summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-08-13mtd: rawnand: stm32_fmc2: get resources from parent nodeChristophe Kerello
FMC2 EBI support has been added. Common resources (registers base address and clock) can now be shared between the 2 drivers using "st,stm32mp1-fmc2-nfc" compatible string. It means that the common resources should now be found in the parent device when EBI node is available. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driverChristophe Kerello
The driver adds the support for the STMicroelectronics FMC2 EBI controller found on STM32MP SOCs. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: use clrsetbits_le32Christophe Kerello
This patch uses clrsetbits_le32 function instead of multiple instructions. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macrosChristophe Kerello
This patch removes custom macros and uses FIELD_PREP and FIELD_GET macros. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: cosmetic change to use nfc instead of fmc2 where ↵Christophe Kerello
relevant This patch renames functions and local variables. This cleanup is done to get all functions starting by stm32_fmc2_nfc in the FMC2 raw NAND driver when all functions will start by stm32_fmc2_ebi in the FMC2 EBI driver. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_5S for timeoutsChristophe Kerello
FMC2_TIMEOUT_5S will be used each time that we need to wait. It was seen, during stress tests in an overloaded system, that we could be close to 1 second, even if we never met this value. To be safe, FMC2_TIMEOUT_MS is set to 5 seconds. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: remove useless inline commentsChristophe Kerello
Remove inline comments that are useless since function label are self explanatory. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: fix a buffer overflowChristophe Kerello
The chip select defined in the device tree could only be 0 or 1. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13usb: host: dwc3-sti-glue: Fix ofnode_valid() parameterPatrice Chotard
node varaible is used as iterator into ofnode_for_each_subnode() loop, when exiting of it, node is no more a valid ofnode. Use dwc3_node instead as parameter of ofnode_valid() Fixes: ac28e59a574d ("usb: Migrate to support live DT for some driver") Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Cc: Kever Yang <kever.yang@rock-chips.com>
2020-08-07led: led_cortina: Add CAxxx LED supportJway Lin
Add Cortina Access LED controller support for CAxxxx SOCs Signed-off-by: Jway Lin <jway.lin@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Simon Glass <sjg@chromium.org> Add head file fixed link error and remove unused flashing function Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-06Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usbTom Rini
- XHCI updates to support MIPS better
2020-08-06blkcache: Extend blkcache_init to cover CONFIG_NEEDS_MANUAL_RELOCOvidiu Panait
Extend manual relocation of block_cache list pointers to all platforms that enable CONFIG_NEEDS_MANUAL_RELOC. Remove m68k-specific checks and provide a single implementation that adds gd->reloc_off to the pre-relocation pointers. Acked-by: Angelo Dureghello <angelo.dureghello@timesys.com> Tested-by: Angelo Dureghello <angelo.dureghello@timesys.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Eric Nelson <eric@nelint.com> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> [trini: Add guard around DECLARE_GLOBAL_DATA_PTR to avoid size growth] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-06drivers: serial: Make serial_initialize return intOvidiu Panait
serial_initialize is called only during the common init sequence, after relocation (in common/board_r.c). Because it has a void return value, it has to wrapped in initr_serial. In order to be able to get rid of this indirection, make serial_initialize return int. Remove extern from prototype in order to silence the following checkpatch warning: check: extern prototypes should be avoided in .h files Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06dm: blk: Use IS_ENABLED() instead of #ifdefs in blk_post_probeOvidiu Panait
Use IS_ENABLED() instead of #ifdef in blk_post_probe function. No functional change intended. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> [trini: Fix thinko and use CONFIG_HAVE_BLOCK_DEVICE in IS_ENABLED()] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-05usb: xhci: Add virt_to_phys() to support mapped platformsStefan Roese
Some platforms, like MIPS Octeon, use mapped addresses (virtual address != physical address). On these platforms we need to make sure, that the local virtual addresses are converted to physical (DMA) addresses for the xHCI controller. This patch adds the missing virt_to_phys() calls, so that the correct addresses are used. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de>
2020-08-05usb: usb-uclass.c: Drop le16_to_cpu() as values are already swappedStefan Roese
These values are already swapped to CPU endianess, so swapping them again is a bug. Let's remove the swap here instead. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de>
2020-08-05usb: xhci: xhci_mem_init: Use cpu_to_le64() and not xhci_writeq()Stefan Roese
xhci_writeq() makes the CPU->LE swapping only when addressing registers in the xHCI controller address range and not in the local memory (RAM). We need to use cpu_to_le64() here to ensure that the conversion is done correctly. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de>
2020-08-05usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)Stefan Roese
While trying to use the U-Boot xHCI driver on the MIPS Octeon platform, which is big endian, I noticed that the driver is missing a few endian conversion calls. This patch adds these missing endian conversion calls. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de>
2020-08-04pinctrl: aspeed: Fix Kconfig entry indentationMichal Simek
Fix Kconfig entry indentation for Aspeed ast2500 pin control driver. Fixes: 4f0e44e46615 ("aspeed: AST2500 Pinctrl Driver") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-04net: dwc_eth_qos: add Kconfig option to select supported configurationPatrick Delaunay
Add configuration flag to select the supported dwc driver configuration: - CONFIG_DWC_ETH_QOS_TEGRA186 - CONFIG_DWC_ETH_QOS_IMX - CONFIG_DWC_ETH_QOS_STM32 See Linux driver ethernet/stmicro/stmmac and associated glue layers for other configuration examples. This patch removes the not-selected compatibles and lets the linker remove the unused functions to reduce the size of the driver. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-08-04psci: put psci_method in .data section if EFI_LOADER is not enabledYann Gautier
Move the variable psci_method in .data section when EFI is not activated and the psci driver safely access it before relocation. Without this patch the variable is located in .bss section and the psci probe requested before relocation corrupts the device tree (probe is requested by board_f.c::print_resetinfo()). When EFI_LOADER is activated, this variable in already located in the .data.efi_runtime section by __efi_runtime_data. Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-08-04Fix corner case in bad block table handling.Doyle, Patrick
In the unlikely event that both blocks 10 and 11 are marked as bad (on a 32 bit machine), then the process of marking block 10 as bad stomps on cached entry for block 11. There are (of course) other examples. Signed-off-by: Patrick Doyle <pdoyle@irobot.com> Reviewed-by: Richard Weinberger <richard@nod.at>
2020-08-04Merge tag 'u-boot-imx-20200804' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx For 2020.10 ----------- - fixes for Toradex board - fix warnings from previous PR - HAB: reset instead of panic after failure - new board: MYiR Tech MYS-6ULX - mx6cuboxi: use OF_PLATDATA - further changes for DM Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/714513163
2020-08-04Merge tag 'fixes-for-2020.10-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - Fix tbs2910 vidconsole environment - Fix ipuv3 framebuffer output on i.MX6Q/D
2020-08-04Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- add DM based reset driver for SiFive SoC's.
2020-08-04Merge tag 'mips-pull-2020-08-03' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mips - doc: fix qemu-mips build instructions - MIPS: add GPIO, CLK and SPI drivers for Octeon MIPS64
2020-08-03net: Drop duplicate include of dm.h in pcnet.cSimon Glass
This file includes the header twice. Drop the second one. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03clk: Drop dm.h header file in clk-provider.hSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration and un-inlining of dev_get_clk_ptr() instead. Fix up the kendryte header files to avoid build errors. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2020-08-03usb: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Also move the inline function out into a C file. We should not include C code in headers. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03ufs: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Also drop asm/io.h Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03nand: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03adc: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Drop the common.h inclusion also. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03pci: Drop dm.h inclusion from header fileSimon Glass
The layerscape header should not include dm.h so remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03ti: am654: Drop duplicate dm.h inclusionSimon Glass
We only need to include this header once. Drop the duplicate. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03spi: Drop duplicate dm.h inclusionSimon Glass
We only need to include this header once. Drop the duplicate. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03mmc: Drop duplicate dm.h inclusionSimon Glass
We only need to include this header once. Drop the duplicate. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03power: Tidy up inclusion of regulator_common.hSimon Glass
This file should not include common.h and dm.h so remove them. Also move the inclusion of this file to after the normal includes. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-08-03fs: fs-loader: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03mtd: spi-mem: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03mtd: spi-nor: Tidy up error handling / debug codeSimon Glass
The -ENODEV error value in spi_nor_read_id() is incorrect since there clearly is a device - it just cannot be supported. Use -ENOMEDIUM instead which has the virtue of being less common. Fix the return value in spi_nor_scan(). Also there are a few printf() statements which should be debug() since they bloat the code with unused strings at present. Fix those while here. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03spi: Allow separate control of SPI_FLASH_TINY for SPL/TPLSimon Glass
In some cases SPL needs to be able to erase but TPL just needs to read. Allow these to have separate settings for SPI_FLASH_TINY. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04configs: reset: fu540: enable dm reset framework for SiFiveSagar Shrikant Kadam
Add necessary defconfig and Kconfig entries to enable SiFive SoC's reset driver so as to utilise U-Boot's reset framework. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-08-04sifive: reset: add DM based reset driver for SiFive SoC'sSagar Shrikant Kadam
PRCI module within SiFive SoC's has register with which we can reset the sub-systems within the SoC. The resets to DDR and ethernet sub systems within FU540-C000 SoC are active low, and are hold low by default on power-up. Currently these are directly asserted within prci driver via register read/write. With the DM based reset driver support here, we bind the reset driver with clock (prci) driver and assert the reset signals of both sub-system's appropriately. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-08-04fu540: prci: use common reset indexes defined in binding headerSagar Shrikant Kadam
Indexes of reset signals available in PRCI driver are also defined in include/dt-bindings/reset/sifive-fu540-prci.h. So use those instead of defining new ones again within the fu540-prci driver. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-08-03video: ipuv3: fix framebuffer base address init with multiple IPUsAnatolij Gustschin
Since commit 7812bbdc3732 ("video: Correctly handle multiple framebuffers") the vidconsole output is missing on the primary display on boards with two IPU units (all i.MX6Q/D based boards). The base address of the allocated framebuffer is not correctly programmed in the display controller. Fix it. Reported-by: Soeren Moch <smoch@web.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Tested-by: Soeren Moch <smoch@web.de>
2020-08-03drivers: spi: Add SPI controller driver for OcteonSuneel Garapati
Adds support for SPI controllers found on Octeon II/III and Octeon TX TX2 SoC platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-08-03clk: clk_octeon: Add simple MIPS Octeon clock driverStefan Roese
This patch adds a simple clock driver for the Marvell Octeon MIPS SoC family. Its for IO clock rate passing via DT in some of the Octeon driver, like I2C. So that we don't need to use the non-mainline API octeon_get_io_clock(). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Lukasz Majewski <lukma@denx.de>
2020-08-03gpio: octeon_gpio: Add GPIO controller driver for OcteonSuneel Garapati
Add support for GPIO controllers found on Octeon II/III and Octeon TX TX2 SoC platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-08-02drivers: rename more drivers to match compatible stringWalter Lozano
Continuing with the approach in commit <addf358bac1d2bd0> rename additional drivers to allow the OF_PLATDATA support. Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-02mmc: fsl_esdhc_imx: add CD support when OF_PLATDATA is enabledWalter Lozano
After enabling OF_PLATDATA support to both MMC and GPIO drivers add the support for card detection. Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-01-05 20:37:58 +0000