summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-06-18Merge tag 'ti-v2020.10-next' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next - DM conversion for OMAP4, OMAP5 platforms. - Other minor fixes for Nokia RX51, am33, am57, am654.
2020-06-16net: cpsw: Add __maybe_unused to generated inlinesTom Rini
We generate a number of helper inline functions to make accesses easier. However not all permutations of each function will be used and clang will warn about unused ones. Decorate all of them with __maybe_unused because of this. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2020-06-16mmc: omap_hsmmc: Add guards around omap_hsmmc_get_cfg()Tom Rini
We only call the function omap_hsmmc_get_cfg in the case of OMAP34XX or when we have to iodelay recalibration. Add guards for these checks as clang will otherwise warn. Cc: Peng Fan <peng.fan@nxp.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-06-16gpio: omap_gpio: Fix unused function warning in non-DM caseTom Rini
In the case of non-DM_GPIO the function get_gpio_index() will never be called, and clang will warn about this. Move this to be with the other non-DM code for easier removal later. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-06-16phy: omap-usb2-phy: disable phy charger detectBin Liu
AM654x PG1.0 has a silicon bug that D+ is pulled high after POR, which could cause enumeration failure with some USB hubs. Disabling the USB2_PHY Charger Detect function will put D+ into the normal state. Using property "ti,dis-chg-det-quirk" in the DT usb2-phy node to enable this workaround for AM654x PG1.0. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com>
2020-06-13mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPLFaiz Abbas
Cleanup this driver to use dt in U-boot and static platdata in SPL. This requires the following steps: 1. Move all platdata assignment from probe() to ofdata_to_platdata(). This function is only called in U-boot. 2. Replicate all the platdata assignment being done in ofdata_to_platdata() in the omapl138 board file. This data is used in the SPL case where SPL_OF_CONTROL is not enabled. 3. Remove SPL_OF_CONTROL and related configs from omapl138_lcdk_defconfig This cleanup effectively reverts 3ef94715cc ('mmc: davinci: fix mmc boot in SPL') Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-06-13Merge tag 'dm-pull-12jun20' of git://git.denx.de/u-boot-dm into nextTom Rini
patman improvements to allow it to work with Zephyr change to how sequence numbers are assigned to devices minor fixes and improvements
2020-06-12net: rtl8139: Add DM supportMarek Vasut
Add support for driver model to the driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Read HW address from EEPROM only on probeMarek Vasut
Do not re-read the HW address from the EEPROM on every start of transfer, otherwise the user will not be able to adjust ethaddr as needed. Read the address only once, when the card is detected. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Use PCI_DEVICE() to define PCI device compat listMarek Vasut
Use this macro to fully fill the PCI device ID table. This is mandatory for the DM PCI support, which checks all the fields. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Split out common and non-DM functionsMarek Vasut
Split the driver into common and non-DM functionality, so that the DM support can later re-use the common code, while we retain the non-DM code until all the platforms are converted. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Pass private data into rtl8139_eeprom_delay()Marek Vasut
Instead of always calling rtl8139_eeprom_delay() with priv->ioaddr, call it with priv and let the function access priv->ioaddr. This reduces code duplication and has no impact, since the compiler will inline this as needed anyway. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Introduce device private dataMarek Vasut
Introduce rtl8139_pdata, which is a super-structure around eth_device and tracks per-device state, here the device IO address, PCI BDF, RX and TX ring position. Pass this structure around instead of the old non-DM eth_device in preparation for DM conversion. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Clean up bus_to_phys()/phys_to_bus() macrosMarek Vasut
These macros depended on the dev variable being declared wherever they were used. This is wrong and will not work with DM anyway, so pass only the PCI BFD into these macros, which fixes the dependency and prepares them for DM support as well. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Use dev->iobase instead of custom ioaddrMarek Vasut
Replace the use of custom static ioaddr variable with common dev->iobase, no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Switch from malloc()+memset() to calloc()Marek Vasut
Replace malloc()+memset() combination with calloc(), no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Factor out device name assignmentMarek Vasut
Pull the device name setting into a separate function, as this will be shared between DM/non-DM variants. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: phy: Add DP8382x phy registration to TI PHY initDan Murphy
Add the DP8382X generic PHY registration to the TI PHY init file. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Dan Murphy <dmurphy@ti.com>
2020-06-12net: phy: Add support for TI PHY initDan Murphy
ti_phy_init function was allocated to the DP83867 PHY. This function name is to generic for a specific PHY. The function can be moved to a TI specific file that can register all TI PHYs that are defined in the defconfig. The ti_phy_init file will contain all TI PHYs initialization so that only phy_ti_init can be called from the framework. In addition to the above the config flag for the DP83867 needs to be changed in the Kconfig and dependent defconfig files. The config flag that was used for the DP83867 was also generic in nature so a more specific config flag for the DP83867 was created. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Dan Murphy <dmurphy@ti.com>
2020-06-12net: phy: add phyid search in vendor specific spaceFlorin Chiculita
There are devices accesible through mdio clause-45, such as retimers, that do not have PMA or PCS blocks. This patch adds MDIO_MMD_VEND1 on the list of device addresses where phyid is searched. Previous order of devices was kept. Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com> Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
2020-06-12net: rt8169: WAR for DHCP not getting IP after kernel boot/rebootTom Warren
This is a WAR for DHCP failure after rebooting from the L4T kernel. The r8169.c kernel driver is setting bit 19 of the rt816x HW register 0xF0, which goes by FuncEvent and MISC in various driver source/datasheets. That bit is called RxDv_Gated_En in the r8169.c kernel driver. Clear it here at the end of probe to ensure that U-Boot can get an IP assigned via DHCP. Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-06-12net: phy: micrel: ksz8061 implement errata 80000688A fixBryan O'Donoghue
Linux commit 232ba3a51cc2 ('net: phy: Micrel KSZ8061: link failure after cable connect') implements a fix for the above errata. This patch replicates that errata fix in an ksz8061 specific init routine. Signed-off-by: Bryan O'Donoghue <bod@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-06-11dm: uclass: don't assign aliased seq numbersMichael Walle
If there are aliases for an uclass, set the base for the "dynamically" allocated numbers next to the highest alias. Please note, that this might lead to holes in the sequences, depending on the device tree. For example if there is only an alias "ethernet1", the next device seq number would be 2. In particular this fixes a problem with boards which are using ethernet aliases but also might have network add-in cards like the E1000. If the board is started with the add-in card and depending on the order of the drivers, the E1000 might occupy the first ethernet device and mess up all the hardware addresses, because the devices are now shifted by one. Also adapt the test cases to the new handling and add test cases checking the holes in the seq numbers. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Alex Marginean <alexandru.marginean@nxp.com> Tested-by: Alex Marginean <alexandru.marginean@nxp.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Michal Simek <michal.simek@xilinx.com> [on zcu102-revA]
2020-06-11usb: provide a device tree node to USB devicesMichael Walle
It is possible to specify a device tree node for an USB device. This is useful if you have a static USB setup and want to use aliases which point to these nodes, like on the Raspberry Pi. The nodes are matched against their hub port number, the compatible strings are not matched for now. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-11regmap: Check for out-of-range offsets before mapping themPratyush Yadav
In regmap_raw_{read,write}_range(), offsets are checked to make sure they aren't out of range. But this check happens _after_ the address is mapped from physical memory. Input should be sanity-checked before using it. Mapping the address before validating it leaves the door open to passing an invalid address to map_physmem(). So check for out of range offsets _before_ mapping them. This fixes a segmentation fault in sandbox when -1 is used as an offset to regmap_{read,write}(). Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
2020-06-09Merge tag 'u-boot-imx-20200609' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2020.07 ----------------- - mx53: mx53menlo Convert to DM_ETH, fix fail boot - imx8mp_evk: fix boot issue - MX6, display5: fix environment - drop warnings (watchdog) for i.MX8mm i.mx8mp - enable bootaux for i.MX8M Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/695929999
2020-06-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
- DM_ETH support for P2041RDB, T1024RDB, P5040DS, P3041DS, P4080DS, bug fixes - Add TBI PHY access through MII - DDR: Rework errata workaround for A008109, A008378, 009942
2020-06-08power: pmic: Add SPL Kconfig entry for PFUZE100Marek Vasut
Add Kconfig entry for the PFUZE PMIC, SPL variant. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-06-05virtio: VIRTIO_RNG depends on DM_RNGHeinrich Schuchardt
Add the missing Kconfig dependency and let VIRTIO_RNG default to yes. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-04serial: Add missing Kconfig dependencies for debug consolesMichal Simek
Debug console is the part of serial driver in the same file. It means to be able to enable debug console you also need to enable driver itself. That's why add all dependecies and list only debug consoles which are enabled based on driver selection to avoid compilation error when user asks for certain debug console but driver is not enable for it. Error: aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc': /home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to `printch' aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `puts': /home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Fix ns16550 dependency, add ZYNQ_SERIAL, change S5P] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-04serial: Convert ARM_DCC to KconfigTom Rini
The symbol "CONFIG_ARM_DCC" is used to control building drivers/serial/arm_dcc.c. Provide a simple Kconfig entry for this. Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Tom McLeod <tom.mcleod@opalkelly.com> Cc: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2020-06-04ddr: Rework errata A008109, A008378, 009942 workaroundJaiprakash Singh
Move errata A008109, A008378, 009942 workaround implementation from compute_fsl_memctl_config_regs() to fsl_ddr_set_memctl_regs() and add register write after each workaround implementation. Signed-off-by: Jaiprakash Singh <Jaiprakash.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04ddr: fsl: Impl. Erratum A008109Joakim Tjernlund
Impl. erratum as descibed in errata doc. Enable A008109 for T1040 and T1024 Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04net: tsec: Access TBI PHY through the corresponding MIIHou Zhiqiang
When an eTSEC is configured to use TBI, configuration of the TBI is done through the MIIM registers for that eTSEC. For example, if a TBI interface is required on eTSEC2, then the MIIM registers starting at offset 0x2_5520 are used to configure it. Fixes: 9a1d6af55ecd ("net: tsec: Add driver model ethernet support") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04net: tsec: Access eTSEC registers using virtual addressHou Zhiqiang
The current code accesses eTSEC registers using physical address directly, it's not correct, though no problem on current platforms. It won't work on platforms, which does not support 1:1 virtual-physical address map. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04net: tsec: fsl_mdio: add DM MDIO supportMadalin Bucur
Allow the MDIO devices to be probed based on the device tree. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04clk: sifive: fu540-prci: Release ethernet clock resetPragnesh Patel
U-Boot ethernet works with FSBL flow where releasing ethernet clock reset is part of FSBL itself but with the SPL, We need to release ethernet clock reset explicitly for U-Boot proper. With this change Release ethernet clock reset code in FSBL might not be needed or unaffected. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-04clk: sifive: fu540-prci: Add ddr clock initializationPragnesh Patel
Release ddr clock reset once clock is initialized Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-04clk: sifive: fu540-prci: Add clock enable and disable opsPragnesh Patel
Added clock enable and disable functions in prci ops Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-04sifive: fu540: add ddr driverPragnesh Patel
Add driver for fu540 to support ddr initialization in SPL. This driver is based on FSBL (https://github.com/sifive/freedom-u540-c000-bootloader.git) Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-04misc: add driver for the SiFive otp controllerPragnesh Patel
Added a misc driver to handle OTP memory in SiFive SoCs. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-03Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spiTom Rini
- Toshiba spinand (Yoshio) - SPI/SPI Flash cleanup (Jagan) - Remove SH SPI (Jagan)
2020-06-03Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- H6 emac support - USB PHY H6 logic alignment
2020-06-03drivers: net: qe: deselect QE when DM_ETH is enabledMadalin Bucur
A compilation error appears when QE is compiled with DM_ETH enabled: drivers/qe/uec.c: In function 'init_phy': drivers/qe/uec.c:425:28: error: dereferencing pointer to incomplete type 'struct eth_device' uec = (uec_private_t *)dev->priv; ^~ drivers/qe/uec.c: In function 'uec_initialize': drivers/qe/uec.c:1357:43: error: invalid application of 'sizeof' to incomplete type 'struct eth_device' dev = (struct eth_device *)malloc(sizeof(struct eth_device)); ^~~~~~ The patch disables CONFIG_QE when CONFIG_DM_ETH is set. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-03drivers: net: e1000: with DM_ETH needs DM_PCI tooMadalin Bucur
Compilation error occur when DM_ETH is enabled without DM_PCI. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-02bootcount_ext: Add Ext4 build dependencyFrédéric Danis
This config option depends on EXT4 support. If Ext4 write capability is not selected, it generate write error messages and is unable to maintain boot counter. Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
2020-06-02kconfig: fix typo for OHCI host and add to DM listMarcin Juszkiewicz
Description said that OHCI is not supported for driver model while it was converted too. Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
2020-06-02kconfig: mark SPL/TPL options for DM_KEYBOARDMarcin Juszkiewicz
All three options had the same description. Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
2020-06-02usb: ohci: Add header file for ARCH_DMA_MINALIGNSimon Glass
This is defined in the asm/cache.h header file. Update this header file to include it so it gets the same value consistently across U-Boot. This fixes 'usb host' on omapl138_lcdk. Fixes: 90526e9fbac ("common: Drop net.h from common header") Reported-by: Adam Ford <aford173@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-06-02x86: spi: Rewrite logic for obtaining the SPI memory mapSimon Glass
At present this logic does not work on link and samus, since their SPI controller is not a PCI device, but a child of the PCH. Unfortunately, fixing this involves a lot of extra logic. Still, this was requested in the review of the fix-up patch, so here it is. Fixes: 92842147c31 ("spi: ich: Add support for get_mmap() method") Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> (on Intel minnowmax)
generated by cgit (git 2.34.1) at 2024-12-28 10:27:10 +0000