summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-01-16clk: mediatek: add set_clr_upd mux type flowmingming lee
Add new set_clr_upd mux type and related operation to mtk common clock driver to support mt8512
2020-01-16clk: mediatek: add driver support for MT8512mingming lee
Add clock driver for MediaTek MT8512 SoC, include topckgen, apmixedsys and infracfg support. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-15Add dependencies for MALLOC_F and OF_LIBFDTSean Anderson
Some features implicitly depended on MALLOC_F and OF_LIBFDT and would fail at link-time if these features were not enabled. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-01-15Kconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMAVignesh Raghavendra
Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA. This allows to use macros such as CONFIG_IS_ENABLED() that allow conditional compilation of code for SPL and U-Boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-14mmc: fsl_esdhc: add compatible for fsl, imxrt-usdhcGiulio Benetti
Add compatible "fsl,imxrt-usdhc" to make mmc working on i.MXRT platforms with CONFIG_DM_MMC=y. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14mmc: fsl_esdhc: make if(CONFIG_IS_ENABLED(CLK)) an #if statementGiulio Benetti
Not all architectures(i.e. i.MXRT) support mxc_get_clock() and use DM_CLK instead. So building could result in failure due to missing mxc_get_clock(). Make if(CONFIG_IS_ENABLED(CLK)) an #if statement. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14ram: add SDRAM driver for i.MXRT SoCsGiulio Benetti
Add SDRAM driver for i.MXRT SoCs. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14serial_lpuart: add support for i.MXRTGiulio Benetti
Add i.MXRT compatible string and cpu type support to lpuart driver, to use little endian 32 bits configurations. Also according to RM, the Receive RX FIFO Enable (RXFE) field in LPUART FIFO register is bit 3, so this definition should change to 0x08 as done for i.MX8. It needs also to set baudrate the same way as i.MX8 does. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14serial_lpuart: add clock enable if CONFIG_CLK is definedGiulio Benetti
This driver assumes that lpuart clock is already enabled before probing but using DM only lpuart won't be automatically enabled so add clk_enable() when probing if CONFIG_CLK is defined. If clock is not found, because DM is not used, let's emit a warning and proceed, because serial clock could also be already enabled by non DM code. If clock is found but cna't be enabled then return with error. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14gpio: mxc_gpio: add support for i.MXRT1050Giulio Benetti
Add i.MXRT1050 support, there are 5 GPIO banks. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14pinctrl: add i.MXRT driverGiulio Benetti
Add i.MXRT pinctrl driver. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14clk: imx: add i.IMXRT1050 clk driverGiulio Benetti
Add i.MXRT1050 clk driver support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14clk: imx: pfd: add set_rate()Giulio Benetti
Implement set_rate() for pfd. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx: pllv3: add support for PLLV3_AV typeGiulio Benetti
Add support for PLLV3 AV type. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14clk: imx: pllv3: add PLLV3_SYS supportGiulio Benetti
Add PLLV3_SYS support by adding set/get_rate() for PLLV3_SYS but keeping generic enable()/disable(). Add a different driver because ops are different respect to GENERIC/USB. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx: pllv3: add set_rate() supportGiulio Benetti
Add generic set_rate() support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx: pllv3: add disable() supportGiulio Benetti
Add disable() support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx: pllv3: add enable() supportGiulio Benetti
Before set_rate() pllv3 needs enable() to power the pll up. Add enable() taking into account different power_bit and different powerup_set, because some pll needs its power_bit to be set or reset to be powered on. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14clk: imx: pllv3: set div_mask differently if PLLV3 is GENERIC or USBGiulio Benetti
div_mask is different for GENERIC and USB pll, so set it according. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx: pllv3: register PLLV3 GENERIC and USB as 2 different clocksGiulio Benetti
Better to register the 2 clock as 2 different drivers because they work slightly differently depending on power_bit and powerup_set bits coming on next patches. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx8qxp: extend to support getting I2C IPG clockAnatolij Gustschin
Since commit d02be21d3004 ("i2c: imx_lpi2c: add ipg clk") getting I2C clocks doesn't work. Add I2C IPG clock IDs to related switch statements to fix it. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Lukasz Majewski <lukma@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-01-14mmc: fsl_esdhc_imx: Handle the "broken-cd" propertyFabio Estevam
When no GPIO is used to read the card detect status the following error is seen: MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... MMC: no card present *** Warning - No block device, using default environment Fix it by handling the "broken-cd" property in the same way that drivers/mmc/sdhci.c does, which considers that the SD card is present when the "broken-cd" property is passed. Tested on a imx6ul-evk board. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-01-10virtio: fix typo devicdHeinrich Schuchardt
%s/devicd/device Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-01-10poweroff: add poweroff for mt6323 pmicFrank Wunderlich
this adds poweroff to bananapi r2 / mt7623 / mt6323 pmic Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2020-01-10rtc: add support for DS3232 deviceHan Nandor
DS3232 is an i2c RTC with 236 bytes of battery-backed SRAM. Add an RTC driver for DS3232 device, which provides time and date support. Also read and write functions are provided, which can be used to access the SRAM memory. Signed-off-by: Nandor Han <nandor.han@vaisala.com>
2020-01-10bootcount: add a DM i2c eeprom backing store for bootcountRobert Beckett
This driver allows the use of i2c eeprom device or partition as backing store for boot counter values with DM enabled. Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-10drivers: mcfmii: add dm supportAngelo Durgehello
Add specific dm code, but maintaining this driver as is, so more in the shape of a mii library. Can be moved to dm in a further step. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-10drivers: fsl_mcdmafec: conversion to dmAngelo Durgehello
Full conversion to dm for all boards, legacy code removed. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-10drivers: mcffec: conversion to dmAngelo Durgehello
Full conversion to dm for all boards, legacy code removed. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-10drivers: net: add mcf fec dm Kconfig supportAngelo Durgehello
Add ColdFire fec to Kconfig. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-09Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-mpc83xxTom Rini
- A small PR with MC8309 fixes from Rasmus.
2020-01-09Merge tag 'dm-pull-8jan20' of git://git.denx.de/u-boot-dmTom Rini
dm: Increased separation of ofdata_to_platdata() and probe methods
2020-01-09Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DFU updates
2020-01-08Merge tag 'efi-2020-04-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc1 This pull request provides: * support for FIT images for UEFI binaries * drivers for hardware random number generators * an implementation of the EFI_RNG_PROTOCOL * a sub-command for efidebug to display configuration tables
2020-01-08Merge tag 'u-boot-imx-20200108' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------------------------------------------- Add i.MX8MP SoC and EVK board Update README for i.MX8MN EVK and fix mmc env Add pca9450 driver -------------------------------------------------------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
2020-01-08Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2020-01-08Merge tag 'u-boot-amlogic-20200108' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - Khadas VIM3L based on Amlogic S905D3 support - Various fixups for amlogic boards - Unnecessary header includes drop into video/meson
2020-01-08ata: fsl_sata: Continue probing other sata port when failed current port.Peng Ma
In the initialization of sata driver, we want to initialize all port probes, Therefore, any detection failure between of them should continue initialization by skipping the current port instead of exit. Signed-off-by: Peng Ma <peng.ma@nxp.com>
2020-01-08ata: sata_sil: Continue probing other sata port when failed current port.Peng Ma
In the initialization of sata driver, we want to initialize all port probes, Therefore, any detection failure between of them should continue initialization by skipping the current port instead of exit. Signed-off-by: Peng Ma <peng.ma@nxp.com>
2020-01-08clk: imx: add i.MX8MP clk driverPeng Fan
Add i.MX8MP clk driver for i.MX8MP CLK driver model usage Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08clk: imx: add imx_clk_mux2_flagsPeng Fan
Add imx_clk_mux2_flags which will be used by i.MX8MP Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08power: Add new PMIC PCA9450 driverYe Li
PCA9450 PMIC series is used to support iMX8MM (PCA9450A) and iMX8MN (PCA9450B). Add the PMIC driver for both PCA9450A and PCA9450B. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08ddr: imx8m: Add DRAM PLL to generate 1000Mhz outputPeng Fan
We will generate DRAM 4000MT/s as default for i.MX8MP. So need DRAM PLL to generate 1000Mhz clock to DDR PHY and controller. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08mxc_ocotp: support i.MX8MPPeng Fan
i.MX8MP use similar ocotp as i.MX8MN, but has changed fuse banks and ctrl register bit definitions, so update to reflect that. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08pinctrl: imx8m: support i.MX8MPPeng Fan
Add i.MX8MP compatible to let the pinctrl driver could support i.MX8MP. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08mpc83xx_clk: always treat MPC83XX_CLK_PCI as invalidRasmus Villemoes
The current mpc83xx_clk driver is broken for any board for which mpc83xx_has_pci() is true, i.e. anything not MPC8308: When is_clk_valid() reports that MPC83XX_CLK_PCI is valid, init_all_clks() proceeds to call init_single_clk(), but that doesn't know about either MPC83XX_CLK_PCI or has any handling of the TYPE_SCCR_ONOFF mode correctly returned by retrieve_mode(). Hence init_single_clk() ends up returning -EINVAL, and the whole board hangs in serial_init(). The quickest fix is to simply pretend that clock is invalid for all, since nobody can have been relying on it. Adding proper support seems to be a bit more involved than just handling TYPE_SCCR_ONOFF: - The power-on-reset value of SCCR[PCICM] is 0, so mpc83xx_clk_enable() would probably need to be tought to enable the clock. - The frequency of PCI_SYNC_OUT is either SYS_CLK_IN or SYS_CLK_IN/2 depending on the CFG_CLKIN_DIV configuration input, but that can't be read from software, so to properly fill out ->speed[MPC83XX_CLK_PCI] I think one would need guidance from Kconfig or dtb. Partially fixes: 07d538d281 clk: Add MPC83xx clock driver Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Mario Six <mario.six@gdsys.cc>
2020-01-07dm: Add a debug message when devices are skipped pre-relocSean Anderson
This adds a message to lists_bind_fdt when it skips initializing a device pre-relocation. I've had a couple errors where a device didn't initialize properly because one of its dependencies was missing. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-01-07dm: devres: Add a new OFDATA phaseSimon Glass
Since the ofdata_to_platdata() method can allocate resources, add it as a new devres phase. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: devres: Use an enum for the allocation phaseSimon Glass
At present we only support two phases where devres can be used: bind and probe. This is handled with a boolean. We want to add a new phase (platdata), so change this to an enum. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: devres: Add testsSimon Glass
The devres functionality has very few users in U-Boot, but it still should have tests. Add a few basic tests of the main functions. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-01-01 02:48:55 +0000