parent device. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> [trini: Move function declaration to avoid warning] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-28video: Add support for Arm's Mali Display ProcessorsLiviu Dudau
Add support for Arm Mali Display Processors DP500, DP550 and DP650. Only one layer is being used to display the console or boot logo, even if more layers are supported in the hardware. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-09-28video: Add support for NXP's TDA19988 HDMI encoderLiviu Dudau
Add support for the NXP TDA19988 HDMI encoder as used on the Juno development board from Arm. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-09-28video: cfb_console: flush cache in display_rle8_bitmapSébastien Szymanski
Otherwise BMP RLE8 images are not properly displayed. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2018-09-28video_osd: Add osd sandbox driver and testsMario Six
Add sandbox driver and tests for the new OSD uclass. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-28video_osd: Add ihs_video_out driverMario Six
Add a driver for IHS OSDs on IHS FPGAs. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-28drivers: Add OSD uclassMario Six
Some devices offer a text-based OSD (on-screen display) that can be programmatically controlled (i.e. text displayed on). Add a uclass to support such devices. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-28dm: video: support more escape sequencesHeinrich Schuchardt
The EFI subsystems needs to know the size of the terminal. If the environment variable stdout = serial,vidconsole this size cannot be read from the video console. So the EFI subsystem sends escape sequences to read the size. With this patch we get support for the following escape sequences: ESC "7" Save cursor position ESC "8" Restore cursor position Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-09-27drivers: qe: Move CONFIG_U_QE to KconfigRan Wang
Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [York S: revised subject line and removed commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27net: fman: Support both new and legacy FMan CompatiblesZhao Qiang
Recently the FMan Port and MAC compatibles were changed. This patch aligns the FMan Port and MAC compatibles to the new FMan device tree binding document. The FMan device tree binding document can be found in the Linux kernel version 3.18.0, commit 297d35fd2a7d3fbd4e5c0f0c1c18213117ba11ba ./Documentation/devicetree/bindings/powerpc/fsl/fman.txt This patch doesn't affect legacy compatibles support. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> [York S: reformatted commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27ls1012a: remove debug info from u-boot logPramod Kumar
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27armv8: ls1043a: enable icid setup for qman portalsLaurentiu Tudor
Enable support for ICID setup of qman portals and the required device tree fixups. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27driver: net: fsl-mc: Memset MC reserve ram memory before usagePrabhakar Kushwaha
Memory reserved for Management Complex needs to be cleaned before any usage. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> [York S: revised commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27u-boot: fixup the iommu-map property of fsl-mc nodeNipun Gupta
The iommu-map property in the fsl-mc node is updated by valid stream-ids by u-boot. This patch is to fixup this property for LS208x and LS1088. Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27scsi: ceva: add ls1021a soc support.Peng Ma
Add ahci compatible support for ls1021a soc. Signed-off-by: Peng Ma <peng.ma@nxp.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27scsi: ceva: add ls1043a soc supportPeng Ma
Add ahci compatible support for ls1043a soc. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27ppa/fm/qe: use block layer in ppa/fm/qe driverYinbo Zhu
At present the MMC subsystem maintains its own list of MMC devices. This cannot work with driver model when CONFIG_BLK is enabled, use blk_dread to replace previous mmc read interface, use mmc_get_blk_desc to get the mmc device property. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> [York S: reformatted commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27Merge tag 'xilinx-for-v2018.11' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx changes for v2018.11 - Handle BOARD_LATE_INIT via Kconfig SPL: - Enable GZIP for all partitions types(not only for kernel) ZynqMP: - Rearrange pmufw version handling - Support newer PMUFW with improved fpga load sequence Zynq: - Cleanup config file - Simplify zybo config by enabling option via Kconfig net: - Fix gems max-speed property reading - Enable support for fixed-link phys
2018-09-27net: zynq_gem: Add support for fixed-link phyMichal Simek
Based on dt-specs fixed-link doesn't require phy-handle to be used. Fix driver to only read phy related setting when phy-handle is found. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-09-26Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2018-09-26 A lot of goodness in this release. We're *very* close to running the UEFI Shell and SCT natively. The only missing piece are HII protocols. - FAT write support (needed for SCT) - improved FAT directory support (needed for SCT) - RTC support with QEMU -M virt - Sandbox support (run UEFI binaries in Linux - yay) - Proper UTF-16 support - EFI_UNICODE_COLLATION_PROTOCOL support (for UEFI Shell) - EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL support (for UEFI Shell) - Fix window size determination - Fix Tegra by explicitly unmapping RAM - Clean up handle entanglement - Lots of generic code cleanup [trini: Fixup merge conflict in include/configs/qemu-arm.h] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-26net: zynq_gem: Fix reading of max-speed propertySiva Durga Prasad Paladugu
max-speed property is part of phynode and it has to be read using ofnode_read_u32_default(). This fixes the issue of incorrect max-speed read from DT. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-26fpga: zynqmp: Modify PL bitstream loading sequenceSiva Durga Prasad Paladugu
This patch modifies PL bitstream loading sequence as per latest Xilfpga which supports all variants of bitstream images generated from vivado and from bootgen. With this new change in Xilfpga, uboot doesn't need to validate and swap bitstream as it will be taken care inside Xilfpga. ZynqMP PL driver now checks for supporting PMUFW version before skipping the validation and swap sequence as there can be old PMUFW which doesn't supports this feature. In this case, driver uses old way of PL bitstream loading sequence. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-25serial: omap: Add support for AM654 uart controllerLokesh Vutla
AM654 uses a UART controller that is compatible (partially) with existing OMAP UART, Introduce a compatible for adding support for this controller. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-09-25ata: ahci: Don't cap AHCI port count under CONFIG_DM_SCSITuomas Tynkkynen
When using device model this sort of hardcoded limits aren't used or necessary. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-28 09:33:45 +0000