summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-11-01Merge branch 'master' of git://www.denx.de/git/u-boot-armWolfgang Denk
2007-10-23Move PL01* serial drivers to drivers/serial and adjust Makefiles.Peter Pearse
2007-10-19tsec driver should clear RHALT on startupDan Wilson
This was causing problems for some people. Signed-off-by: Alain Gravel <agravel@fulcrummicro.com> Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-10-15Merge branch 'master' of git://www.denx.de/git/u-boot-usbWolfgang Denk
2007-10-13Merge branch 'merge' of git://www.denx.de/git/u-boot-microblazeWolfgang Denk
2007-10-13Merge branch 'master' of git://www.denx.de/git/u-boot-nand-flashWolfgang Denk
2007-10-13Coding Style cleanup.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-10-04Merge with git://www.denx.de/git/u-boot.gitPeter Pearse
2007-10-02Bugfix: Use only one PTD for one endpointTimo Ketola
Original isp116x-hcd code prepared multiple PTDs for longer than 16 byte transfers for one endpoint. That is unnecessary because the ISP116x is able to split long data from one PTD into multiple transactions based on the buffer size of the endpoint. It also caused serious problems if the endpoint NAKed some of the transactions. In that case ISP116x wouldn't notice that the other PTDs were for the same endpoint and would try the other PTDs possibly out of order. That would break the whole transfer. This patch makes isp116x_submit_job to use one PTD for one transfer. Signed-off-by: Timo Ketola <timo.ketola@exertus.fi> Signed-off-by: Markus Klotzbuecher <mk@denx.de>
2007-09-24[PATCH] Change macro name for UartLiteMichal Simek
because PowerPC 405 can use UartLite as console
2007-09-24synchronizition with mainlineMichal Simek
2007-09-24Merge ../u-bootMichal Simek
2007-09-18Move coloured led API to status_led.hPeter Pearse
Improve indentation in drivers/at45.c
2007-09-18Merge with git://www.denx.de/git/u-boot.gitPeter Pearse
2007-09-17Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher
2007-09-17Description: Add NEC's PCI OHCI module ID to the USB OHCI driverDavid Saada
Signed-off-by: David Saada <david.saada@ecitele.com>
2007-09-17Small whitespace cleanup of OneNAND patchStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-09-17OneNAND support (take #2)Kyungmin Park
[PATCH 2/3] OneNAND support (take #2) OneNAND support at U-Boot Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-09-17OneNAND support (take #2)Kyungmin Park
[PATCH 1/3] OneNAND support (take #2) OneNAND support at U-Boot Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-09-15Typo fix in tsec.curwithsughosh@gmail.com
Fixup for the break statement in wrong place. [Patch by urwithsughosh@gmail.com] Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-09-15Fix do_div() usage in nand process outputMatthias Fuchs
Fix usage of do_div() in nand erase|read|write process output. The last patch to nand_util.c introduced do_div() instead of libgcc's implementation. But do_div() returns the quotient in its first macro parameter and not as result. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2007-09-15Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as globalWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-09-11Merge git://www.denx.de/git/u-bootMichal Simek
2007-09-07Merge with git://www.denx.de/git/u-boot.gitPeter Pearse
2007-09-07PXA270: Added support for TrizepsIV board.stefano babic
This patch add support for the Trizeps IV module (520Mhz). Signed-off-by: Stefano Babic <sbabic@denx.de>
2007-09-07Add BUILD_DIR support for bios emulator.Jason Jin
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2007-09-06Add support for Sil680 IDE controller.Gary Jennejohn
o add drivers/sil680.c to support the Sil680 IDE-controller. o drivers/Makefile: add sil680.o. Signed-off-by: Gary Jennejohn <garyj@denx.de>
2007-09-04Ran Lindent on drivers/at45.cPeter Pearse
2007-09-02Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-08-31ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx SequoiaGary Jennejohn
The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is set to non-zero, because it doesn't support MRM (memory-read- multiple) correctly. We now added the possibility to configure this register in the board config file, so that the default value of 8 can be overridden. Here the details of this patch: o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow board-specific settings. As an example the sequoia board requires 0. Idea from Stefan Roese <sr@denx.de>. o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the PCI IO-space. Obtained from Stefan Roese <sr@denx.de>. o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set CFG_PCI_CACHE_LINE_SIZE to 0. Signed-off-by: Gary Jennejohn <garyj@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2007-08-30Revert "Fix MPC8544DS PCIe3 scsi."Ed Swarthout
This reverts commit 9468e680. Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2007-08-29Fix MPC8544DS PCIe3 scsi.Kumar Gala
<ed.swarthout@freescale.com> The problem is pciauto_setup_device() getting called from fsl_pci_init.c is allocating memory space it doesn't need. Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-08-29Fix MAC address setting in DM9000 driver.stefano babic
The logic to check if there is a correct MAC address in the DM9000 EEPROM, added in the last patch, is wrong. Now the MAC address is always taken from the environment, even if a suitable MAC is present in the EEPROM. Signed-off-by: Stefano Babic <sbabic@denx.de>
2007-08-29MPC5xxx: fix some compiler warnings in USB codeMartin Krause
Fix the following warnings: - usb.c:xx: warning: function declaration isn't a prototype - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer from pointer wihtout a cast Signed-off-by: Martin Krause <martin.krase@tqs.de>
2007-08-29fsl_pci_init - Remove self PCSRBAR allocationEd Swarthout
CPU physical address space was being wasted by allocating a PCSRBAR PCI inbound region to it's memory space. As a rule, PCSRBAR should be left alone since it does not affect transactions from self and other masters may have changed it. Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
2007-08-19Fix some build errors.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-08-18Merge with /home/wd/git/u-boot/custodian/u-boot-coldfireWolfgang Denk
2007-08-18PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bugShinya Kuribayashi
This patch has been sent on: - 6 Jun 2007 Many users of PCI config read routines tend to ignore the function ret value, and are only concerned about the contents of *val. Based on this, pci_hose_read_config_{byte,word}_via_dword should initialize the *val on dword read error. Without this fix, for example, we'll go on scanning bus with vendor or header_type uninitialized. This brings many unnecessary config trials. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2007-08-16ColdFire: Add M54455EVB for MCF5445xTsiChungLiew
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-08-16ColdFire: MCF5329 Update and cleanupTsiChungLiew
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-08-16Merge branch 'denx-coldfire' into coldfire-aug2007John Rigby
2007-08-16Don't wait for disconnected TSECsAndy Fleming
The TSEC driver's PHY code waits a long time for autonegotiation to complete, even if the link is down. The PHY knows the link is down or up before autonegotiation completes, so we can short-circuit the process if the link is down. Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-08-16Fix numerous bugs in the 8568 UEC supportAndy Fleming
Actually, fixed a large bug in the UEC for *all* platforms. How did this ever work? uec_init() did not follow the spec for eth_init(), and returned 0 on success. Switch it to return the link like tsec_init() (and 0 on error) The immap for the 8568 was defined based on MPC8568, rather than CONFIG_MPC8568 CONFIG_QE was off CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0" Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is enabled Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-08-16Define tsec flag values in config filesAndy Fleming
The tsec_info structure and array has a "flags" field for each ethernet controller. This field is the only reason there are settings. Switch to defining TSECn_FLAGS for each controller in the config header, and we can greatly simplify the array, and also simplify the addition of future boards. Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-08-16Merge with /home/wd/git/u-boot/masterWolfgang Denk
2007-08-16Bios emulator - fix microblaze toolchain problemMichal Simek
microblaze CPU have problem with bios_emulator code. Microblaze toolchain doesn't support PRAGMA PACK. Signed-off-by: Michal Simek <monstr@monstr.eu>
2007-08-16[FIX] Changes for bios_emulator code for others architectureMichal Simek
2007-08-16[FIX] Remove unused include fileMichal Simek
2007-08-15[FIX] Resolve problem with warningsMichal Simek
microblaze toolchain don't support PRAGMA PACK.
2007-08-15Merge git://www.denx.de/git/u-boot into mergeMichal Simek
generated by cgit (git 2.34.1) at 2024-12-29 05:42:39 +0000