summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-12-13cfi_flash: Reorder functions and eliminate extra prototypesHaavard Skinnemoen
Reorder the functions in cfi_flash.c so that each function only uses functions that have been defined before it. This allows the static prototype declarations near the top to be eliminated and might allow gcc to do a better job inlining functions. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13cfi_flash: Make some needlessly global functions staticHaavard Skinnemoen
Make functions not declared in any header file static. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13cfi_flash: Break long linesHaavard Skinnemoen
This patch tries to keep all lines in the cfi_flash driver below 80 columns. There are a few lines left which don't fit this requirement because I couldn't find any trivial way to break them (i.e. it would take some restructuring, which I intend to do in a later patch.) Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13CFI: synchronize command offsets with Linux CFI driverBartlomiej Sieka
Fixes non-working CFI Flash on the Inka4x0 board. Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-12-08CFI: Coding style cleanupStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-08CFI: support JEDEC flash roms in CFI-flash frameworkMichael Schwingen
The following patch adds support for non-CFI flash ROMS, by hooking into the CFI flash code and using most of its code, as recently discussed here in the thread "Mixing CFI and non-CFI flashs". Signed-off-by: Michael Schwingen <michael@schwingen.org> Signed-off-by: Stefan Roese <sr@denx.de>
2007-11-25drivers/mtd : move mtd drivers to drivers/mtdJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25drivers/misc : move misc drivers to drivers/miscJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25drivers/block : move block drivers to drivers/blockJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25drivers/rtc : move rtc drivers to drivers/rtcJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25drivers/hwmon : move hardware monitor drviers to drivers/hwmonJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25drivers/input : move input drivers to drivers/inputJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25drivers/usb : move usb drivers to drivers/usbJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25drivers/serial : move serial drivers to drivers/serialJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25drivers/net : move net drivers to drivers/netJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25drivers/video : move video drivers to drivers/videoJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-24drivers/pcmcia : move pcmcia drivers to drivers/pcmciaJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-24drivers/pci : move pci drivers to drivers/pciJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-20drivers/i2c : move i2c drivers to drivers/i2cJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-20Merge branch 'origin' into kconfig-for-1.3.1Grant Likely
2007-11-19Fix build problems with mp2usb boardWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-11-18Fix compiler warnings for ARM systems.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-11-18Fix compiler warnings for PPC systems. Update CHANGELOG.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-11-16Merge branch 'origin' into kconfig-for-1.3.1Grant Likely
Conflicts: drivers/Makefile
2007-11-15Group PCI and PCMCIA drivers in drivers/MakefileGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15Group block/flash drivers in drivers/MakefileGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15Group USB drivers in drivers/MakefileGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15Group i2c drivers in drivers/MakefileGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15Group console drivers in drivers/MakefileGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15Group network drivers in drivers/MakefileGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15Build: split COBJS value into multiple linesGrant Likely
This change is in preparation for condtitionial compile support in the build system. By spliting them all into seperate lines now, subsequent patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will be less invasive and easier to review Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-06Implement general ULi 526x Ethernet driver support in U-bootRoy Zang
This patch implements general ULi 526x Ethernet driver. Until now, it is the only native Ethernet port on MPC8610HPCD board, but it could be used on other boards with ULi 526x Ethernet port as well. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Ben Warren <bwarren@qstreams.com>
2007-11-03Trimmed some variables in ne2000.cVlad Lungu
Signed-off-by: Vlad Lungu <vlad@comsys.ro>
2007-11-02Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2007-11-01Merge branch 'master' of git://www.denx.de/git/u-boot-armWolfgang Denk
2007-11-01Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2007-10-24fsl_pci_init enable COMMAND_MEMORY if inbound windowEd Swarthout
Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows to pciauto_setup_device has the side effect of not getting COMMAND_MEMORY set. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2007-10-23Coding style: keep lists sorted; update CHANGELOGWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-10-23Fix missing drivers makefile entries ds1722.c mw_eeprom.cJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-10-23Move PL01* serial drivers to drivers/serial and adjust Makefiles.Peter Pearse
2007-10-21Minor coding style cleanup; update CHANGELOGWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-10-21Fix NE2000 driver:Vlad Lungu
Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try to do anything in eth_stop() if eth_init() was not called. Simplified RX path in order to avoid timeouts on really really fast NE2000 cards (read: qemu with internal tftp), NetLoop() is clever enough to cope with 1 packet per eth_rx(). Signed-off-by: Vlad Lungu <vlad@comsys.ro>
2007-10-19tsec driver should clear RHALT on startupDan Wilson
This was causing problems for some people. Signed-off-by: Alain Gravel <agravel@fulcrummicro.com> Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-10-15Merge branch 'master' of git://www.denx.de/git/u-boot-usbWolfgang Denk
2007-10-13Merge branch 'merge' of git://www.denx.de/git/u-boot-microblazeWolfgang Denk
2007-10-13Merge branch 'master' of git://www.denx.de/git/u-boot-nand-flashWolfgang Denk
2007-10-13Coding Style cleanup.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-10-04Merge with git://www.denx.de/git/u-boot.gitPeter Pearse
2007-10-02Bugfix: Use only one PTD for one endpointTimo Ketola
Original isp116x-hcd code prepared multiple PTDs for longer than 16 byte transfers for one endpoint. That is unnecessary because the ISP116x is able to split long data from one PTD into multiple transactions based on the buffer size of the endpoint. It also caused serious problems if the endpoint NAKed some of the transactions. In that case ISP116x wouldn't notice that the other PTDs were for the same endpoint and would try the other PTDs possibly out of order. That would break the whole transfer. This patch makes isp116x_submit_job to use one PTD for one transfer. Signed-off-by: Timo Ketola <timo.ketola@exertus.fi> Signed-off-by: Markus Klotzbuecher <mk@denx.de>
2007-09-24[PATCH] Change macro name for UartLiteMichal Simek
because PowerPC 405 can use UartLite as console
generated by cgit (git 2.34.1) at 2025-01-05 02:24:02 +0000