summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-05-08pinctrl: rockchip: Also move common set_schmitter func into per Soc fileDavid Wu
Only some Soc need Schmitter feature, so move the implementation into their own files. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08pinctrl: rockchip: Clean the unused type and labelDavid Wu
As the mux/pull/drive feature implement at own file, the type and label are not necessary. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08pinctrl: rockchip: Special treatment for RK3288 gpio0 pins' pullDavid Wu
RK3288 pmu_gpio0 pull setting have no higher 16 writing corresponding bits, need to read before write the register. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08pinctrl: rockchip: Split the common set_pull() func into per SocDavid Wu
As the common set_mux func(), implement the feature at the own file for each Soc. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08pinctrl: rockchip: Special treatment for RK3288 gpio0 pins' drive strengthDavid Wu
RK3288 pmu_gpio0 drive strength setting have no higher 16 writing corresponding bits, need to read before write the register. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08pinctrl: rockchip: Split the common set_drive() func into per SocDavid Wu
As the common set_mux func(), implement the feature at the own file for each Soc. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08pinctrl: rockchip: Special treatment for RK3288 gpio0 pins' iomuxDavid Wu
RK3288 pmu_gpio0 iomux setting have no higher 16 writing corresponding bits, need to read before write the register. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08pinctrl: rockchip: Split the common set_mux() into per SocDavid Wu
Such as rk3288's pins of pmu_gpio0 are a special feature, which have no higher 16 writing corresponding bits, use common set_mux() func would introduce more code, so implement their set_mux() in each Soc's own file to reduce the size of code. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08pinctrl: rockchip: Remove redundant spacesDavid Wu
Some files have the redundant spaces, remove them. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08pinctrl: rockchip: Add pull-pin-default param and remove unused paramDavid Wu
Some Socs use the pull-pin-default config param, need to add it. And input-enable/disable config params are not necessary, remove it. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08Revert "pinctrl: rockchip: Add 32bit writing function for rk3288 gpio0 pinctrl"Kever Yang
This reverts commit 502980914b2d6f9ee85a823aa3ef9ead76c0b7f2. This is a superseded version, revert this to apply new patch set. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08rockchip: ram: rk3399: update for TPLKever Yang
Init the ddr sdram in TPL instead of SPL, update the code. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Andy Yan <andy.yan@rock-chips.com>
2019-05-08rockchip: dmc: rk3368: update rank number for evb-px5Kever Yang
evb-px5 has only 1 CS, update for it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Andy Yan <andy.yan@rock-chips.com>
2019-05-08sysreset: enable driver support in SPL/TPLKever Yang
SPL/TPL also need use sysreset for some feature like panic callback. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08rockchip: clk: rk322x: fix assert clock valueKever Yang
BUS_PCLK_HZ and BUS_HCLK_HZ are from BUS_ACLK_HZ, not from GPLL_HZ. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08rockchip: rk322x: add CLK_EMMC_SAMPLE clock supportKever Yang
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08Revert "rockchip: rk322x: ram: enable DRAM init in SPL instead of TPL"Kever Yang
This reverts commit f338cca1d2bce906b049722d2fdbf527a4963b61. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-07Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- RZ/A1 addition. - Old board removal.
2019-05-07Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- Assorted stratix10 fixes. - DDR driver DM migration.
2019-05-07spi: rpc: Add support for operation without clock frameworkMarek Vasut
Add ifdeffery to allow operation without the clock framework enabled. This is required on RZ/A1, as it does not have clock driver yet. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07net: sh_eth: Add support for operation without clock frameworkMarek Vasut
Add ifdeffery to allow operation without the clock framework enabled. This is required on RZ/A1, as it does not have clock driver yet. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07net: sh_eth: Add RZ/A1 supportMarek Vasut
Add support for RZ/A1 SoC specifics. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07serial: sh: Add RZ/A1 supportMarek Vasut
Add support for RZ/A1 SoC specifics. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07timer: renesas: Add RZ/A1 R7S72100 OSTM timer driverMarek Vasut
Add OSTM timer driver for RZ/A1 SoC. The IP is very different from the R-Car Gen2/Gen3 one already present in the tree, hence a custom driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07pinctrl: renesas: Add RZ/A1 R7S72100 pin control driverMarek Vasut
Add pin control driver for RZ/A1 SoC. The IP is very different from the R-Car Gen2/Gen3 one already present in the tree, hence a custom driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07gpio: renesas: Add RZ/A1 R7S72100 GPIO driverMarek Vasut
Add GPIO driver for RZ/A1 SoC. The IP is very different from the R-Car Gen2/Gen3 one already present in the tree, hence a custom driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07sh: 7785: Remove CPU supportMarek Vasut
There are no more boards using this CPU and there is no prospect of any boards showing up soon, remove it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2019-05-07sh: 7724: Remove CPU supportMarek Vasut
There are no more boards using this CPU and there is no prospect of any boards showing up soon, remove it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2019-05-06Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Various pinctrl / gpio fixes for R-Car
2019-05-06Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
- Important spi-mem fix
2019-05-06arm: socfpga: Move Stratix 10 SDRAM driver to DMLey Foon Tan
Convert Stratix 10 SDRAM driver to device model. Get rid of call to socfpga_per_reset() and use reset framework. SPL is changed from calling function in SDRAM driver directly to just probing UCLASS_RAM. Move sdram_s10.h from arch to driver/ddr/altera directory. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-05-06ddr: altera: Compile ALTERA SDRAM in SPL onlyLey Foon Tan
Compile ALTERA_SDRAM driver in SPL only. Rename ALTERA_SDRAM to SPL_ALTERA_SDRAM. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-05-05usb: ohci: ohci-da8xx: Enable da850-ohci driver with DM supportAdam Ford
This patch reuses some former code for the hawkboard, combines it with some some similar DM_USB compatible code for the OHCI driver, and enables the use of the da850's OHCI controller with DM_USB compatibility. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-05dm: cache: add the pl310 cache controller driverDinh Nguyen
Add a PL310 cache controller driver that is usually found on ARMv7(32-bit) devices. The driver configures the cache settings that can be found in the device tree files. This initial revision only configures basic settings(data & instruction prefetch, shared-override, data & tag latency). I believe these are the settings that affect performance the most. Comprehensive settings can be done by the OS. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-05-05dm: cache: Create a uclass for cacheDinh Nguyen
The cache UCLASS will be used for configure settings that can be found in a CPU's L2 cache controller. Add a uclass and a test for cache. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-05-04Merge tag 'mips-pull-2019-05-03' of git://git.denx.de/u-boot-mipsTom Rini
- mscc: small fixes, enhance network support for Serval, Luton and Ocelot - mt7620: rename arch to more generic name mtmips - mips: pass initrd addresses via DT as physical addresses
2019-05-04Merge tag 'mmc-2019-5-3' of https://github.com/MrVan/u-bootTom Rini
2019-05-04net: ravb: Avoid unsupported internal delay mode for R-Car E3/D3Marek Vasut
According to the R-Car Gen3 Hardware Manual Rev 1.50 of Nov 30, 2018, the TX clock internal delay mode isn't supported on R-Car E3 (r8a77990) or D3 (r8a77995). Avoid setting the APSR:TDM bit on these SoCs. Moreover, only set APSR:TDM when the DT explicitly specifies RGMII ID or TXID mode instead of setting it unconditionally when the PHY link speed is 1000 Mbit/s. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@ni.com>
2019-05-04pinctrl: renesas: Remove sh_pfc_config_mux_for_gpio()Marek Vasut
This function is now replaced by common pin controller GPIO configuration functionality, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: Christoph Muellner <christoph.muellner@theobroma-systems.com> Cc: Eugeniu Rosca <roscaeugeniu@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick DELAUNAY <patrick.delaunay@st.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Simon Glass <sjg@chromium.org>
2019-05-04gpio: renesas: Migrate to pinctrl GPIO accessorsMarek Vasut
Switch to generic pin controller API for configuring pins as GPIOs instead of using the ad-hoc call into the R-Car PFC driver. Moreover, add .free() implementation for the GPIO controller. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: Christoph Muellner <christoph.muellner@theobroma-systems.com> Cc: Eugeniu Rosca <roscaeugeniu@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick DELAUNAY <patrick.delaunay@st.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Simon Glass <sjg@chromium.org>
2019-05-04pinctrl: renesas: Implement gpio_request_enable/gpio_disable_freeMarek Vasut
Implement the gpio_request_enable/gpio_disable_free callbacks to let the GPIO driver call the pin control framework and let it reconfigure pins as GPIOs. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: Christoph Muellner <christoph.muellner@theobroma-systems.com> Cc: Eugeniu Rosca <roscaeugeniu@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick DELAUNAY <patrick.delaunay@st.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Simon Glass <sjg@chromium.org>
2019-05-04pinctrl: renesas: Set pin type in sh_pfc_config_mux_for_gpioMarek Vasut
Add missing cfg->type = PINMUX_TYPE_GPIO upon successfully setting pin as a GPIO to retain the pin configuration information. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: Christoph Muellner <christoph.muellner@theobroma-systems.com> Cc: Eugeniu Rosca <roscaeugeniu@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick DELAUNAY <patrick.delaunay@st.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Simon Glass <sjg@chromium.org>
2019-05-04pinctrl: gpio: Add callback for configuring pin as GPIOMarek Vasut
Add callback to configure, and de-configure, pin as a GPIO on the pin controller side. This matches similar functionality in Linux and aims to replace the ad-hoc implementations present in U-Boot. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: Christoph Muellner <christoph.muellner@theobroma-systems.com> Cc: Eugeniu Rosca <roscaeugeniu@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick DELAUNAY <patrick.delaunay@st.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Simon Glass <sjg@chromium.org>
2019-05-04Convert CONFIG_SUPPORT_EMMC_BOOT to KconfigAlex Kiernan
This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT As requested by Michal Simek <michal.simek@xilinx.com>, these boards have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated: xilinx_zynqmp_zc1275_revB xilinx_zynqmp_zc1751_xm018_dc4 xilinx_zynqmp_zc1751_xm019_dc5 xilinx_zynqmp_zcu100_revC xilinx_zynqmp_zcu102_rev1_0 xilinx_zynqmp_zcu102_revA xilinx_zynqmp_zcu102_revB xilinx_zynqmp_zcu104_revA xilinx_zynqmp_zcu104_revC xilinx_zynqmp_zcu106_revA xilinx_zynqmp_zcu111_revA Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-05-04usb: musb_hcd: remove unnecessary ifdefs for dm* SoCsBartosz Golaszewski
The support for DaVinci DM* SoCs has been dropped. The ifdefs in the musb_hcd driver are no longer needed. Remove them. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Marek Vasut <marex@denx.de>
2019-05-04nand: davinci: remove dead code for dm644xBartosz Golaszewski
The support for DaVinci DM* SoCs has been dropped. The code that used to be relevant to dm644x is no longer needed. Remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-04net: davinci_emac: drop support for unused PHYsBartosz Golaszewski
The boards with SoCs from the DaVinci DM* family used to come with different PHYs that needed special support implemented in mach-davinci. Since the support for these chips has long been removed, we can now drop this unnused code from the emac driver. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-03Merge git://git.denx.de/u-boot-socfpgaTom Rini
- Misc MMC, FPGA bridge, general SoCFPGA fixes
2019-05-03Merge git://git.denx.de/u-boot-usbTom Rini
- DaVinci updates
2019-05-03Merge git://git.denx.de/u-boot-marvellTom Rini
- Fix in kwbimage (return code checking) (Young Xiao) - Misc updates to Turris Omnia (Marek)
generated by cgit (git 2.34.1) at 2025-02-26 06:40:29 +0000