summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-01-27i2c: stm32: Update to use standard enums for speedSimon Glass
Update this driver to use the new standard enums for speed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Tested-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-01-27i2c: omap: Update to use standard enums for speedSimon Glass
Update this driver to use the new standard enums for speed. Note: This driver needs to move to driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-01-27i2c: kona_i2c: Update to use standard enums for speedSimon Glass
Update this driver to use the new standard enums for speed. Note: This driver needs to move to driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-01-27i2c: designware_i2c: Update to use standard enums for speedSimon Glass
Update this driver to use the new standard enums for speed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-01-27i2c: ast_i2c: Update to use standard enums for speedSimon Glass
Update this driver to use the new standard enums for speed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-01-27i2c: designware_i2c: Add spike supressionSimon Glass
Some versions of this peripheral include a spike-suppression phase of the bus. Add support for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-01-27i2c: designware_i2c: Rewrite timing calculationSimon Glass
At present the driver can end up with timing parameters which are slightly faster than those expected. It is possible to optimise the parameters to get the best possible result. Create a new function to handle the timing calculation. This uses a table of defaults for each speed mode rather than writing it in code. The function works by calculating the 'period' of each bit on the bus in terms of the input clock to the controller (IC_CLK). It makes sure that the constraints are met and that the different components of that period add up correctly. This code was taken from coreboot which has ended up with this same driver, but now in a much-different form. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-01-27i2c: designware_i2c: Put hold config in a structSimon Glass
Create a struct to hold the three timing parameters. This will make it easier to move these calculations into a separate function in a later patch. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-01-27i2c: designware_i2c: Drop scl_sda_cfg parameterSimon Glass
Instead of passing this parameter into __dw_i2c_set_bus_speed(), pass in the driver's private data, from which the function can obtain that information. This allows the function to have access to the full state of the driver. Signed-off-by: Sicomp_param1mon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-27i2c: designware_i2c: Read device-tree propertiesSimon Glass
The i2c controller defines a few timing properties. Read these in and store them for use by the driver. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-01-27i2c: designware_i2c: Use an accurate bus clock instead of MHzSimon Glass
At present the driver uses an approximation for the bus clock, e.g. 166MHz instead of 166 2/3 MHz. This can result in small errors in the resulting I2C speed, perhaps 0.5% or so. Adjust the existing code to start from the accurate figure, even if later rounding reduces this accuracy. Update the bus speed code to work in KHz instead of MHz, which removes most of the error. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-01-27i2c: designware_i2c: Use an enum for selected speed modeSimon Glass
Group these #defines into an enum to make it easier to understand the relationship between them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jun Chen <ptchentw@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-01-27i2c: designware_i2c: Rename 'max' speed to 'high' speedSimon Glass
Some SoCs support a higher speed than what is currently called 'max' in this driver. Rename it to 'high' speed, which is the official name of the 3.4MHz speed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jun Chen <ptchentw@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-01-27i2c: designware_i2c: Include clk.h in the header fileSimon Glass
We use struct clk here so really should include this header file to avoid build errors. Also switch the order of clk.h in the C file to match the required code style. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Jun Chen <ptchentw@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-01-27i2c: designware_i2c: Don't allow changing IC_CLKSimon Glass
If a different input clock is required then the correct way to do this is with a clock driver. Don't allow boards to override IC_CLK. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-01-27i2c: designware_i2c: Add more registersSimon Glass
Some versions of this peripherals provide more control of the bus behaviour. Add definitions for these registers. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Jun Chen <ptchentw@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-01-26common: fix regression on block cache initAngelo Durgehello
m68k needs block cache list initialized after relocation. Other architectures must not be involved. Fixing regression related to: commit 1526bcce0f7285087621e16e6720636d01839da8 ("common: add blkcache init") Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-26arm: mvebu: fix A38x breakage from commit bb872dd930ccJoel Johnson
This function parameter usage of load_addr was incorrectly caught in the clarifying renames of commit bb872dd930cc, which results in boot failures on Marvell A38x. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Patch-to: Simon Glass <sjg@chromium.org>
2020-01-26Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- Libre Computer ALL-H3-IT/ALL-H5-CC board (Chen-Yu Tsai) - Allwinner R40 Ethernet, usb phy enablement (Andre Przywara) - Sunxi auto load from 128KB MMC offset (Andre Przywara) - Orange Pi Win Ethernet phy enablement (Jernej Skrabec)
2020-01-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
Updates and fixes for ls1028a, lx2160a, ls1012a, ls1021a, ls2080a, ls1088a platforms: - lx2-rev2 pcie support, enetc related updates, layerscape-pcie fixes
2020-01-25common: add blkcache initAngelo Durgehello
On m68k, block_cache list is relocated, but next and prev list pointers are not adjusted to the relocated struct list_head address, so the first iteration over the block_cache list hangs. This patch initializes the block_cache list after relocation. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com> Reviewed-by: Eric Nelson <eric@nelint.com>
2020-01-25net: macb: Drop local cache flushVignesh Raghavendra
Now that arch specific dma mapping APIs take care of cache flush/invalidate, drop local cache flush operation. While at that fix dma_unmap_single() call to match new prototype Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-01-25mtd: denali: Drop custom dma mapping functionsVignesh Raghavendra
Drop local dma_map_single() and dma_unmap_single() and use arch specific common implementation Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-25mmc: tmio-common: Drop custom dma mapping functionsVignesh Raghavendra
Drop local dma_map_single() and dma_unmap_single() and use arch specific common implementation Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-25fastboot: mt85xx: add command to flash/erase emmc hwpartmingming lee
This patch includes the following: 1. Add fastboot command to erase the whole EMMC_USER 2. Add fastboot command to flash image at EMMC_BOOT1 3. Add fastboot command to erase the whole EMMC_BOOT1 4. Enale CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT for mt8518 Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-25usb: musb-new: mt85xx: add musb-new gadget driver.mingming lee
Using musb-new structure for mt85xx gadget driver. Add gadget driver dts for mt8518 SoCs. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-25crypto: make mod_exp_sw() staticHeinrich Schuchardt
Function mod_exp_sw() is only used via the operators of the uclass. It is not defined in any include. Make mod_exp_sw() static. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-25lib: Kconfig dependencies for pseudo-random libraryHeinrich Schuchardt
drivers/rng/sandbox_rng.c requires rand() to be defined but configuration option CONFIG_CONFIG_LIB_RAND selected in drivers/rng/Kconfig does not exist. test/lib/test_aes.c requires rand() to be defined. Fix the selection criteria for choice "Pseudo-random library support type". Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-24phy: sun4i-usb: Add Allwinner R40 supportAndre Przywara
Since every Allwinner USB PHY seems to be slightly different from each other, we need to add the compatible string and the respective data structure to make it work on the R40/V40 SoC. Nothing spectacular this time, just one less USB controller than the H3. Copied from the Linux kernel. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24common: Move hang() to the same header as panic()Simon Glass
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-24common: Move RAM-sizing functions to init.hSimon Glass
These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Rename and move source()Simon Glass
This function has a very generic name which does not adequately describe its purpose. Rename it and move it to image.h, since it relates to reading a script from an image. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move the image globals into image.hSimon Glass
These three globals relate to image handling. Move them to the image header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24image: Rename load_addr, save_addr, save_sizeSimon Glass
These global variables are quite short and generic. In fact the same name is more often used locally for struct members and function arguments. Add a image_ prefix to make them easier to distinguish. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move reset_cpu() to the CPU headerSimon Glass
Move this function out of common.h and into a relevant header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move get_tbclk() to time.hSimon Glass
This function related to timer and most of the timer functions are in time.h, so move this function there. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move clock functions into a new fileSimon Glass
These three clock functions don't use driver model and should be migrated. In the meantime, create a new file to hold them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move ll_boot_init() to init.hSimon Glass
This is an init-related function so belongs in that file. Move it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Drop floppy disk supportSimon Glass
This seems pretty old now. It has not been converted to driver model and is not used by any boards. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24serial: ns16550: Use old baud rate divisor for flushing if not givenPatrik Dahlström
If baud_divisor is not set (i.e. == -1), we should use the baud divisor already in use for flushing the xmit register. If we don't flush the xmit register, then SPL will hang. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
2020-01-24remoteproc: elf_loader: fix program header parsingFabien Dessenne
Fix an issue where some sections are never loaded : if p_type is different from PT_LOAD the phdr pointer must be incremented. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Suman Anna <s-anna@ti.com>
2020-01-24drivers: net: fsl_enetc: fix SXGMII MAC configurationAlex Marginean
Separate MAC and serdes configuration, MAC configuration must be applied at each enetc_start() as FLR clears it. This restores traffic for ENETC interfaces in USXGMII mode. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24pci: layerscape: device tree fixup based on SoC andWasim Khan
lx2160a rev1 requires layerscape_gen4 device tree fixup and lx2160a rev2 requires layerscape device tree fixup. Add device tree fixup for lx2160a based on SoC and Version. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24pci: layerscape: Move streamId allocation to common device tree fixupWasim Khan
Move streamId allocation to layerscape common device tree fixup. Calculate streamId based on SoC variant. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24pci: layerscape: Common device tree fixup for NXP SoCsWasim Khan
Add Common device tree fixup for NXP SoCs. Based on SoC and revision call pcie_layerscape or pcie_layerscape_gen4 fixup. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24drivers: net: fsl_enetc: add write_hwaddr() for LS1028AMichael Walle
The LS1028A SoC is special in the handling of the MAC addresses. We need to write to the IERB version of the PSIPMAR0/1 register. This value will be sampled into the corresponding port PSIPMAR0/1 register if the PCI memory access is enabled. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24drivers: net: fsl_enetc: use write_hwaddr()Michael Walle
Intead of setting the MAC address in enetc_start() use the proper write_hwaddr(). U-Boot takes care of the random MAC address, too. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24pci: layerscape: Fix the BARs disable functionHou Zhiqiang
There is not any difference for disabling BARs in RC mode between PCIe controllers with and without SRIOV. Fixes: 80afc63fc342 ("pci: layerscape: add pci driver based on DM") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24pci: layerscape: Fix the disabling of Expansion ROM BARHou Zhiqiang
The software will still get non-zero Expansion ROM BAR size even when the BAR_EN bit is cleared. The BAR_EN bit of register EXP_ROM_BAR_MASK_RC is not working as expected, so this patch changes to mask all the bits. Fixes: 80afc63fc342 ("pci: layerscape: add pci driver based on DM") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24drivers: net: fsl_enetc: Pass on primary MAC address to LinuxAlex Marginean
Passes on the primary address used by u-boot to Linux. The code does a DT fix-up for ENETC PFs and sets the primary MAC address in IERB. The address in IERB is restored on ENETC PCI functions at FLR. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit (git 2.34.1) at 2025-01-27 21:57:08 +0000