summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-06-18net: eepro100: Introduce device private dataMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Pass PCI BDF into bus_to_phys()/phys_to_bus()Marek Vasut
This is a trick in preparation for adding DM support. By passing in the PCI BDF into the bus_to_phys()/phys_to_bus() macros and calling that dev, we can substitute dev with udevice when DM support lands and do minor adjustment to the macros to support both DM and non-DM operation. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Drop inline keywordMarek Vasut
Drop the inline keyword from the static functions, the compiler has a much better overview and can decide how to inline those functions much better. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Fix EE_*_CMD macrosMarek Vasut
Those macros depended on specific variable names to be declared at their usage sites, fix this by adding an argument to those macros and also protect the argument with braces. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Factor out MII registrationMarek Vasut
Pull the MII registration code into a separate function. Moreover, properly free memory in case any of the registration or allocation functions fail, so this fixes an existing memleak. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Switch from malloc()+memset() to calloc()Marek Vasut
Replace malloc()+memset() combination with calloc(), no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Use PCI_DEVICE() to define PCI device compat listMarek Vasut
Use this macro to fully fill the PCI device ID table. This is mandatory for the DM PCI support, which checks all the fields. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Reorder functions in the driverMarek Vasut
Move the functions around in the driver to prepare it for DM conversion. Drop forward declarations which are not necessary anymore. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Remove volatile misuseMarek Vasut
Remove all the remaining use of the 'volatile' keyword, as this is no longer required. All the accesses which might have needed this use of 'volatile' have been repaired properly. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Add cache managementMarek Vasut
Add cache invalidation and flushes wherever the DMA descriptors are written or read, otherwise this driver cannot work reliably on any systems where caches are enabled. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Factor out tx_ring command issuingMarek Vasut
This code is replicated in the driver thrice almost verbatim, factor it out into a separate function and clean it up. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Replace purge_tx_ring() with memset()Marek Vasut
This function zeroes-out all the descriptors in the TX ring, use memset() instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Use standard I/O accessorsMarek Vasut
The current eepro100 driver accesses its memory mapped registers directly instead of using the standard I/O accessors. This can cause problems on some systems as the accesses can get out of order. So convert the direct volatile dereferences to use the normal in/out macros. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Fix camelcaseMarek Vasut
This is automated cleanup via checkpatch, no functional change. ./scripts/checkpatch.pl --show-types -f drivers/net/eepro100.c ./scripts/checkpatch.pl --types INDENTED_LABEL -f --fix --fix-inplace drivers/net/eepro100.c Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Fix remaining checkpatch issuesMarek Vasut
This is automated cleanup via checkpatch, no functional change. ./scripts/checkpatch.pl --show-types -f drivers/net/eepro100.c ./scripts/checkpatch.pl -f --fix --fix-inplace drivers/net/eepro100.c This fixes all the remaining errors except a couple of comments which are longer than 80 characters, all the volatile misuse and all the camelcase, that needs a separate patch. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Fix indented labelMarek Vasut
This is automated cleanup via checkpatch, no functional change. ./scripts/checkpatch.pl --show-types -f drivers/net/eepro100.c ./scripts/checkpatch.pl --types INDENTED_LABEL -f --fix --fix-inplace drivers/net/eepro100.c Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Fix pointer locationMarek Vasut
This is automated cleanup via checkpatch, no functional change. ./scripts/checkpatch.pl --show-types -f drivers/net/eepro100.c ./scripts/checkpatch.pl --types POINTER_LOCATION -f --fix --fix-inplace drivers/net/eepro100.c Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Fix parenthesis alignmentMarek Vasut
This is automated cleanup via checkpatch, no functional change. ./scripts/checkpatch.pl --show-types -f drivers/net/eepro100.c ./scripts/checkpatch.pl --types PARENTHESIS_ALIGNMENT -f --fix --fix-inplace drivers/net/eepro100.c Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Fix bracesMarek Vasut
This is automated cleanup via checkpatch, no functional change. ./scripts/checkpatch.pl --show-types -f drivers/net/eepro100.c ./scripts/checkpatch.pl --types BRACES -f --fix --fix-inplace drivers/net/eepro100.c Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Fix spacingMarek Vasut
This is automated cleanup via checkpatch, no functional change. ./scripts/checkpatch.pl --show-types -f drivers/net/eepro100.c ./scripts/checkpatch.pl --types SPACING -f --fix --fix-inplace drivers/net/eepro100.c Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Use plain debug()Marek Vasut
Convert all the ifdef DEBUG to plain debug(), no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Clean up commentsMarek Vasut
Clean the comments up to they trigger fewer checkpatch warnings, no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Remove EEPRO100_SROM_WRITEMarek Vasut
This code is never enabled, last board that used it was ELPPC which was removed some 5 years ago, so just remove this code altogether. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-13Merge tag 'dm-pull-12jun20' of git://git.denx.de/u-boot-dm into nextTom Rini
patman improvements to allow it to work with Zephyr change to how sequence numbers are assigned to devices minor fixes and improvements
2020-06-12net: rtl8139: Add DM supportMarek Vasut
Add support for driver model to the driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Read HW address from EEPROM only on probeMarek Vasut
Do not re-read the HW address from the EEPROM on every start of transfer, otherwise the user will not be able to adjust ethaddr as needed. Read the address only once, when the card is detected. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Use PCI_DEVICE() to define PCI device compat listMarek Vasut
Use this macro to fully fill the PCI device ID table. This is mandatory for the DM PCI support, which checks all the fields. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Split out common and non-DM functionsMarek Vasut
Split the driver into common and non-DM functionality, so that the DM support can later re-use the common code, while we retain the non-DM code until all the platforms are converted. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Pass private data into rtl8139_eeprom_delay()Marek Vasut
Instead of always calling rtl8139_eeprom_delay() with priv->ioaddr, call it with priv and let the function access priv->ioaddr. This reduces code duplication and has no impact, since the compiler will inline this as needed anyway. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Introduce device private dataMarek Vasut
Introduce rtl8139_pdata, which is a super-structure around eth_device and tracks per-device state, here the device IO address, PCI BDF, RX and TX ring position. Pass this structure around instead of the old non-DM eth_device in preparation for DM conversion. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Clean up bus_to_phys()/phys_to_bus() macrosMarek Vasut
These macros depended on the dev variable being declared wherever they were used. This is wrong and will not work with DM anyway, so pass only the PCI BFD into these macros, which fixes the dependency and prepares them for DM support as well. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Use dev->iobase instead of custom ioaddrMarek Vasut
Replace the use of custom static ioaddr variable with common dev->iobase, no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Switch from malloc()+memset() to calloc()Marek Vasut
Replace malloc()+memset() combination with calloc(), no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Factor out device name assignmentMarek Vasut
Pull the device name setting into a separate function, as this will be shared between DM/non-DM variants. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: phy: Add DP8382x phy registration to TI PHY initDan Murphy
Add the DP8382X generic PHY registration to the TI PHY init file. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Dan Murphy <dmurphy@ti.com>
2020-06-12net: phy: Add support for TI PHY initDan Murphy
ti_phy_init function was allocated to the DP83867 PHY. This function name is to generic for a specific PHY. The function can be moved to a TI specific file that can register all TI PHYs that are defined in the defconfig. The ti_phy_init file will contain all TI PHYs initialization so that only phy_ti_init can be called from the framework. In addition to the above the config flag for the DP83867 needs to be changed in the Kconfig and dependent defconfig files. The config flag that was used for the DP83867 was also generic in nature so a more specific config flag for the DP83867 was created. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Dan Murphy <dmurphy@ti.com>
2020-06-12net: phy: add phyid search in vendor specific spaceFlorin Chiculita
There are devices accesible through mdio clause-45, such as retimers, that do not have PMA or PCS blocks. This patch adds MDIO_MMD_VEND1 on the list of device addresses where phyid is searched. Previous order of devices was kept. Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com> Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
2020-06-12net: rt8169: WAR for DHCP not getting IP after kernel boot/rebootTom Warren
This is a WAR for DHCP failure after rebooting from the L4T kernel. The r8169.c kernel driver is setting bit 19 of the rt816x HW register 0xF0, which goes by FuncEvent and MISC in various driver source/datasheets. That bit is called RxDv_Gated_En in the r8169.c kernel driver. Clear it here at the end of probe to ensure that U-Boot can get an IP assigned via DHCP. Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-06-12net: phy: micrel: ksz8061 implement errata 80000688A fixBryan O'Donoghue
Linux commit 232ba3a51cc2 ('net: phy: Micrel KSZ8061: link failure after cable connect') implements a fix for the above errata. This patch replicates that errata fix in an ksz8061 specific init routine. Signed-off-by: Bryan O'Donoghue <bod@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-06-11dm: uclass: don't assign aliased seq numbersMichael Walle
If there are aliases for an uclass, set the base for the "dynamically" allocated numbers next to the highest alias. Please note, that this might lead to holes in the sequences, depending on the device tree. For example if there is only an alias "ethernet1", the next device seq number would be 2. In particular this fixes a problem with boards which are using ethernet aliases but also might have network add-in cards like the E1000. If the board is started with the add-in card and depending on the order of the drivers, the E1000 might occupy the first ethernet device and mess up all the hardware addresses, because the devices are now shifted by one. Also adapt the test cases to the new handling and add test cases checking the holes in the seq numbers. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Alex Marginean <alexandru.marginean@nxp.com> Tested-by: Alex Marginean <alexandru.marginean@nxp.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Michal Simek <michal.simek@xilinx.com> [on zcu102-revA]
2020-06-11usb: provide a device tree node to USB devicesMichael Walle
It is possible to specify a device tree node for an USB device. This is useful if you have a static USB setup and want to use aliases which point to these nodes, like on the Raspberry Pi. The nodes are matched against their hub port number, the compatible strings are not matched for now. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-11regmap: Check for out-of-range offsets before mapping themPratyush Yadav
In regmap_raw_{read,write}_range(), offsets are checked to make sure they aren't out of range. But this check happens _after_ the address is mapped from physical memory. Input should be sanity-checked before using it. Mapping the address before validating it leaves the door open to passing an invalid address to map_physmem(). So check for out of range offsets _before_ mapping them. This fixes a segmentation fault in sandbox when -1 is used as an offset to regmap_{read,write}(). Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
2020-06-09Merge tag 'u-boot-imx-20200609' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2020.07 ----------------- - mx53: mx53menlo Convert to DM_ETH, fix fail boot - imx8mp_evk: fix boot issue - MX6, display5: fix environment - drop warnings (watchdog) for i.MX8mm i.mx8mp - enable bootaux for i.MX8M Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/695929999
2020-06-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
- DM_ETH support for P2041RDB, T1024RDB, P5040DS, P3041DS, P4080DS, bug fixes - Add TBI PHY access through MII - DDR: Rework errata workaround for A008109, A008378, 009942
2020-06-08power: pmic: Add SPL Kconfig entry for PFUZE100Marek Vasut
Add Kconfig entry for the PFUZE PMIC, SPL variant. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-06-05virtio: VIRTIO_RNG depends on DM_RNGHeinrich Schuchardt
Add the missing Kconfig dependency and let VIRTIO_RNG default to yes. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-04serial: Add missing Kconfig dependencies for debug consolesMichal Simek
Debug console is the part of serial driver in the same file. It means to be able to enable debug console you also need to enable driver itself. That's why add all dependecies and list only debug consoles which are enabled based on driver selection to avoid compilation error when user asks for certain debug console but driver is not enable for it. Error: aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc': /home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to `printch' aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `puts': /home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Fix ns16550 dependency, add ZYNQ_SERIAL, change S5P] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-04serial: Convert ARM_DCC to KconfigTom Rini
The symbol "CONFIG_ARM_DCC" is used to control building drivers/serial/arm_dcc.c. Provide a simple Kconfig entry for this. Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Tom McLeod <tom.mcleod@opalkelly.com> Cc: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2020-06-04ddr: Rework errata A008109, A008378, 009942 workaroundJaiprakash Singh
Move errata A008109, A008378, 009942 workaround implementation from compute_fsl_memctl_config_regs() to fsl_ddr_set_memctl_regs() and add register write after each workaround implementation. Signed-off-by: Jaiprakash Singh <Jaiprakash.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04ddr: fsl: Impl. Erratum A008109Joakim Tjernlund
Impl. erratum as descibed in errata doc. Enable A008109 for T1040 and T1024 Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit (git 2.34.1) at 2025-01-23 02:00:11 +0000