summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-08-24clk: mt7622: add needed clocks for ssusb-nodeFrank Wunderlich
MT7622 needs additional clock definitions to work properly Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2020-08-24ahci: mediatek: fix copyright and author-linesFrank Wunderlich
after review of sam copyright should be on one line and link should not between author lines just remove the link and put ryder first as he is author of linux-driver Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2020-08-24reset: drop unnecessary comment for pciesysFrank Wunderlich
after review from sam this comment should be removed Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2020-08-24phy: mtk-tphy: make shared reg optional for v1Frank Wunderlich
make the shared reg optional when version is v1 for sata Suggested-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
2020-08-24virtio_blk: set log2blksz correctlyAKASHI Takahiro
'log2blksz' in blk_desc structure must always be initialized, otherwise it will cause a lot of weird failures in file operations. For example, fs_set_blk_dev[_with_part]() examines a block device against every file system with its probe function. In particular, ext4 file system's ext4_probe() will calls fs_devread() to fetch a super block. If log2blksz is 0, the actual 'read' size, i.e. block_len >> log2blksz, is much bigger than a buffer's size, and it can end up with memory corruption. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Fixes: f4802209e59d ("virtio: Add block driver support") Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-08-24firmware: psci: Do not bind driver if U-Boot runs in EL3Michal Simek
There is no reason to bind psci driver if U-Boot runs in EL3 because SMC/HVC instructions can't be called. That's why detect this state and don't let user to crash from prompt by performing reset or poweroff commands (if enabled). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-24Merge tag 'u-boot-clk-24Aug2020' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-clk - Add CCF clocks definitions for iMX6Q enet (ETH) - Several fixes for CCF framework - the most notable is the one, which adds get_rate helper to clk-mux.c - Improvements for clk command - better visibility and alignment.
2020-08-24clk: ccf: Add missing #include <dm/uclass.h> to clk-mux.cLukasz Majewski
After adding custom get_rate helper function it was necessary to include <dm/uclass.h> to avoid warnings about missing uclass_get_device_by_name. Signed-off-by: Lukasz Majewski <lukma@denx.de> Series-to: u-boot
2020-08-24clk: ccf: mux: change the get_rate helperDario Binacchi
The previous version of the get_rate helper does not work if the mux clock parent is changed after the probe. This error has not been detected because this condition has not been tested. The error occurs because the set_parent helper does not change the parent of the clock device but only the clock selection register. Since changing the parent of a probed device can be tricky, the new version of the get_rate helper provides the rate of the selected clock and not that of the parent. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-08-24clk: ccf: mux: fix access to the sandbox registerDario Binacchi
The tests developed for the mux clock are run on the sandbox. They don't call the clk_mux_set_parent routine and therefore they do not detect this error. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-08-24clk: ccf: mux: fix typoDario Binacchi
Close the opening bracket. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-08-24clk: ccf: mux: change include orderDario Binacchi
Apply u-boot coding style on include files order. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-08-24clk: fix the console output of clk_registerDario Binacchi
The parent->name variable can be used only in case the uclass_get_device_by_name routine returns successfully. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-08-24clk: set flags in the ccf registration routinesDario Binacchi
The top-level framework flags are passed as parameter to the common clock framework (ccf) registration routines without being used. Checks of the flags setting added by the patch have been added in the ccf test. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-08-24dm: test: clk: add the test for the ccf gated clockDario Binacchi
Unlike the other clock types, in the case of the gated clock, a new driver has been developed which does not use the registering routine provided by the common clock framework. The addition of the ecspi0 clock to sandbox therefore allows testing the ccf gate clock. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-24clk: imx6: Add definition for IMX6QDL_CLK_ENET_REF clockLukasz Majewski
After commit 673f6597321d ("net: fec_mxc: support i.MX8M with CLK_CCF") all NXP boards, which are not IMX8 and in the same time are supporting CCF need to provide PTP clock. On the i.MX6Q this clock is provided with IMX6QDL_CLK_ENET_REF in the Linux kernel's CCF. Code in this change models the simplest case when enet reference clock is generated from 'osc' clock. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-08-24clk: imx: Add support for pllv3 enet clockLukasz Majewski
This code has been ported from Linux kernel v5.5.5 (tag) and has been adjusted to U-Boot's DM. It adds support for correct recognition of IMX_PLLV3_ENET flag in the clk-pllv3.c driver. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-08-24clk: imx6: Add definition for IMX6QDL_CLK_ENET clockLukasz Majewski
After commit 673f6597321d ("net: fec_mxc: support i.MX8M with CLK_CCF") all NXP boards, which are not IMX8 and in the same time are supporting CCF need to provide IMX6QDL_CLK_ENET. This change defines the missing clock in i.MX6Q's CCF. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-08-24clk: ICS8N3QV01 remove superfluous codeHeinrich Schuchardt
Do not calculate a unused value of n which is overwritten in both branches of the subsequent if statement. Identified by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-08-23Merge tag 'dm-pull-22aug20' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm replace devfdt_get_addr_ptr() with dev_read_addr_ptr() binman fixes for portage various minor fixes 'bind' command improvements
2020-08-23Convert CONFIG_SPLASH_SCREEN et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SPLASH_SCREEN CONFIG_SPLASH_SCREEN_ALIGN CONFIG_SPLASHIMAGE_GUARD CONFIG_SPLASH_SOURCE Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-22treewide: convert devfdt_get_addr_ptr() to dev_read_addr_ptr()Masahiro Yamada
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To help this tedious work, this commit converts devfdt_get_addr_ptr() to dev_read_addr_ptr() by coccinelle. I also removed redundant casts because dev_read_addr_ptr() returns an opaque pointer. To generate this commit, I ran the following semantic patch excluding include/dm/. <smpl> @@ type T; expression dev; @@ -(T *)devfdt_get_addr_ptr(dev) +dev_read_addr_ptr(dev) @@ expression dev; @@ -devfdt_get_addr_ptr(dev) +dev_read_addr_ptr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22ata: mvebu: use dev_read_addr() to get base addressMasahiro Yamada
It is strange to use devfdt_get_addr_ptr(), then cast the pointer back to ulong because you could use devfdt_get_addr() without casting. Convert it to dev_read_addr(), which is capable to CONFIG_OF_LIVE. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-08-22gpio: at91: use dev_read_addr() to get base addressMasahiro Yamada
It is strange to use devfdt_get_addr_ptr(), then cast the pointer back to uint32 because you could use devfdt_get_addr() without casting. Convert it to dev_read_addr(), which is capable to CONFIG_OF_LIVE. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22dm: core: Fix devfdt_get_addr_ptr return valueOvidiu Panait
According to the description of devfdt_get_addr_ptr, this function should return NULL on failure, but currently it returns (void *)FDT_ADDR_T_NONE. Fix this by making devfdt_get_addr_ptr return NULL on failure, as described in the function comments. Also, update the drivers currently checking (void *)FDT_ADDR_T_NONE to check for NULL. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22sandbox: phy: add driver_data for bind test cmdPatrice Chotard
Add driver data to existing compatible string "sandbox,phy". Add an additional compatible string without driver_data This will verify that bind command parses, finds and passes the correct driver data to device_bind_with_driver_data() by using driver_data in the second sandbox_phy_ids table entry. In sandbox_phy_bind() a check is added to validate driver_data content. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22dm: fix ofnode_read_addr/size_cells()Heinrich Schuchardt
In the case of the live tree ofnode_read_addr_cells() and ofnode_read_size_cells() return the #address-cells and #size-cells defined in the parent node. With the patch the same is done for a non-live tree. The only consumer of these functions is currently the CFI flash driver. This patch fixes the incorrect parsing of the device tree leading to 'saveenv' failing on qemu_arm64_defconfig. For testing qemu-system-aarch64 has to be called with -drive if=pflash,format=raw,index=1,file=envstore.img to provide the flash memory. envstore.img must be 64 MiB large. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-08-20Merge tag 'xilinx-for-v2020.10-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2020.10-rc3 - Fix fdtfile variable setup - Fix bootm_*/fdt_high/initrd_high variables handling - Fix Kconfig dependencies for Xilinx drivers - Fix booting u-boot from lowest memory - Fix firmware payload argument count for Versal - Fix dfu configurations - Fix mio_bank property handling - Fix and align code around ID detection - Start to use ENV_VARS_UBOOT_RUNTIME_CONFIG - Simplify logic around reading MAC from eeprom - Decrease malloc length for zynqmp mini qspi - Enable preboot for ZynqMP and Versal i2c: - Fix i2c eeprom partitions handling mmc: - Fix logic around HS mode enabling and use proper functions
2020-08-20clk: versal: Move pm_query_id out of clock driverMichal Simek
There is no reason to have firmware specific structure in clock driver. Move it to generic location and also initialize enum values which is based on https://lore.kernel.org/linux-arm-kernel/20200318125003.GA2727094@kroah.com/ recommended way to go to make sure that values guaranteed by compiler. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20mmc: sdhci: Use upper/lower_32_bits macrosMichal Simek
Instead of recasting and shifting use macros which are designed for taking upper/lower 32bit value from 64bit variable. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20mmc: sdhci: Enable high speed conditional on the corresponding bitFaiz Abbas
The capabilities register has a field to indicate whether the host supports high speed mode or not. Add high speed host_caps based on this bit instead of enabling it by default. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Michal Simek <michal.simek@xilnx.com> Tested-by: Michal Simek <michal.simek@xilnx.com> (zcu104 with sdhci-caps-mask = <0 0x200000>;)
2020-08-20xilinx: zynqmp: fix incorrect map not align with IPI HWIbai Erkiaga
Current IPI module register description is not align with IPI HW. The registers with the wrong offset are not used so it does not cause real issues. This patch aligns the register description. Additionally comments added to explain why recv function does not check any flag prior copying rx data. Fixes: 660b0c77d816 ("mailbox: zynqmp: ipi mailbox driver") Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: zynqmp: merge firmware calls for EL2 and EL3Ibai Erkiaga
This patch merges ZynqMP firmware calls under xilinx_pm_request in order to make trainsparent the EL. Calls at EL3 are send through IPI messages and EL2 through SMC calls. The EL2 call uses fixed payload and arg size as the EL3 call. The firmware is capable to handle PMUFW_PAYLOAD_ARG_CNT bytes but the firmware API is limited by the SMC call size. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: zynqmp: synchronize firmware call return payloadIbai Erkiaga
Removes duplicated definition of PAYLOAD_ARG_CNT and define it in the firmware driver. Additionally fixes payload buffer declarations without macro usage Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20mmc: zynq: Fix default value for xlnx,mio-bankMichal Simek
DT binding is saying that default value is 0 not -1 that's why fix it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-08-20xilinx: Fix xlnx,mio_bank propertyMichal Simek
s/xlnx,mio_bank/xlnx,mio-bank/g DT binding is describing mio-bank not mio_bank that's why fix all DTSes and also driver itself. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-08-20i2c: eeprom: Use reg property instead of offset and sizeMichal Simek
Remove adhoc dt binding for fixed-partition definition for i2c eeprom. fixed-partition are using reg property instead of offset/size pair. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-20xilinx: kconfig: Change Kconfig dependencies for Xilinx driversMichal Simek
Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in PL and vice versa. That's why change dependencies and do not limit enabling just for some platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-08-19ahci: mediatek: add ahci driverFrank Wunderlich
add AHCI driver ported from linux https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/ata/ahci_mtk.c Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2020-08-19reset: add basic reset controller for pciesysFrank Wunderlich
bind reset controller to pciesys Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2020-08-19phy: mtk-tphy: add PHY_TYPE_SATAFrank Wunderlich
add support for PHY_TYPE_SATA to Mediateks TPHY driver Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
2020-08-19PCI: mediatek: Add PCIe support for MT7622Chuanjia Liu
This patch adds PCIe support for the Mediatek MT7622 SOC. Signed-off-by: Chuanjia Liu <Chuanjia.Liu@mediatek.com> Signed-off-by: Henry Yen <henry.yen@mediatek.com>
2020-08-19clk: mediatek: add pciesys support for MT7622 SoCChuanjia Liu
This patch adds pciesys support in clock driver for MediaTek MT7622 SoC. Signed-off-by: Henry Yen <henry.yen@mediatek.com> Signed-off-by: Chuanjia Liu <Chuanjia.Liu@mediatek.com>
2020-08-19pinctrl: mediatek: mt8512: fix the wrong start address of rangesChunfeng Yun
The start address of dout, pullen and pullsel ragnes are wrong, so fix up them. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
2020-08-18serial: uniphier: fix typo in commentMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-08-14board: xen: De-initialize before jumping to LinuxOleksandr Andrushchenko
Free resources used by Xen board before jumping to Linux kernel. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-14xen: pvblock: Print found devices indicesAnastasiia Lukianenko
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-14xen: pvblock: Implement front-back protocol and do IOAnastasiia Lukianenko
Implement Xen para-virtual frontend to backend communication and actually read/write disk data. This is based on mini-os implementation of the para-virtual block frontend driver. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
2020-08-14xen: pvblock: Read XenStore configuration and initializeAnastasiia Lukianenko
Read essential virtual block device configuration data from XenStore, initialize front ring and event channel. Update block device description with actual block size. Use code for XenStore from mini-os. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
2020-08-14xen: pvblock: Enumerate virtual block devicesAnastasiia Lukianenko
Enumerate Xen virtual block devices found in XenStore and instantiate pvblock devices. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-23 19:10:57 +0000