summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-10-08imx: scu_api: add sc_rm_set_master_sidPeng Fan
Add sc_rm_set_master_sid to set stream sid of masters to make sure they could use smmu. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08misc: Kconfig: make i.MX7ULP could use MXC_OCOTPPeng Fan
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08serial: Kconfig: make MXC_UART usable for MX7 and IMX8MPeng Fan
i.MX7 and i.MX8M use mxc uart driver, so let's make the SoC could use MXC_UART kconfig. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com>
2019-10-08pinctrl: imx: use devfdt_get_addr_size_indexPeng Fan
fdtdec_get_addr_size could not parse addr/size correctly is using address-cells 2 and size-cells 2 on an ARM32 SoC. So switch to use devfdt_get_addr_size_index. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08arm64: zynqmp: Use mailbox driver for PMUFW config loadingMichal Simek
With new mailbox driver PMUFW configuration object can be loaded via the same interface and there is no need to have pmu_ipc.c completely. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2019-10-08firmware: zynqmp: Separate function for sending message via mailboxMichal Simek
U-Boot running in EL3 can't use SMC that's why there is a need to talk to PMUFW directly via mailbox. The same logic is applied to all functions which need to talk to PMUFW that's why move this logic to separate function to avoid code duplication. Also SMC request ID can be composed from PM_SIP_SVC offset that's why ZYNQMP_SIP_SVC_GET_API_VERSION macro can be removed completely. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: use firmware driver to get versionIbai Erkiaga
Use the new function from firmware version to get the firmware version. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08firmware: zynqmp: create firmware headerIbai Erkiaga
New firmware header to place firmware specific macro and function declarations. The patch also moves the macros defining PM operations as well as some helper macros. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08firmware: zynqmp: get fw version with mailbox driverIbai Erkiaga
Implements the function to get PMU Firmware version using the mailbox driver or smc call based on if running SPL or not. Additionally gets version as part of the ZynqMP Firmware driver probing Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08firmware: zynqmp: Add zynqmp-power supportIbai Erkiaga
zynqmp-power driver for ZynqMP to handle the communication with the PMU firmware. Firmware driver just probes subnodes and power driver handles communication with PMU using the IPI mailbox driver. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08mailbox: zynqmp: ipi mailbox driverIbai Erkiaga
ZynqMP mailbox driver implementing IPI communication with PMU. This would allow U-Boot SPL to communicate with PMUFW to request privileged operations. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08mailbox: allow subnode for mbox regsIbai Erkiaga
The following patch allows the mailbox node in DT to host subnodes with mailbox definitions. If the client phandle to the mailbox is not the mailbox driver node, just checks parents as well. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08mailbox: check ops prior callingIbai Erkiaga
Check if request and free operations are present prior calling to the functions. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08net: xilinx_axiemac: Fill the phy node pointer in phydevSiva Durga Prasad Paladugu
This patch assings the phynode pointer to the phydev node as it is needed later in the corresponding phy driver to read phy properties from DT. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08gpio: zynq: fix issue in set gpio output directionAshok Reddy Soma
This patch fixes zynq_gpio_direction() to call driver specific zynq_gpio_set_value function rather than top level gpio_set_value. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08drivers: usb: dwc3: setup phy before dwc3 core soft resetT Karthik Reddy
Phy setup should be done before dwc3 soft core reset as it is done in linux & this fixes unreliable detection of usb cable on host side. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08mmc: zynq_sdhci: Remove check for DM_MMC configSiva Durga Prasad Paladugu
The zynq_sdhci drivers depends on DM_MMC in Kconfig so no need to check for DM_MMC in the driver so this patch removes it. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08net: phy: Add gmiitorgmii converter supportSiva Durga Prasad Paladugu
This patch adds support for gmiitorgmii converter. This converter sits between the MAC and the external phy MAC <==> GMII2RGMII <==> RGMII_PHY. The ethernet driver probes this bridge and this bridge driver probes real phy driver and invokes the real phy functionalities as requested. This bridge just needs to be configured based on real phy negotiated speed and duplex. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08net: phy: Define init routine and register generic phy driverSiva Durga Prasad Paladugu
This patch define init routine for generic phy driver and registers it using phy_register as this generic phy driver also needs to be relocated incase of manual reloc. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08fpga: zynqmp: Fix second local variable declarationMichal Simek
No reason to define new_buf again. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08mmc: sdhci: Move ZYNQ_HISPD_BROKEN to KconfigSiva Durga Prasad Paladugu
This patch moves CONFIG_ZYNQ_HISPD_BROKEN to Kconfig Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08net: zynq_gem: Remove check for VersalSiva Durga Prasad Paladugu
This patch removes check for Versal platform in gem driver as it now supports clock setting through clock framework. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08clk: versal: Add clock driver supportSiva Durga Prasad Paladugu
This patch adds clock driver support for Versal platform. The clock driver queries and performs clock operations using PLM firmware by communicating with it using SMC calls. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08net: zynq_gem: Add new versal compatible stringSiva Durga Prasad Paladugu
This patch adds new versal compatible string to GEM driver for Versal platform. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08net: gem: Remove DECLARE_GLOBAL_DATA_PTR from gem driverMichal Simek
GD is not used anywhere that's why there is no reason to have this macro in the driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08zynqmp: firmware: Add Xilinx ZynqMP firmware driverRajan Vaja
Add simple ZynqMP firmware drive to populate child nodes under zynqmp_firmware DT node. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: versal: fpga: Add PL bit stream load supportSiva Durga Prasad Paladugu
This patch adds PL bitstream load support for Versal platform. The PL bitstream is loaded by making an SMC to ATF which in turn communicates with platform firmware which configures and loads PL bitstream on to PL. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: at91: Rename sama5_sfr.h to at91_sfr.hTudor Ambarus
The Special Function Registers (SFR) are present in sam9x5 and sam9x60 too, rename sama5_sfr to at91_sfr.h. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08mmc: atmel_sdhci: Add sam9x60-sdhci compatibility stringSandeep Sheriker Mallikarjun
Add new compatibility string for matching sam9x60 product. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2019-10-08net: macb: Add sam9x60-macb compatibility stringNicolas Ferre
Add this new compatibility string for matching sam9x60 product macb. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2019-10-08x86: Allow the PCH and LPC uclasses to work with of-platdataSimon Glass
At present these uclasses assumes that they are used with a device tree. Update them to support of-platdata as well. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08sandbox: pci: Create a new sandbox_pci_read_bar() functionSimon Glass
The code in swapcase can be used by other sandbox drivers. Move it into a common place to allow this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: remove inclusion of <asm/test.h> in pci_sandbox.c] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08dm: core: Drop fdtdec_get_pci_addr()Simon Glass
This function ise effectively replaced by ofnode_read_pci_addr() which works with flat tree. Delete it to avoid code duplication. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: pci: Drop the first parameter in pci_x86_r/w_config()Simon Glass
This parameter is needed by the PCI driver-mode interface but is always NULL on x86. There are a number of calls to this function so it makes sense to minimise the parameters. Adjust the x86 function to omit the first parameter, and introduce stub functions to handle the conversion. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: rebase the patch against u-boot-x86/next to get it applied cleanly] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Move acpi_s3.h to a common locationSimon Glass
At present this hedaer is only available on x86. To allow sandbox to use it for testing, move it to a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08spl: Allow tiny printf() to be controlled in SPL and TPLSimon Glass
At present there is only one control for this and it is used for both SPL and TPL. But SPL might have a lot more space than TPL so the extra cost of a full printf() might be acceptable. Split the option into two, providing separate SPL and TPL controls. The TPL setting defaults to the same as SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08dm: pci: Add a function to read a PCI BARSimon Glass
At present PCI address transaction is not supported so drivers must manually read the correct BAR after reading the device tree info. The ns16550 has a suitable implementation, so move this code into the core DM support. Note that there is no live-tree equivalent at present. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: correct the unclear comments in test.dts] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08pci: Show a message if PCI autoconfig failsSimon Glass
At present this fails silently which can be confusing since some devices on the PCI bus may not work correctly. Show a message in this case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: add a '\n' in the PCI autoconfig fail message] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08pci: Add more debug detail when resources are exhaustedSimon Glass
If PCI auto-config runs out of memory, show a few more details to help diagnose the problem. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: change %x to %llx to avoid build warnings on some platforms] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08pci: Disable autoconfig in SPLSimon Glass
At present U-Boot runs autoconfig in SPL but this is best left to U-Boot proper. For TPL and SPL we can normally used fixed BARs and save code size and time. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08pci: Show the result of binding a deviceSimon Glass
Update the debugging info a little to show the result of trying to bind a PCI device. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08pci: sandbox: Probe PCI emulation devices when usedSimon Glass
At present PCI emulation devices are not probed before use, since they used to be children of the device that used them, and children cannot be probed before their parents. Now that PCI emulation devices are attached to the root node, we can simply probe them, and avoid using the internal function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: rebase the patch against u-boot-x86/next to get it applied cleanly] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08pci: sandbox: Move the emulators into their own nodeSimon Glass
Sandbox pci works using emulation drivers which are currently children of the pci device: pci-controller { pci@1f,0 { compatible = "pci-generic"; reg = <0xf800 0 0 0 0>; emul@1f,0 { compatible = "sandbox,swap-case"; }; }; }; In this case the emulation device is attached to pci device on address f800 (device 1f, function 0) and provides the swap-case functionality. However this is not ideal, since every device on a PCI bus has a child device. This is only really the case for sandbox, but we want to avoid special-case code for sandbox. Worse, child devices cannot be probed before their parents. This forces us to use 'find' rather than 'get' to obtain the emulator device. In fact the emulator devices are never probed. There is code in sandbox_pci_emul_post_probe() which tries to track when emulators are active, but at present this does not work. A better approach seems to be to add a separate node elsewhere in the device tree, an 'emulation parent'. This could be given a bogus address (such as -1) to hide the emulators away from the 'pci' command, but it seems better to keep it at the root node to avoid such hacks. Then we can use a phandle to point from the device to the correct emulator, and only on sandbox. The code to find an emulator does not interfere with normal pci operation. Add a new UCLASS_PCI_EMUL_PARENT uclass which allows finding an emulator given a bus, and finding a bus given an emulator. Update the existing device trees and the code for finding an emulator. This brings PCI emulators more into line with I2C. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fix 3 typos in the commit message; encode bus number in the labels of swap_case_emul nodes; mention commit 4345998ae9df in sandbox_pci_get_emul()] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08sandbox: pci: Move pci_offset_to_barnum() to pci.hSimon Glass
This function is useful in PCI emulators. More it into the header file to avoid duplicating it in other drivers. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08sandbox: pci: Drop the get_devfn() methodSimon Glass
This method is not used anymore since the bus/device/function of PCI devices can be obtained from their (parent's per-child) platform data. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08sandbox: swap_case: Use statics where possibleSimon Glass
Some functions and a struct should be marked static since they are not used outside this file. Update them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08sandbox: Rename PCI ID for swap_case to be more specificSimon Glass
Rename this ID to SANDBOX_PCI_SWAP_CASE_EMUL_ID since it is more descriptive and allows us to add new PCI emulators without any conflict or confusion. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08sandbox: mmc: Fix up MMC emulator for valgrindSimon Glass
At present running sandbox with valgrind produces some warnings due to the MMC emulator not filling in all the expected fields. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: use sizeof() instead of hardcoded 16] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08sandbox: spmi: Add ranges property for address translationSimon Glass
At present address translation does not work since there is no ranges property in the spmi nodes. Add empty ranges properties and a little more logging so that this shows the error: /tmp/b/sandbox/u-boot -d /tmp/b/sandbox/arch/sandbox/dts/test.dtb \ -c "ut dm spmi_access_peripheral" -L7 -v ... pm8916_gpio_probe() bad address: returning err=-22 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08dm: core: Add device_foreach_child()Simon Glass
We have a 'safe' version of this function but sometimes it is not needed. Add a normal version too and update a few places that can use it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-27 06:35:58 +0000