summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-04-11serial: Fix Makefile during SPL and TPL buildMarek Vasut
This patch fixes a situation where CONFIG_DM_SERIAL is enabled for regular U-Boot and SPL, but not for TPL. In that case, the build will try to include serial-uclass into the TPL nonetheless, because CONFIG_DM_SERIAL is set. The solution is to check if the build is for SPL or TPL and in that case, check if CONFIG_$(SPL_TPL_)DM_SERIAL is also set. Only in that case, include serial-uclass.c . If the build is for regular U-Boot, CONFIG_BUILD is not set, so only check if CONFIG_DM_SERIAL is set and if so, include serial-uclass.c Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2018-04-10clk: add sandbox test for bulk APINeil Armstrong
This patch adds the bulk clock API tests for the sandbox test suite. It's very similar to the main test but only uses the _bulk() API and checks if the clocks are correctly enabled/disabled. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-10clk: Add get/enable/disable/release for a bulk of clocksNeil Armstrong
This patch adds a "bulk" API to the clock API in order to get/enable/disable /release a group of clocks associated with a device. This bulk API will avoid adding a copy of the same code to manage a group of clocks in drivers. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-10reset: add sandbox test for bulk APINeil Armstrong
This patch adds the bulk reset API tests for the sandbox test suite. Unlike the main test, it also check the "other" reset signal using the bulk API and checks if the resets are correctly asserted/deasserted. To allow the bulk API to work, and avoid changing the DT, the number of resets of the sandbox reset controller has been bumped to 101 for the "other" reset line to be valid. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-10reset: Add get/assert/deassert/release for bulk of reset signalsNeil Armstrong
This patch adds a "bulk" API to the reset API in order to get/deassert/ assert/release a group of reset signals associated with a device. This bulk API will avoid adding a copy of the same code to manage a group of reset signals in drivers. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-10serial: meson: Update compatible with new Linux bindingsNeil Armstrong
The Amlogic Meson SoCs serial bindings were not written when serial support was pushed into Linux and U-Boot. A clean bindings document has been merged into Linux tree to correctly handle the multiple clocks feeding the serial peripheral. This update the U-Boot serial_meson driver with the new compatible string for Amlogic Meson GX Socs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-10reset: Add Amlogic Meson Reset ControllerNeil Armstrong
The Amlogic Meson SoCs embeds up to 256 reset lines, add the corresponding driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-10sysreset: syscon: convert to use live dtÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-04-09Merge tag 'xilinx-for-v2018.05-rc2' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx changes for v2018.05-rc2 - Various DT changes and sync with mainline kernel - Various defconfig updates - Add SPL init for zcu102 revA - Add new zynqmp boards zcu100/zcu104/zcu106/zcu111/zc12XX and zc1751-dc3 - Net fixes - xlnx,phy-type - 64bit axi ethernet support - arasan: Fix nand write issue - fpga fixes - Maintainer file updates
2018-04-09net: phy: xilinx_phy: Read phytype using property xlnx,phy-typeSiva Durga Prasad Paladugu
This patch reads phytype from property "xlnx,phy-type" instead od simply looking for "phy-type". This is to be inline with Linux and also fixes the issue of detecting it wrongly in u-boot. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-09axi: ethernet: Added support for 64 bit addressing for axi-ethernetVipul Kumar
This patch uses writeq() function to enable greater than 32 bit addressing of axi-ethernet for the ZynqMP devices. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-09nand: arasan_nfc: Fixed NAND write issueVipul Kumar
In commit 2453c695185f ("arm64: zynqmp: nand: Fixed NAND erase issue for size 1GiB or more"), ARASAN_NAND_MEM_ADDR1_PAGE_MASK macro changed to 0xFFFF and the same macro is used in nand write and so that getting nand write error. This patch reverted this macro to the 0xFFFF0000 and used ARASAN_NAND_MEM_ADDR1_COL_MASK in the nand erase function which is equal to 0xFFFF. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09fpga: zynq: Add delay after PCFG_PROG_B changeSiva Durga Prasad Paladugu
There is delay needed after PCFG_PROGB change if AES key source is efuse. This fixes the issue of encrypted bitstream loading with AES efuse as key source. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09fpga: zynqmp: Fix the nonsecure bitstream loading issueSiva Durga Prasad Paladugu
Xilfpga library expects the size of bitstream in a pointer but currenly we are passing the size as a value. This patch fixes this issue. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Nava kishore Manne <navam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09fpga: zynqmp: Update zynqmp_load() as per latest xilfpgaSiva Durga Prasad Paladugu
Latest xilfpga expects to set BIT5 of flags for nonsecure bitsream and also expects length in bytes instead of words This patch does the same. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-09fpga: zynqmp: Add support to get the PCAP status for fpga info commandNitin Jain
This patch adds support for ZynqMP platform to print FPGA PCAP status for "fpga status" command. Signed-off-by: Nitin Jain <nitinj@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09clk: zynqmp: Add new compatible string for clock driverMichal Simek
New and old clk drivers are sharing IDs and descriptions. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-08net: Move enetaddr env access code to env config instead of net configAlex Kiernan
In order that we can use eth_env_* even when CONFIG_NET isn't set, move these functions to environment code from net code. This fixes failures such as: board/ti/am335x/built-in.o: In function `board_late_init': board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr' u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr' which caters for use cases such as: commit f411b5cca48f ("board: am335x: Always set eth/eth1addr environment variable") when Ethernet is required in Linux, but not U-Boot. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-08usb: gadget: USB_ETHER requires network supportAlex Kiernan
In order to compile the USB Ethernet gadget support we require that NET is enabled, add that dependency here. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-08Migrate CONFIG_DRIVER_TI_CPSW to KconfigAlex Kiernan
This converts CONFIG_DRIVER_TI_CPSW to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-08treewide: Migrate CONFIG_FSL_ESDHC to KconfigMario Six
Migrate the CONFIG_FSL_ESDHC option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-04-08treewide: Migrate CONFIG_TSEC_ENET to KconfigMario Six
Migrate the CONFIG_TSEC_ENET option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-04-07Revert "spi: atmel: Drop non-dm code"Tom Rini
As we aren't quite able to convert some platforms with a very small size limit in SPL yet, we need to revert this for now. This reverts commit 7b0947787358c6b277431d6b76ce043d8bec641d. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-07Revert "spi: atmel: Drop atmel_spi.h"Tom Rini
As we aren't quite able to convert some platforms with a very small size limit in SPL yet, we need to revert this for now. This reverts commit 37434db29be495ef41f204a97b8bf13b1418f97d. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-06gpio: uclass: Fix debug stringMario Six
A debug string still has the old name of a function being called; update it. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-06watchdog: Fix Kconfig alignment for WDT_SANDBOXMichal Simek
Fix Kconfig alignment which should be <tab><space><space>. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-06rtc: rx8025: remove redundant code in rtc_resetChris Packham
As of commit 1a1fa2406689 ("rtc: Set valid date after reset") the command "date reset" will set the date/time to 2000-01-01 0:00:00 after calling rtc_reset(). This means that the rx8025 implementation of rtc_reset() does not need to call rtc_set(). Signed-off-by: Chris Packham <judge.packham@gmail.com>
2018-04-06rtc: rs5c372: remove redundant code in rtc_resetChris Packham
As of commit 1a1fa2406689 ("rtc: Set valid date after reset") the command "date reset" will set the date/time to 2000-01-01 0:00:00 after calling rtc_reset(). This means that the rs5c372 implementation of rtc_reset() does not need to call rtc_set(). Signed-off-by: Chris Packham <judge.packham@gmail.com>
2018-04-06rtc: mx27rtc: remove redundant code in rtc_resetChris Packham
As of commit 1a1fa2406689 ("rtc: Set valid date after reset") the command "date reset" will set the date/time to 2000-01-01 0:00:00 after calling rtc_reset(). This means that the mx27rtc implementation of rtc_reset() can be an empty stub function. Signed-off-by: Chris Packham <judge.packham@gmail.com>
2018-04-06rtc: ds1374: remove redundant code in rtc_resetChris Packham
As of commit 1a1fa2406689 ("rtc: Set valid date after reset") the command "date reset" will set the date/time to 2000-01-01 0:00:00 after calling rtc_reset(). This means that the ds1374 implementation of rtc_reset() doesn't need to call rtc_set(). Signed-off-by: Chris Packham <judge.packham@gmail.com>
2018-04-06rtc: ds1307: remove redundant code in rtc_resetChris Packham
As of commit 1a1fa2406689 ("rtc: Set valid date after reset") the command "date reset" will set the date/time to 2000-01-01 0:00:00 after calling rtc_reset(). This means that the ds1307 implementation of rtc_reset() doesn't need to call rtc_set(). Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-06clock: stm32mp1: add stgen clock source change supportPatrick Delaunay
The STGEN is the clock source for the Cortex A7 arch timer. So after modification of its frequency, CP15 cntfreq is updated and a new timer init is performed. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-04-06rtc: rewrite isl1208 to support DMKlaus Goger
Adds devicemodel support to the ISL1208 driver. This patch drops the non-dm API as no board was using it anyway. Also add it to Kconfig. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-06regulator: pbias: don't evaluate variable before assignmentHeinrich Schuchardt
We should not evaluate the value of reg before its value is set. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-06input: Drop PS/2 keyboard supportSimon Glass
This is not used by any current board and has not been converted to driver model. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-04-06drivers: serial: remove nonexisting initialisation functionsChristophe Leroy
This patch removes call of serial initialisation functions that are not implemented anymore. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06Migrate CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSCAlex Kiernan
This converts CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-06powerpc: mpc8xx: move watchdog into drivers/watchdogChristophe Leroy
In preparation of DM watchdog, move basic actions into drivers/watchdog Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06powercp: mpc8xx: move commproc.hChristophe Leroy
include/commproc.h is dedicated to the 8xx, rename it cpm_8xx.h and move it into arch/powerpc/include/asm Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06powerpc: mpc8xx: Change CONFIG_8xx to CONFIG_MPC8xxChristophe Leroy
CONFIG_8xx doesn't mean much outside of arch/powerpc/ This patch renames it CONFIG_MPC8xx just like CONFIG_MPC85xx etc ... It also renames 8xx_immap.h to immap_8xx.h to be consistent with other file names. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06soft_i2c: cleanup - no mpc8xx supportChristophe Leroy
commit 907208c452999 ("powerpc: Partialy restore core of mpc8xx") didn't bring back support for I2C on the mpc8xx Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06spi: atmel: default y if DM_SPI && ARCH_AT91Jagan Teki
ATMEL_SPI is now fully converted to driver-model and respective boards switch to DM_SPI as well, so make default y for ARCH_AT91 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Wenyou Yang <wenyouya@gmail.com>
2018-04-06spi: atmel: Drop atmel_spi.hJagan Teki
atmel_spi.h has register offsets, and atmel_spi_slave structure, move it into .c file for better readability and drop atmel_spi.h Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Wenyou Yang <wenyouya@gmail.com>
2018-04-06spi: atmel: Drop non-dm codeJagan Teki
All board configs are now enabled DM_SPI for SPL and U-Boot proper, so now its time to drop non-dm code. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Wenyou Yang <wenyouya@gmail.com>
2018-04-06spi: atmel: Add ifdef for DM_GPIO codeJagan Teki
Few boards are configuring gpio directly from board instead using drivers/gpio so add ifdef for DM_GPIO to compatible for both the cases. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Wenyou Yang <wenyouya@gmail.com>
2018-04-06Merge tag 'signed-rpi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for rpi - 2018-04-06 Highlights this time around: - Support for new RPi3 B+ model - Fix for some SD cards on newer RPi firmware
2018-04-05mmc: use core clock frequency in bcm2835 sdhostJonathan Gray
In raspberrypi-firmware 7fdcd00e00a42a1c91e8bd6f5eb8352fe9358557 and later start.elf now sets the EMMC clock to 200 MHz. According to Phil Elwell in https://github.com/raspberrypi/firmware/issues/953 the SDHost controller shares the core/VPU clock and doesn't use the EMMC clock. Use the core clock id when determining the frequency to allow U-Boot to work with recent versions of raspberrypi-firmware. Otherwise U-Boot hangs at: U-Boot 2018.03 (Mar 14 2018 - 20:36:00 +1100) DRAM: 948 MiB RPI 3 Model B (0xa02082) MMC: mmc@7e202000: 0, sdhci@7e300000: 1 Loading Environment from FAT... Signed-off-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04Merge git://git.denx.de/u-boot-sunxiTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-04sunxi: revert disabling of featuresAndre Przywara
In January some commits were introduced to mitigate the U-Boot image size issues we encountered on sunxi builds. Now with the MMC environment removed we can bring them back, as we practically don't have a size limit anymore. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-04net: sun8i-emac: remove support for old bindingAndre Przywara
The original DT binding used by U-Boot's sun8i-emac driver was not really agreed upon, and deviated from the "official" binding now used by the kernel. Since now all U-Boot users have been converted to the new binding, we can remove support for the old DT nodes from the driver. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
generated by cgit (git 2.34.1) at 2025-01-03 23:20:59 +0000