summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-06-02net: macb: Fix GMAC not work when enable DM_ETHWenyou Yang
Always search the PHY to determine the macb->phy_addr before using the PHY to fix "No PHY present" error. Fix the wrong test of the GMAC's phy interface mode, it should be PHY_INTERFACE_MODE_RGMII. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02net: mvpp2.c: Enable 10G support for port 0 (SFI)Stefan Chulski
This patch fixes some remaining issues in the mvpp2 driver for the 10GB support on port 0. These changes are: - Incorrect PCS configuration - Skip PHY configuration when no PHY is connected - Skip GMAC configurations if 10G SFI mode set Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02armv8/ls1046a: RGMII PHY requires internal delay on TxMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02armv8/ls1043a: RGMII PHY requires internal delay on TxMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02net: zynq_gem: Do not return -ENOSYS on successOlliver Schinagl
The .read_rom_hwaddr net_ops hook does not check the return value, which is why it was never caught that we are currently returning 0 if the read_rom_hwaddr function return -ENOSYS and -ENOSYS otherwise. In this case we can simplify this by just returning the result of the function. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2017-06-02net: designware: Add phy supply supportJacob Chen
Some board need a regulator for gmac phy, so add this code to handle it. Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02net: Kconfig:make PHY_GIGE and individual Micrel PHYs selectablePhilipp Tomsich
This change migrate the following configuration options for Kconfig: * PHY_GIGE, indicates that a controller (with an appropriate PHY) is Gigabit capable and enables extra support in the miiutil for parsing the status of Gigabit PHYs * adds configuration options for Micrel KSZ9021 and KSZ9031 GbE PHYs, which previously had to enabled through a board-specific config file Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-01QE: add QE support on SD bootZhao Qiang
modify u_qe_init to upload QE firmware from SD card when it is SD boot Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-06-01drivers: net: fsl-mc: Include MAC addr fixup to DPLBogdan Purcareata
Previous to MC v10.x, port mac address was specified via DPL. Since newer MC versions are compatible with old style DPLs, make the u-boot env mac addresses visible there. This applies only to DPLs that have an older version. DPLs use 32 bit values for specifying MAC addresses. U-boot environment variables take precedence over the MAC addresses already visible in the DPL/DPC. Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com> Signed-off-by: Heinz Wrobel <heinz.wrobel@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-06-01drivers: net: fsl-mc: Link MC boot to PHY_RESET_RBogdan Purcareata
DPAA2 platforms boot the Management Complex based on the u-boot env variable "mcinitcmd". Instead of doing this step on each platform individually, define a single mc_env_boot function in the MC driver, since it's semantically tied to it. Call the function in a per-board reset_phy hook, as it gets called at a later moment, when all board PHY devices have been initialized. Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com> Signed-off-by: Heinz Wrobel <heinz.wrobel@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-06-01dm: gpio: power: Convert pm8916 drivers to livetreeSimon Glass
This PMIC driver (power and GPIO) is used by the sandbox SPMI tests. Update the drivers to support a live device tree so that the tests pass. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: sandbox: sysreset: Convert driver to livetreeSimon Glass
Update this driver to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: sandbox: spi: Convert driver to support livetreeSimon Glass
Update this driver to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: spi-flash: Convert uclass to livetreeSimon Glass
Update the SPI flash uclass to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: sandbox: i2c_rtc: Drop fdtdec.h headerSimon Glass
This is not needed in this driver. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: sandbox: i2c: Drop fdtdec.h headerSimon Glass
This is not needed in this driver. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: spi: Convert uclass to livetreeSimon Glass
Update the SPI uclass to support a live device tree. Also adjust spi_slave_ofdata_to_platdata() to accept a device instead of a blob and offset. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01cros_ec: Update the cros_ec keyboard driver to livetreeSimon Glass
Update this driver and key_matrix to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: Update the I2C eeprom driver for livetreeSimon Glass
Update this driver so that it works with livetree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: pci: Update uclass to support livetreeSimon Glass
Update the PCI uclass to support livetree. This mostly involves fixing the address decoding from the device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: reset: Update uclass to support livetreeSimon Glass
Update the reset domain uclass to support livetree. Fix the xlate() method which has no callers. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: power-domain: Update uclass to support livetreeSimon Glass
Update the power domain uclass to support livetree. Fix the xlate() method which has no callers. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01sandbox: phy: Update driver for livetreeSimon Glass
Update the sandbox phy driver to support livetree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: phy: Update uclass to support livetreeSimon Glass
Update the phy uclass to support livetree. Fix the xlate() method which has no callers. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: mailbox: Update uclass to support livetreeSimon Glass
Update the mailbox uclass to support livetree. Fix the xlate() method in all callers. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: clk: fixed: Update to support livetreeSimon Glass
Update the fixed-rate clock driver to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: clk: Update uclass to support livetreeSimon Glass
Update the clk uclass to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01clk: Modify xlate() method for livetreeSimon Glass
Update the xlate() method to use ofnode_phandle_args instead of the fdtdec variant. This will allow drivers to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01sandbox: usb: Convert emulators to livetreeSimon Glass
Update the sandbox flash and hub USB emulators to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: usb: Convert uclass to livetreeSimon Glass
Update the usb uclass to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: adc: Convert uclass to livetreeSimon Glass
Update the adc uclass to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: mmc: Convert uclass to livetreeSimon Glass
Update the mmc uclass to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: regulator: Update fixed regulator to support livetree.Simon Glass
Update this driver to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: regulator: Convert regulator uclass to support livetreeSimon Glass
Update the regulator uclass to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01sandbox: pmic: Convert pmic emulator to support livetreeSimon Glass
Update this driver to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: pmic: Convert uclass to livetreeSimon Glass
Update the pmic uclass and all pmics to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: i2c: Convert uclass to livetreeSimon Glass
Update the i2c uclass to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: Add more livetree helpers and definitionsSimon Glass
Add some definitions and helpers for livetree in the main of.h header file. These include: - reading multi-cell integers - default number of address/size cells - functions for comparing names Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01fdt: Rename a few functions in fdt_supportSimon Glass
These two functions have an of_ prefix which conflicts with naming used in of_addr. Rename them: fdt_read_number fdt_support_bus_default_count_cells Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01cros_ec: Convert to support live treeSimon Glass
Convert this driver to support the live device tree and remove the old fdtdec support. The keyboard is not yet converted. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01cros_ec: Fix debug() statement in ec_command_inptr()Simon Glass
This prints out the wrong pointers. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: gpio: Add live tree supportSimon Glass
Add support for requesting GPIOs with a live device tree. This involves adjusting the function signature for the legacy function gpio_request_by_name_nodev(), so fix up all callers. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes to stm32f746-disco.c: Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-01dm: gpio: sandbox: Use dev_read...() functions to access DTSimon Glass
Use the new dev_read...() functions to access the device tree, so that a live tree can be used. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: gpio: Refactor to prepare for live tree supportSimon Glass
Move the main part of the GPIO request function into a separate function so that it can be used by the live tree function when added. Update the xlate method to use a node reference. Update all GPIO drivers to handle the modified xlate() method. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: core: Update uclass_find_device_by_phandle() for livetreeSimon Glass
Adjust this function to work with livetree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: simple-bus: Add support for livetreeSimon Glass
Modify simple-bus to support livetree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: regmap: Add support for livetreeSimon Glass
Modify regmap to support livetree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: core: Add a way to find a device by ofnodeSimon Glass
Add a function which looks up a device by its node (either in live tree or flat tree). Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: core: Scan the live tree when setting up driver modelSimon Glass
When starting up driver model with a live tree we need to scan the tree for devices. Add code to handle this. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: core: Update device_bind_driver_to_node() to use ofnodeSimon Glass
Adjust this function to us an ofnode instead of an offset, so it can be used with livetree. This involves updating all callers. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-01-29 16:32:30 +0000