summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-02-02Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-01-28mxs: mmc: Fix the MMC driver for MX23Marek Vasut
The MX23 has different layout of DMA channels. Fix the MMC driver to support MX23. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2013-01-28mxs: mmc: Allow overriding default card detect implementationMarek Vasut
Some MXS based boards do not implement the card-detect signal. Allow user to specify alternate card-detect implementation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2013-01-28mxs: mmc: Fix MMC reset on iMX23Otavio Salvador
This does the same reset mask as done in v3.7 Linux kernel code. The block is properly configured for MMC operation that way. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2013-01-28mxs: dma: Fix APBH DMA driver for MX23Marek Vasut
The MX23 has less channels for the APBH DMA, sligtly different register layout and some bits in those registers are placed differently. Reflect this in the driver. This patch fixes MMC/DMA issue on MX23. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2013-01-28net: fec_mxc: get phydev before fec_probeTroy Kisky
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2013-01-28net: fec_mxc: only call phy_connect in fec_probeTroy Kisky
This allows us to create the phydev before calling fec_probe in later patch. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2013-01-28net: fec_mxc: use fec_set_dev_name to set nameTroy Kisky
This allows us to create the phydev before calling fec_probe in later patch. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2013-01-28phy: add phy_find_by_mask/phy_connect_devTroy Kisky
It is useful to be able to try a range of possible phy addresses to connect. Also, an ethernet device is not required to use phy_find_by_mask leading to better separation of mii vs ethernet, as suggested by Andy Fleming. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2013-01-28net: fec_mxc: have fecmxc_initialize call fecmxc_initialize_multiTroy Kisky
Having only one call to fec_probe will ease the changing of its parameters. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2013-01-28net: fec_mxc: change fec_mii_setspeed parameterTroy Kisky
Only the hardware ethernet registers are needed for this function, so don't pass the more general structure. I'm trying to separate MII and fec. This also fixes MX28 fec_mii_setspeed use on secondary ethernet port This was found by inspection of the code and should be checked on real hardware. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2013-01-28net: fec_mxc: delete CONFIG_FEC_MXC_MULTITroy Kisky
It is more logical to test for CONFIG_FEC_MXC_PHYADDR to determine whether to define the function fecmxc_initialize. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2013-01-21mmc: Limit the number of used SSP ports on MX23Marek Vasut
The MX23 can only use two SSP ports. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andy Fleming <afleming@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
2013-01-21mxs: clock: Use 'mxs' prefix for methodsOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2013-01-21mxs: ssp: Pull out the SSP bus to regs conversionMarek Vasut
Create function which converts SSP bus number to SSP register pointer. This functionality is reimplemented multiple times in the code, thus make one common implementation. Moreover, make it a switch(), since the SSP ports are not mapped in such nice linear fashion on MX23, therefore having it a switch will simplify things there. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andy Fleming <afleming@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2013-01-21mxs: mmc: Drop unused members from struct mxsmmc_privMarek Vasut
The clock data are not used by the driver, drop them. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andy Fleming <afleming@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2013-01-16video: tegra: Update line length to match resolutionThierry Reding
Instead of storing the computed line length in a local variable, store it in the global lcd_line_length variable to make sure the LCD subsystem can properly draw content for the display resolution. This probably wasn't noticed yet because the only board where LCD support is currently enabled is Seaboard, which runs at a 1366x768 resolution. As it happens this is the maximum resolution supported and also the default that is used to initialize the framebuffer before the configuration from DT is available. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-01-14Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingTom Rini
2013-01-14twl4030: fix 'could could' in error messagesPeter Meerwald
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
2013-01-14Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-01-14Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-01-14video: exynos_fb: Make a call to draw_logo only when CONFIG_CMD_BMP is selectedAjay Kumar
Previously, the call to draw_logo() was happening irrespective of whether we have selected logo or LCD console. With this patch we call draw_logo() only when CONFIG_CMD_BMP is selected. This would even fix the following compilation warning: exynos_fb.c: In function 'draw_logo': exynos_fb.c:74:8: warning: variable 'addr' set but not used [-Wunused-but-set-variable] exynos_fb.c:73:9: warning: variable 'y' set but not used [-Wunused-but-set-variable] exynos_fb.c:73:6: warning: variable 'x' set but not used [-Wunused-but-set-variable] Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-14video: exynos_dp: Remove unused variable disp_infoAjay Kumar
Remove unused variable disp_info to fix the following compilation warning: exynos_dp.c: In function 'exynos_init_dp': exynos_dp.c:860:23: warning: variable 'disp_info' set but not used [-Wunused-but-set-variable] Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-14I2C: S3C24X0: Resolve build error for VCMA9Rajeshwari Shinde
This patch resolves the following build errors for I2C driver in VCMA9: In file included from s3c24x0_i2c.c:40:0: s3c24x0_i2c.h:38:17: error: field 'id' has incomplete type s3c24x0_i2c.c:70:39: error: 'CONFIG_MAX_I2C_NUM' undeclared here (not in a function) s3c24x0_i2c.c:70:31: warning: 'i2c_bus' defined but not used [-Wunused-variable] s3c24x0_i2c.c:72:12: warning: 'i2c_busses' defined but not used [-Wunused-variable] Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-13mx31/mx35/mx51/mx53/mx6: add watchdogTroy Kisky
Use a common watchdog driver for all these cpus. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
2013-01-11Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2013-01-10serial/ns16550: add an option to avoid hanging on broken platformsJavier Martinez Canillas
Some platforms (e.g. IGEPv2 board) has a broken ns16550 UART that does not set the TEMT bit when the transmitter is empty in SPL. This makes U-Boot to hang while waiting for TEMT to be set. Add a new option to avoid this: CONFIG_SYS_NS16550_BROKEN_TEMT 16550 UART set the Transmitter Empty (TEMT) Bit when all output has finished and the transmitter is totally empty. U-Boot waits for this bit to be set to initialize the serial console. On some broken platforms this bit is not set in SPL making U-Boot to hang while waiting for TEMT. Define this option to avoid it. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2013-01-10cfi_flash: Report Advanced Sector Protection (PPB) with flinfo cmdStefan Roese
Report the usage of the Advanced Sector Protection (PPB) to the user upon 'flinfo' command. E.g: Bank # 1: CFI conformant flash (16 x 16) Size: 64 MB in 512 Sectors AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x227E2301 Advanced Sector Protection (PPB) enabled Erase timeout: 16384 ms, write timeout: 2 ms Buffer write timeout: 5 ms, buffer size: 32 bytes Sector Start Addresses: FC000000 E FC020000 E RO FC040000 E FC060000 E FC080000 E ... Signed-off-by: Stefan Roese <sr@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Holger Brunck <holger.brunck@keymile.com> Tested-by: Holger Brunck <holger.brunck@keymile.com>
2013-01-10cfi_flash: Enable PPB protection for all AMD cmdset flash chipsStefan Roese
Not only Spansion supports the Persistent Protection Bits (PPB) locking. Other devices like the Micron JS28F512M29EWx also support this type of locking/unlocking. Detection of support is done in the same way as done for the Spansion chips - via the 0x49 CFI word. This patch enables this PPB protection mechanism for all AMD type (AMD commandset) chips. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Holger Brunck <holger.brunck@keymile.com> Tested-by: Holger Brunck <holger.brunck@keymile.com>
2013-01-10cfi_flash: Read PPB sector protection from device for AMD/Spansion chipsStefan Roese
Patch 66863b05 [cfi_flash: add support for Spansion flash PPB sector protection] introduced the PPB (Persistent Protection Bit) locking for Spansion chips. But right now the sector protection status (locked vs unlocked) is set to unlocked for all sectors upon bootup. The real sector protection status is ignored. This patch now reads the current sector protection status and uses it for these AMD/Spansion flash chips. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Holger Brunck <holger.brunck@keymile.com> Tested-by: Holger Brunck <holger.brunck@keymile.com>
2013-01-10cfi_flash: Add manufact_match helper functionStefan Roese
Consolidate manufacturer matching into the function manufact_match() and use it. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Holger Brunck <holger.brunck@keymile.com>
2013-01-10mtd/cfi: add support for SST 4KB sector granularityAngelo Dureghello
Add support for SST 4KB sector granularity. Many recent SST flashes, i.e. SST39VF3201B and similar of this family are declared CFI-conformant from SST. They support CFI query, but implement 2 different sector sizes in the same memory: a 64KB sector (they call it "block", std AMD erase cmd=0x30), and a 4KB sector (they call it "sector", erase cmd=0x50). Also, CFI query on these chips, reading from address 0x2dh of cfi query struct, detects a number of secotrs for the 4KB granularity (flinfo shows it). For all other aspects, they are CFI compliant, so, as Linux do, i think it's a good idea to handle these chips in the CFI driver, with a fixup to allow 4KB granularity, as should be expected, instead of 64KB. Signed-off-by: Angelo Dureghello <sysamfw@gmail.com> Signed-off-by: Stefan Rose <sr@denx.de>
2013-01-10video: Modify exynos_fimd driver to support LCD consoleAjay Kumar
Currently, exynos FIMD driver is being used to support only TIZEN LOGOs. In order to get LCD console, we need to enable half word swap feature of FIMD and use 16 BPP. LCD console and proprietary Logo cannot be used simultaneously. We use "logo_on" field inside vidinfo_t structure to decide whether user wants Logo or Console. Define CONFIG_CMD_BMP and make logo_on = 1 to get Logo on screen. Use logo_on = 0 to get output console on LCD. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-10PMIC: MAX77686: Add FDT SupportRajeshwari Shinde
This patch adds fdt support to MAX77686. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-09Merge 'u-boot-atmel/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-01-09Fix SPL build for non-ARM targetsAlbert ARIBAUD
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-01-09video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boardsŁukasz Majewski
lcd_set_flush_dcache(1) function is called from exynos_fb.c configuration file to enable lcd_sync function. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-09kirkwood: make MPP arrays static constAlbert ARIBAUD
This saves stack and code memory for local copy, and consumes initialized data memory. For 22 of the 29 kirkwood-based boards, this results in a global saving of about 30 bytes. For 7 of them, it results in an increase of 6 to 14 bytes. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-01-09mv88e61xx: refactor PHY and SWITCH level-codeAlbert ARIBAUD
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-01-08Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2013-01-08Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-01-08Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD
This required manual merging drivers/mtd/nand/Makefile and adding am335x_evm support for CONFIG_SPL_NAND_DRIVERS
2013-01-08EHCI: Exynos: Add fdt supportRajeshwari Shinde
Adding fdt support to ehci-exynos in order to parse register base addresses from the device node. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-08SPI: EXYNOS: Add FDT support to driver.Rajeshwari Shinde
This patch adds FDT support to the SPI driver. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-08Sound: WM8994: Add FDT support to codecRajeshwari Shinde
This patch adds FDT support to the codec. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-08Sound: Add FDT support to driverRajeshwari Shinde
This patch adds FDT support to the sound driver. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-08I2C: Driver changes for FDT supportRajeshwari Shinde
Functions added to get the I2C bus number and reset I2C bus using FDT node. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-05fsl_esdhc: add MMC_MODE_HC host_capsShawn Guo
All esdhc variants we know should support high capacity MMC cards, so let's add MMC_MODE_HC host_caps unconditionally to support those MMC cards (capacity > 2 GB). Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-22Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2012-12-22Merge samsung, imx, tegra into u-boot-arm/masterAlbert ARIBAUD
This commit merges branches from samsung, imx and tegra meant to fix merge issues between u-boot/master and u-boot-arm/master, as well as a few manual merge fixes.
generated by cgit (git 2.34.1) at 2024-12-27 13:57:01 +0000