summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-11-29powerpc/85xx: clean up and document the QE/FMAN microcode macrosTimur Tabi
Several macros are used to identify and locate the microcode binary image that U-boot needs to upload to the QE or Fman. Both the QE and the Fman use the QE Firmware binary format to package their respective microcode data, which is why the same macros are used for both. A given SOC will only have a QE or an Fman, so this is safe. Unfortunately, the current macro definition and usage has inconsistencies. For example, CONFIG_SYS_FMAN_FW_ADDR was used to define the address of Fman firmware in NOR flash, but CONFIG_SYS_QE_FW_IN_NAND contains the address of NAND. There's no way to know by looking at a variable how it's supposed to be used. In the future, the code which uploads QE firmware and Fman firmware will be merged. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-29powerpc/85xx: always implement the work-around for Erratum SATA_A001Timur Tabi
On the P1022/P1013, the work-around for erratum SATA_A001 was implemented only if U-Boot initializes SATA, but SATA is not initialized by default. So move the work-around to the CPU initialization function, so that it's always executed on the SOCs that need it. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-28Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingWolfgang Denk
* 'agust@denx.de' of git://git.denx.de/u-boot-staging: MAKEALL: drop obsolete mx31pdk_nand target dataflash: fix parameters order in write_dataflash() hawkboard: Replace HAWKBOARD_KICK{0, 1}_UNLOCK defines davinci_sonata: define CONFIG_MACH_TYPE for davinci_sonata board davinci_schmoogie: define CONFIG_MACH_TYPE for davinci_schmoogie board arm: a320evb: define mach-type in board config file OMAP3: Use sdelay from arch/arm/cpu/armv7/syslib.c instead of cloning that. Fix Stelian's email address
2011-11-28Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk
* 'master' of git://git.denx.de/u-boot-video: DIU: 1080P and 720P support CFB: Fix font rendering on mx5 framebuffer
2011-11-27Fix Stelian's email addressStelian Pop
Change my old email address which is no longer valid. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-27Merge branch 'master' of git://git.denx.de/u-boot-mmcWolfgang Denk
* 'master' of git://git.denx.de/u-boot-mmc: Revert "mmc: retry the cmd8 to meet 74 clocks requirement in the spec" mmc: mv_sdhci: Fix host version read for Armada100
2011-11-27drivers/bios_emulator/x86emu/ops2.c: Fix GCC 4.6 build warningKumar Gala
Fix: x86emu/ops2.c: In function 'x86emuOp2_set_byte': x86emu/ops2.c:171:11: warning: variable 'name' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-25Revert "mmc: retry the cmd8 to meet 74 clocks requirement in the spec"Macpaul Lin
This reverts commit 02f3029f1810b99869254d0cf0a71946a008a728. This patch add 3 times retry to CMD8 because the Marvell mmc controller doesn't obey the power ramp up process in the SD specification 6.4.1. (Please refer to figure 6.1 and 6.2 in the specification.) The CMD0 should be send after power ramp up has been finished. However, the Marvell mmc contorller must do power ramp up after the first CMD0 command has been send. This patch also affect existing platforms like Nokia N900 and other platforms. Signed-off-by: Macpaul Lin <macpaul@andestech.com> Acked-by: Lei Wen <leiwen@marvell.com> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2011-11-25mmc: mv_sdhci: Fix host version read for Armada100Ajay Bhargav
sdhci_readw does not work for host version read in Armada100 series SoCs. This patch fix this issue by making a sdhci_readl call to get host version. Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
2011-11-24DIU: 1080P and 720P supportJerry Huang
Add the 1920x1080 and 1280x720 resolution support. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> CC: Anatolij Gustschin <agust@denx.de>
2011-11-24CFB: Fix font rendering on mx5 framebufferMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2011-11-23Merge branch 'hs@denx.de' of git://git.denx.de/u-boot-stagingWolfgang Denk
* 'hs@denx.de' of git://git.denx.de/u-boot-staging: drivers/net/dnet.c: Fix GCC 4.6 warnings board/xaeniax/flash.c: Fix GCC 4.6 warnings net/bootp.c: Fix GCC 4.6 warning common/cmd_bootm.c: Fix GCC 4.6 warnings board/mx1ads/mx1ads.c: Fix GCC 4.6 warning board/mx1ads/syncflash.c: Fix GCC 4.6 warnings board/lubbock/flash.c: Fix GCC 4.6 warnings drivers/net/cs8900.c: Fix GCC 4.6 warning arch/arm/cpu/arm926ejs/omap/cpuinfo.c: Fix GCC 4.6 warnings drivers/net/lan91c96.c: Fix GCC 4.6 warning board/ronetix/pm9263/pm9263.c: Fix GCC 4.6 warning drivers/mtd/onenand/samsung.c: Fix GCC 4.6 warning drivers/usb/musb/musb_hcd.c: Fix GCC 4.6 warning
2011-11-23drivers/i2c/davinci_i2c.c: Fix GCC 4.6 warningAnatolij Gustschin
Fix: davinci_i2c.c: In function 'flush_rx': davinci_i2c.c:81:6: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
2011-11-23i2c: sh: Add support I2C for Renesas SHNobuhiro Iwamatsu
This supports I2C of Renesas SH. I tested on SH7724. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Heiko Schocher <hs@denx.de>
2011-11-23drivers/net/dnet.c: Fix GCC 4.6 warningsAnatolij Gustschin
Fix: dnet.c: In function 'dnet_send': dnet.c:136:9: warning: variable 'len' set but not used [-Wunused-but-set-variable] dnet.c: In function 'dnet_set_hwaddr': dnet.c:209:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] dnet.c:209:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] dnet.c:209:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] dnet.c:209:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-23drivers/net/cs8900.c: Fix GCC 4.6 warningAnatolij Gustschin
Fix: cs8900.c: In function 'get_reg_init_bus': cs8900.c:69:14: warning: variable 'c' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-23drivers/net/lan91c96.c: Fix GCC 4.6 warningAnatolij Gustschin
Fix: lan91c96.c: In function 'dump_memory_info': lan91c96.c:157:7: warning: variable 'mem_info' set but not used [-Wunused-but-set-variable] lan91c96.c: In function 'smc_send_packet': lan91c96.c:320:16: warning: variable 'ioaddr' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-23drivers/mtd/onenand/samsung.c: Fix GCC 4.6 warningAnatolij Gustschin
Fix: samsung.c: In function 's3c_onenand_check_lock_status': samsung.c:486:6: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-23drivers/usb/musb/musb_hcd.c: Fix GCC 4.6 warningAnatolij Gustschin
Fix: musb_hcd.c: In function 'submit_control_msg': musb_hcd.c:851:6: warning: variable 'csr' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-22Improve Power Management in SMC911X driver.bertrand.cachet@heig-vd.ch
device is already in *normal* (D0) mode => it doesn't need to be wake-up. With this patch, we only wake-up (writing on TEST_BYTE register) if PM_MODE bits of PM_CTRL register is in sleep (D1/D2) mode. Signed-off-by: Bertrand Cachet <bertrand.cachet@heig-vd.ch>
2011-11-22net: rtl8109: drop unused !NET_MULTI driverMike Frysinger
No one uses this driver, and it isn't converted to the NET_MULTI framework (which we dropped recently), so drop this driver too. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-22smsc95xx: Debug message cleanupWolfgang Grandegger
Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Wolfgang Grandegger <wg@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Simon Glass <sjg@chromium.org>
2011-11-22smsc95xx: Fix MAC address programmingWolfgang Grandegger
Commit 79ad54400932d6484178a372fb3b659e3437473b broke MAC address programming in the SMSC95xx register set. Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Wolfgang Grandegger <wg@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Simon Glass <sjg@chromium.org>
2011-11-21Merge branch 'sr@denx.de' of git://git.denx.de/u-boot-stagingWolfgang Denk
* 'sr@denx.de' of git://git.denx.de/u-boot-staging: Makefile: Add the missing dependency for spl target gpio: Adapt PCA9698 to standard GPIO API
2011-11-21Merge branch 'master' of git://git.denx.de/u-boot-nds32Wolfgang Denk
* 'master' of git://git.denx.de/u-boot-nds32: nds32/lib: add ide generic support nds32: enhance io.h for compatibility with periphals ftide020: fix incorrect information display format
2011-11-21Merge branch 'master' of git://git.denx.de/u-boot-niosWolfgang Denk
* 'master' of git://git.denx.de/u-boot-nios: nios2: Offer ft_board_setup() capability and call fdt_fixup_ethernet(). board/nios2-generic: Use altera_pio driver and remove board specific driver gpio: Add driver for Altera's PIO core nios2: Pseudo implement dcache_status/enable/disable()
2011-11-18gpio: Adapt PCA9698 to standard GPIO APIDirk Eibach
Signed-off-by: Dirk Eibach <eibach@gdsys.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Stefan Roese <sr@denx.de>
2011-11-18ftide020: fix incorrect information display formatMacpaul Lin
Fix incorrect information display format when probing the device. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-11-17e1000: fix unused variable waring for e1000 driverZang Roy-R61911
Fix the following build warning in drivers/net/e1000.c e1000.c: In function 'e1000_reset_hw': e1000.c:1373:11: warning: variable 'icr' set but not used [-Wunused-but-set-variable] e1000.c: In function 'e1000_phy_init_script': e1000.c:4395:11: warning: variable 'ret_val' set but not used [-Wunused-but-set-variable] Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Kyle Moffett <Kyle.D.Moffett@boeing.com>
2011-11-17e1000: remove duplicate macros in e1000.hTimur Tabi
Some of the EEPROM Word Offset macros, and a few others, are defined twice in e1000.h. Signed-off-by: Timur Tabi <timur@freescale.com>
2011-11-16drivers/rtc/s3c24x0_rtc.c: fix GCC 4.6 warningsAnatolij Gustschin
Fix: s3c24x0_rtc.c: In function 'rtc_get': s3c24x0_rtc.c:67:53: warning: variable 'a_armed' set but not used s3c24x0_rtc.c:67:45: warning: variable 'a_year' set but not used s3c24x0_rtc.c:67:38: warning: variable 'a_mon' set but not used s3c24x0_rtc.c:67:30: warning: variable 'a_date' set but not used s3c24x0_rtc.c:67:22: warning: variable 'a_hour' set but not used s3c24x0_rtc.c:67:15: warning: variable 'a_min' set but not used s3c24x0_rtc.c:67:8: warning: variable 'a_sec' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16drivers/video/bus_vcxk.c: Fix GCC 4.6 warningAnatolij Gustschin
Fix: bus_vcxk.c: In function 'vcxk_display_bitmap': bus_vcxk.c:396:16: warning: variable 'compression' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16drivers/video/da8xx-fb.c: Fix GCC 4.6 warningAnatolij Gustschin
Fix: da8xx-fb.c: In function 'video_hw_init': da8xx-fb.c:688:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16drivers/net/enc28j60.c: Fix GCC 4.6 warningsAnatolij Gustschin
Fix: enc28j60.c: In function 'enc_receive': enc28j60.c:435:5: warning: variable 'eir_reg' set but not used [-Wunused-but-set-variable] enc28j60.c: In function 'enc_poll': enc28j60.c:503:5: warning: variable 'estat_reg' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16drivers/net/at91_emac.c: Fix GCC 4.6 warningAnatolij Gustschin
Fix: at91_emac.c: In function 'at91emac_write_hwaddr': at91_emac.c:477:15: warning: variable 'dev' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16drivers/mtd/dataflash.c: Fix GCC 4.6 warningAnatolij Gustschin
Fix: dataflash.c: In function 'AT91F_DataflashInit': dataflash.c:42:6: warning: variable 'last_part' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16drivers/spi/atmel_spi.c: Fix GCC 4.6 warningAnatolij Gustschin
Fix: atmel_spi.c: In function 'spi_xfer': atmel_spi.c:139:7: warning: variable 'ret' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16sata_dwc.c: Fix GCC 4.6 build warningsStefan Roese
Fix: sata_dwc.c: In function 'sata_dwc_softreset': sata_dwc.c:444:5: warning: variable 'status' set but not used [-Wunused-but-set-variable] sata_dwc.c:443:6: warning: variable 'serror' set but not used [-Wunused-but-set-variable] sata_dwc.c: In function 'scan_sata': sata_dwc.c:654:16: warning: variable 'lba_desc' set but not used [-Wunused-but-set-variable] sata_dwc.c:538:16: warning: variable 'xfer_mask' set but not used [-Wunused-but-set-variable] sata_dwc.c: In function 'ata_dev_read_id': sata_dwc.c:747:14: warning: variable 'reason' set but not used [-Wunused-but-set-variable] sata_dwc.c: In function 'ata_dev_read_sectors': sata_dwc.c:1810:6: warning: variable 'rc' set but not used [-Wunused-but-set-variable] sata_dwc.c: In function 'ata_dev_write_sectors': sata_dwc.c:1994:6: warning: variable 'rc' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-164xx_enet.c: Fix GCC 4.6 build warningsStefan Roese
Fix: 4xx_enet.c: In function 'ppc_4xx_eth_init': 4xx_enet.c:875:6: warning: variable 'ethgroup' set but not used [-Wunused-but-set-variable] I used "__maybe_unused" here intentionally, since all other alternatives to fix this compilation warning would result in more ifdef's. Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16drivers/video/ct69000.c: Fix GC 4.6 build warningWolfgang Denk
Convert custom debug code to use standard debug() facility. This also fixes these build warning: ct69000.c: In function 'FindAndSetPllParamIntoXrRegs': ct69000.c:706:28: warning: variable 'new_pixclock' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
2011-11-16drivers/block/sym53c8xx.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: sym53c8xx.c: In function 'scsi_write_dsp': sym53c8xx.c:456:16: warning: variable 'val' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-16drivers/block/sata_sil3114.c: Fix GCC 4.6 build warningKumar Gala
Fix: sata_sil3114.c: In function 'scan_sata': sata_sil3114.c:793:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:794:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:795:39: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:795:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:797:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:800:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:801:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:802:39: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:802:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:804:7: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-16drivers/bios_emulator/x86emu/ops.c: Fix GCC 4.6 build warningKumar Gala
Fix: x86emu/ops.c: In function 'x86emuOp_int3': x86emu/ops.c:3521:9: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] x86emu/ops.c: In function 'x86emuOp_int_IMM': x86emu/ops.c:3549:9: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] x86emu/ops.c: In function 'x86emuOp_into': x86emu/ops.c:3579:9: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] x86emu/ops.c: In function 'x86emuOp_aad': x86emu/ops.c:3993:8: warning: variable 'a' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-16drivers/block/ahci.c: Fix GCC 4.6 build warningKumar Gala
Fix: ahci.c: In function 'ata_scsiop_read10': ahci.c:564:6: warning: variable 'lba' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-16davinci, mmc: fix gcc 4.6 build warningsHeiko Schocher
Fix: davinci_mmc.c: In function 'dmmc_wait_fifo_status': davinci_mmc.c:72:7: warning: variable 'mmcstatus1' set but not used [-Wunused-but-set-variable] davinci_mmc.c: In function 'dmmc_busy_wait': davinci_mmc.c:89:7: warning: variable 'mmcstatus1' set but not used [-Wunused-but-set-variable] Delete the unused variable. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-11-16FPGA: drivers/fpga/ivm_core.c: GCC4.6 fix build warningsStefano Babic
Fix: ivm_core.c: In function 'ispVMLCOUNT': ivm_core.c:2105:16: warning: unused variable 'usByte' Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Wolfgang Denk <wd@denx.de>
2011-11-16Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk
* 'master' of git://git.denx.de/u-boot-video: api: export LCD device to external apps font: split font data from video_font.h tools: logo: split bmp arrays from bmp_logo.h lcd: add clear and draw bitmap declaration VIDEO: mx3fb: GCC4.6 fix build warnings Powerpc/DIU: Fixed the 800x600 and 1024x768 resolution bug
2011-11-16Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
* 'master' of git://git.denx.de/u-boot-arm: arm, davinci: add DAVINCI_MMC_CLKID arm, davinci_emac: fix driver bug if more then 3 PHYs are detected arm, davinci: da850/dm365 lowlevel cleanup omap5: Add omap5_evm board build support. omap4/5: Add support for booting with CH. omap5: emif: Add emif/ddr configurations required for omap5 evm omap5: clocks: Add clocks support for omap5 platform. omap5: Add minimal support for omap5430. omap: Checkpatch fixes omap4: make omap4 code common for future reuse GCC4.6: Squash warnings in onenand_base.c GCC4.6: Fix common/usb.c on xscale OneNAND: Add simple OneNAND SPL PXA: vpac270: Enable the new generic MMC driver PXA: Cleanup serial_pxa PXA: Drop csb226 and innokom boards (unmaintained) m28evk: Fix comment about the number of RAM banks mx31: Fix checkpatch warnings in generic.c mx31: Use proper IO accessor for GPR register mx31: Remove duplicate definition for GPR register qong: Use generic function for configuring GPR register M28EVK: Enable USB HOST support iMX28: Add USB HOST driver iMX28: Add USB and USB PHY register definitions M28: Add memory detection into SPL iMX28: Fix ARM vector handling M28: Add doc/README.m28 documentation M28: Add MMC SPL iMX28: Add support for DENX M28EVK board iMX28: Add u-boot.sb target to Makefile iMX28: Add image header generator tool iMX28: Add driver for internal RTC iMX28: Add GPMI NAND driver iMX28: Add APBH DMA driver iMX28: Add SPI driver iMX28: Add GPIO control iMX28: Add I2C bus driver iMX28: Add PINMUX control FEC: Add support for iMX28 quirks iMX28: Add SSP MMC driver iMX28: Initial support for iMX28 CPU MX25: zmx25: GCC4.6 fix build warnings da850: add new config file for AM18xx BeagleBoard: config: Switch to ttyO2 OMAP3: Change omap3_evm maintainer devkit8000: Fix NAND SPL on boards with 256MB NAND integrator: enable Vpp and disable flash protection integrator: add system controller header integrator: make flash writeable on boot integrator: use io-accessors for board init integrator: move text offset to config integrator: pass configs for core modules ARM: remove superfluous setting of arch_number in board specific code. SPL: Allow ARM926EJS to avoid compiling in the CPU support code integrator: do not test first part of the memory arm: a320: fix broken timer ARM: define CONFIG_MACH_TYPE for all ronetix boards dm646x: pass board revision info to kernel dm646x: add new configuration for dm6467T arm, davinci: Fix setting of the SDRAM configuration register arm, davinci: Remove the duplication of LPSC functions arm, davinci: Rename AM1808 lowlevel functions to DA850 da8xxevm: fix build error ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
2011-11-16Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
* 'master' of git://git.denx.de/u-boot-mpc85xx: powerpc/85xx: Fix builds of P1020/P2020RDB-PC_36BIT_NAND arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc8xxx/ddr/options.c: Fix GCC 4.6 build warning drivers/qe/uec.c: Fix GCC 4.6 build warning drivers/usb/host/ehci-fsl.c: Fix GCC 4.6 build warning drivers/net/fm/fm.c: Fix GCC 4.6 build warning board/sbc8560/sbc8560.c: Fix GCC 4.6 build warning board/sbc8548/sbc8548.c: Fix GCC 4.6 build warning board/freescale/mpc8569mds/mpc8569mds.c: Fix GCC 4.6 build warning board/freescale/mpc8568mds/mpc8568mds.c: Fix GCC 4.6 build warning board/freescale/mpc8548cds/mpc8548cds.c: Fix GCC 4.6 build warning board/freescale/common/pixis.c: Fix GCC 4.6 build warning board/freescale/common/cds_pci_ft.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc8xxx/fsl_lbc.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc85xx/tlb.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc85xx/cpu_init.c: Fix GCC 4.6 build warning phylib: Enable AR8021 phy support powerpc/85xx: Set max alloc length to 10MB on P1022DS powerpc/mpc85xx: Set SYSCLK to the required frequency powerpc/85xx: Fix NAND SPL support powerpc/85xx: Fix MPC8572DS NAND build fsl_ifc: Fixed a bug in the erratum handling code for IFC_A003399 powerpc/85xx: Add support for Book-E MMU Arch v2.0 powerpc/85xx: Make inclusion of USB device fixup conditional powerpc/85xx: Fix warning for USB device-fixup powerpc/85xx: resize the boot page TLB before relocating CCSR powerpc/85xx: verify the current address of CCSR before relocating it powerpc/85xx: add some missing sync instructions in the CCSR relocation code powerpc/85xx: fix some comments in the CCSR relocation code powerpc/85xx: fix definition of MAS register macros powerpc/mpc8548cds: Fix network initialization powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129 powerpc/QorIQ: fix network frame manager TBI PHY address settings
2011-11-16Merge branch 'master' of git://git.denx.de/u-boot-i2cWolfgang Denk
* 'master' of git://git.denx.de/u-boot-i2c: fsl_i2c: Fix compile warning
generated by cgit (git 2.34.1) at 2024-12-27 15:01:39 +0000