summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-08-24clk: ICS8N3QV01 remove superfluous codeHeinrich Schuchardt
Do not calculate a unused value of n which is overwritten in both branches of the subsequent if statement. Identified by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-08-23Merge tag 'dm-pull-22aug20' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm replace devfdt_get_addr_ptr() with dev_read_addr_ptr() binman fixes for portage various minor fixes 'bind' command improvements
2020-08-23Convert CONFIG_SPLASH_SCREEN et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SPLASH_SCREEN CONFIG_SPLASH_SCREEN_ALIGN CONFIG_SPLASHIMAGE_GUARD CONFIG_SPLASH_SOURCE Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-22treewide: convert devfdt_get_addr_ptr() to dev_read_addr_ptr()Masahiro Yamada
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To help this tedious work, this commit converts devfdt_get_addr_ptr() to dev_read_addr_ptr() by coccinelle. I also removed redundant casts because dev_read_addr_ptr() returns an opaque pointer. To generate this commit, I ran the following semantic patch excluding include/dm/. <smpl> @@ type T; expression dev; @@ -(T *)devfdt_get_addr_ptr(dev) +dev_read_addr_ptr(dev) @@ expression dev; @@ -devfdt_get_addr_ptr(dev) +dev_read_addr_ptr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22ata: mvebu: use dev_read_addr() to get base addressMasahiro Yamada
It is strange to use devfdt_get_addr_ptr(), then cast the pointer back to ulong because you could use devfdt_get_addr() without casting. Convert it to dev_read_addr(), which is capable to CONFIG_OF_LIVE. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-08-22gpio: at91: use dev_read_addr() to get base addressMasahiro Yamada
It is strange to use devfdt_get_addr_ptr(), then cast the pointer back to uint32 because you could use devfdt_get_addr() without casting. Convert it to dev_read_addr(), which is capable to CONFIG_OF_LIVE. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22dm: core: Fix devfdt_get_addr_ptr return valueOvidiu Panait
According to the description of devfdt_get_addr_ptr, this function should return NULL on failure, but currently it returns (void *)FDT_ADDR_T_NONE. Fix this by making devfdt_get_addr_ptr return NULL on failure, as described in the function comments. Also, update the drivers currently checking (void *)FDT_ADDR_T_NONE to check for NULL. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22sandbox: phy: add driver_data for bind test cmdPatrice Chotard
Add driver data to existing compatible string "sandbox,phy". Add an additional compatible string without driver_data This will verify that bind command parses, finds and passes the correct driver data to device_bind_with_driver_data() by using driver_data in the second sandbox_phy_ids table entry. In sandbox_phy_bind() a check is added to validate driver_data content. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22dm: fix ofnode_read_addr/size_cells()Heinrich Schuchardt
In the case of the live tree ofnode_read_addr_cells() and ofnode_read_size_cells() return the #address-cells and #size-cells defined in the parent node. With the patch the same is done for a non-live tree. The only consumer of these functions is currently the CFI flash driver. This patch fixes the incorrect parsing of the device tree leading to 'saveenv' failing on qemu_arm64_defconfig. For testing qemu-system-aarch64 has to be called with -drive if=pflash,format=raw,index=1,file=envstore.img to provide the flash memory. envstore.img must be 64 MiB large. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-08-20Merge tag 'xilinx-for-v2020.10-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2020.10-rc3 - Fix fdtfile variable setup - Fix bootm_*/fdt_high/initrd_high variables handling - Fix Kconfig dependencies for Xilinx drivers - Fix booting u-boot from lowest memory - Fix firmware payload argument count for Versal - Fix dfu configurations - Fix mio_bank property handling - Fix and align code around ID detection - Start to use ENV_VARS_UBOOT_RUNTIME_CONFIG - Simplify logic around reading MAC from eeprom - Decrease malloc length for zynqmp mini qspi - Enable preboot for ZynqMP and Versal i2c: - Fix i2c eeprom partitions handling mmc: - Fix logic around HS mode enabling and use proper functions
2020-08-20clk: versal: Move pm_query_id out of clock driverMichal Simek
There is no reason to have firmware specific structure in clock driver. Move it to generic location and also initialize enum values which is based on https://lore.kernel.org/linux-arm-kernel/20200318125003.GA2727094@kroah.com/ recommended way to go to make sure that values guaranteed by compiler. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20mmc: sdhci: Use upper/lower_32_bits macrosMichal Simek
Instead of recasting and shifting use macros which are designed for taking upper/lower 32bit value from 64bit variable. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20mmc: sdhci: Enable high speed conditional on the corresponding bitFaiz Abbas
The capabilities register has a field to indicate whether the host supports high speed mode or not. Add high speed host_caps based on this bit instead of enabling it by default. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Michal Simek <michal.simek@xilnx.com> Tested-by: Michal Simek <michal.simek@xilnx.com> (zcu104 with sdhci-caps-mask = <0 0x200000>;)
2020-08-20xilinx: zynqmp: fix incorrect map not align with IPI HWIbai Erkiaga
Current IPI module register description is not align with IPI HW. The registers with the wrong offset are not used so it does not cause real issues. This patch aligns the register description. Additionally comments added to explain why recv function does not check any flag prior copying rx data. Fixes: 660b0c77d816 ("mailbox: zynqmp: ipi mailbox driver") Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: zynqmp: merge firmware calls for EL2 and EL3Ibai Erkiaga
This patch merges ZynqMP firmware calls under xilinx_pm_request in order to make trainsparent the EL. Calls at EL3 are send through IPI messages and EL2 through SMC calls. The EL2 call uses fixed payload and arg size as the EL3 call. The firmware is capable to handle PMUFW_PAYLOAD_ARG_CNT bytes but the firmware API is limited by the SMC call size. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: zynqmp: synchronize firmware call return payloadIbai Erkiaga
Removes duplicated definition of PAYLOAD_ARG_CNT and define it in the firmware driver. Additionally fixes payload buffer declarations without macro usage Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20mmc: zynq: Fix default value for xlnx,mio-bankMichal Simek
DT binding is saying that default value is 0 not -1 that's why fix it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-08-20xilinx: Fix xlnx,mio_bank propertyMichal Simek
s/xlnx,mio_bank/xlnx,mio-bank/g DT binding is describing mio-bank not mio_bank that's why fix all DTSes and also driver itself. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-08-20i2c: eeprom: Use reg property instead of offset and sizeMichal Simek
Remove adhoc dt binding for fixed-partition definition for i2c eeprom. fixed-partition are using reg property instead of offset/size pair. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-20xilinx: kconfig: Change Kconfig dependencies for Xilinx driversMichal Simek
Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in PL and vice versa. That's why change dependencies and do not limit enabling just for some platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-08-19ahci: mediatek: add ahci driverFrank Wunderlich
add AHCI driver ported from linux https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/ata/ahci_mtk.c Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2020-08-19reset: add basic reset controller for pciesysFrank Wunderlich
bind reset controller to pciesys Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2020-08-19phy: mtk-tphy: add PHY_TYPE_SATAFrank Wunderlich
add support for PHY_TYPE_SATA to Mediateks TPHY driver Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
2020-08-19PCI: mediatek: Add PCIe support for MT7622Chuanjia Liu
This patch adds PCIe support for the Mediatek MT7622 SOC. Signed-off-by: Chuanjia Liu <Chuanjia.Liu@mediatek.com> Signed-off-by: Henry Yen <henry.yen@mediatek.com>
2020-08-19clk: mediatek: add pciesys support for MT7622 SoCChuanjia Liu
This patch adds pciesys support in clock driver for MediaTek MT7622 SoC. Signed-off-by: Henry Yen <henry.yen@mediatek.com> Signed-off-by: Chuanjia Liu <Chuanjia.Liu@mediatek.com>
2020-08-19pinctrl: mediatek: mt8512: fix the wrong start address of rangesChunfeng Yun
The start address of dout, pullen and pullsel ragnes are wrong, so fix up them. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
2020-08-18serial: uniphier: fix typo in commentMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-08-14board: xen: De-initialize before jumping to LinuxOleksandr Andrushchenko
Free resources used by Xen board before jumping to Linux kernel. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-14xen: pvblock: Print found devices indicesAnastasiia Lukianenko
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-14xen: pvblock: Implement front-back protocol and do IOAnastasiia Lukianenko
Implement Xen para-virtual frontend to backend communication and actually read/write disk data. This is based on mini-os implementation of the para-virtual block frontend driver. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
2020-08-14xen: pvblock: Read XenStore configuration and initializeAnastasiia Lukianenko
Read essential virtual block device configuration data from XenStore, initialize front ring and event channel. Update block device description with actual block size. Use code for XenStore from mini-os. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
2020-08-14xen: pvblock: Enumerate virtual block devicesAnastasiia Lukianenko
Enumerate Xen virtual block devices found in XenStore and instantiate pvblock devices. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-14xen: pvblock: Add initial support for para-virtualized block driverAnastasiia Lukianenko
Add initial infrastructure for Xen para-virtualized block device. This includes compile-time configuration and the skeleton for the future driver implementation. Add new class UCLASS_PVBLOCK which is going to be a parent for virtual block devices. Add new interface type IF_TYPE_PVBLOCK. Implement basic driver setup by reading XenStore configuration. Signed-off-by: Andrii Anisov <andrii_anisov@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
2020-08-14xen: Port Xen grant table driver from mini-osOleksandr Andrushchenko
Make required updates to run on u-boot. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
2020-08-14xen: Port Xen bus driver from mini-osOleksandr Andrushchenko
Make required updates to run on u-boot and strip test code. Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
2020-08-14linux/compat.h: Add wait_event_timeout macroOleksandr Andrushchenko
Add wait_event_timeout - sleep until a condition gets true or a timeout elapses. This is a stripped version of the same from Linux kernel with the following u-boot specific modifications: - no wait queues supported - use u-boot timer to detect timeouts - check for Ctrl-C pressed during wait Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> [trini: Drop atomic_read from gadget/ether.c as this has existed for a while and now causes problems] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-14serial: serial_xen: Add Xen PV serial driverPeng Fan
Add support for Xen para-virtualized serial driver. This driver fully supports serial console for the virtual machine. Please note that as the driver is initialized late, so no banner nor memory size is visible. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-14xen: Port Xen event channel driver from mini-osOleksandr Andrushchenko
Make required updates to run on u-boot. Strip functionality not needed by U-boot. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
2020-08-14xen: Port Xen hypervisor related code from mini-osOleksandr Andrushchenko
Port hypervisor related code from Mini-OS. This is referencing the code of Mini-OS from [1] by Huang Shijie and Volodymyr Babchuk which is for ARM64. Update essential arch code to support required bit operations, memory barriers etc. Copyright for the bits ported belong to at least the following authors, please see related files for details: Copyright (c) 2002-2003, K A Fraser Copyright (c) 2005, Grzegorz Milos, gm281@cam.ac.uk,Intel Research Cambridge Copyright (c) 2014, Karim Allah Ahmed <karim.allah.ahmed@gmail.com> [1] - https://github.com/zyzii/mini-os.git Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> [trini: Drop wmb() from musb-net/linux-compat.h now] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-14drivers: pcie: add Broadcom IPROC PCIe RC driverSrinath Mannam
Add support for IPROC PAXC PCIe RC driver. Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-14drivers: pci: add api to get dma regionsRayagonda Kokatanur
Add api to get dma regions. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
2020-08-13Merge tag 'u-boot-stm32-20200813' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Use IS_ENABLED to prevent ifdef in board_key_check for STM32MP - Add STM32 FMC2 EBI controller driver - Fix dwc3-sti-glue which allows STiH410-B2260 to boot again - Add fitImage its entry for 587-200 DHCOR SoM - Add both PDK2 and DRC02 DT into DHCOM fitImage its - Fix DHCOM KS8851 ethernet MAC address - Remove stm32mp1 board.c file - Use const for struct node_info in board stm32mp1.c file
2020-08-13mtd: rawnand: stm32_fmc2: get resources from parent nodeChristophe Kerello
FMC2 EBI support has been added. Common resources (registers base address and clock) can now be shared between the 2 drivers using "st,stm32mp1-fmc2-nfc" compatible string. It means that the common resources should now be found in the parent device when EBI node is available. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driverChristophe Kerello
The driver adds the support for the STMicroelectronics FMC2 EBI controller found on STM32MP SOCs. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: use clrsetbits_le32Christophe Kerello
This patch uses clrsetbits_le32 function instead of multiple instructions. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macrosChristophe Kerello
This patch removes custom macros and uses FIELD_PREP and FIELD_GET macros. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: cosmetic change to use nfc instead of fmc2 where ↵Christophe Kerello
relevant This patch renames functions and local variables. This cleanup is done to get all functions starting by stm32_fmc2_nfc in the FMC2 raw NAND driver when all functions will start by stm32_fmc2_ebi in the FMC2 EBI driver. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_5S for timeoutsChristophe Kerello
FMC2_TIMEOUT_5S will be used each time that we need to wait. It was seen, during stress tests in an overloaded system, that we could be close to 1 second, even if we never met this value. To be safe, FMC2_TIMEOUT_MS is set to 5 seconds. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: remove useless inline commentsChristophe Kerello
Remove inline comments that are useless since function label are self explanatory. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: fix a buffer overflowChristophe Kerello
The chip select defined in the device tree could only be 0 or 1. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
generated by cgit (git 2.34.1) at 2024-12-24 12:44:53 +0000