summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-11-07power: pmic: tps65941: Add support for tps65941 family of PMICsKeerthy
Add support to bind the regulators/child nodes with the pmic. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07misc: k3_avs: Add j721e supportKeerthy
j721e SoCs have different OPP tables. Add support for the same. Note: DM Still has lot of voltages TBD hence the correct values need to be programmed once they are published. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07power: regulator: tps6236x: add support for tps6236x regulatorsTero Kristo
TPS6236x is a family of step down DC-DC converters optimized for battery powered portable applications for a small solution size. Add a regulator driver for supporting these devices. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07clk: clk-ti-sci: Notify AVS driver upon setting clock rateKeerthy
Notify AVS driver upon setting clock rate so that voltage is changed accordingly. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07misc: k3_avs: add driver for K3 Adaptive Voltage Scaling Class 0Tero Kristo
Adaptive Voltage Scaling is a technology used in TI SoCs to optimize the operating voltage based on characterization data written to efuse during production. Add a driver to support this feature for K3 line of SoCs, initially for AM65x. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07arm: add initial support for the Phytium Durian Boardliu hao
This adds platform code and the device tree for the Phytium Durian Board. The initial support comprises the UART and the PCIE. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Tom Rini <trini@konsulko.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Steven Hao <liuhao@phytium.com.cn>
2019-11-07Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
- mpc85xx, socrates: Add dts, enable DM support, fix warnings, disable video
2019-11-07usb: composite: add BOS descriptor support to composite frameworkT Karthik Reddy
To add usb-3.0 support to peripheral device add BOS & SS capability descriptors to gadget composite framework. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Roger Quadros <rogerq@ti.com>
2019-11-07usb: gadget: Add gadget_is_cdns3() macroVignesh Raghavendra
Add a new bcdDevice entry for Cadence USB gadget controller similar to other controller and add gadget_is_cdns3() macro as well. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07usb: cdns3: Add TI wrapper driver for CDNS USB3 controllerVignesh Raghavendra
Add driver to handle TI specific wrapper for Cadence USB3 controller present on J721e SoC. Based on Linux driver for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07usb: cdns3: gadget: Implement udc_set_speed() callbackVignesh Raghavendra
Implement udc_set_speed() callback to limit Controller's speed to high-speed/full-speed when working with gadgets that are high-speed or full-speed only Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07usb: Add Cadence USB3 host and gadget driverVignesh Raghavendra
Add support for USB3 host and gadget driver. This is a direct sync of Linux kernel Cadence USB stack that from v5.4-rc1 release. Driver has been modified so that it compiles without errors against U-Boot code base. Features not required for U-Boot such as scatter-gather DMA and OTG interrupt handling has been dropped. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> [jjhiblot@ti.com: Add PHY support] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07usb: udc: Introduce ->udc_set_speed() methodSherry Sun
This patch was copied from kernel commit: 67fdfda4a99ed. Sometimes, the gadget driver we want to run has max_speed lower than what the UDC supports. In such situations, UDC might want to make sure we don't try to connect on speeds not supported by the gadget driver because that will just fail. So here introduce a new optional ->udc_set_speed() method which can be implemented by interested UDC drivers to achieve this purpose. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07usb: gadget: Add match_ep() op to usb_gadget_opsVignesh Raghavendra
Add match_ep() op to usb_gadget_ops similar to Linux kernel which is useful in finding a suitable ep match for the function driver. This will avoid adding more gadget_is_xxx() handling code to usb_ep_autoconfig(). Also sync usb_ep_caps struct thats is usually used in the match_ep() callback by the gadget controller driver Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-06Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DFU updates - USB Storage updates
2019-11-06pci: add DM based mpc85xx driverHeiko Schocher
add DM based PCI Configuration space access support for MPC85xx PCI Bridge. This driver is based on arch/powerpc/cpu/mpc85xx/pci.c In the old driver there is a fix for a hw issue on the TARGET_MPC8555CDS and TARGET_MPC8541CDS boards. As I have no such hardware I did not port this part. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-05net: fec_mxc: support i.MX8M with CLK_CCFPeng Fan
Add more clks for fec_mxc according to Linux Kernel 5.4.0-rc1 drivers/net/ethernet/freescale/fec_main.c. Since i.MX8MQ not support CLK_CCF, so add a check to restrict the code only effect when CONFIG_IMX8M and CONFIG_CLK_CCF both defined. Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05net: Kconfig: FEC: Add dependency on i.MX8MPeng Fan
Make FEC driver could be used by i.MX8M when CONFIG_FEC_MXC defined in defconfig. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-11-05clk: imx: imx8mm: add set_parent callbackPeng Fan
Add set_parent callback, then assigned-clock-parents in dts could be work. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-11-05clk: imx8mm: add enet clkPeng Fan
Add enet ref/timer/PHY_REF/root clk which are required to make enet function well. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-11-05clk: imx: add i.MX8MN ccf driverPeng Fan
Add i.MX8MM ccf driver support. Modifed from Linux Kernel 5.3.0-rc1, drop some entries that not used in U-Boot and adapt to U-Boot CCF style. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Lukasz Majewski <lukma@denx.de>
2019-11-05pinctrl: imx8m: support i.MX8MNPeng Fan
Support i.MX8MN in imx8m pinctrl driver Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05power: domain: add i.MX8 scu power domain driverPeng Fan
The power domain tree is not accepted by Linux Kernel upstream. only a single pd node is used currently, as following: pd: imx8qx-pd { compatible = "fsl,imx8qm-scu-pd", "fsl,scu-pd"; #power-domain-cells = <1>; }; So to migrate to use upstream linux dts, we also need a driver to support this. This patch is to support the new method, compared with legacy power domain tree, it will be simpiler, because each device will has resource id as power domain index, it will be directly passed to scfw, and no need to let power domain build that tree. If multiple power domain is needed, it is the dts node should has correctly power domains entry added and sequence correct. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05power: domain: make imx8-power-domain.c legacyPeng Fan
The current i.MX8 power domain driver is based on i.MX vendor power domain tree which will retire later. The Linux upstream use a single pd node for power domain driver, and U-Boot will adopt that. When U-Boot i.MX8 dts synced with Linux Kernel upstream and related driver ready, the legacy driver will be removed. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05misc: imx8: scu: simplify code to make it extendablePeng Fan
clk and pinctrl will be get(probed) during each device probe, we don't need to probe them in scu driver. Only need to bind the sub-nodes (clk and iomuxc) of MU node with their drivers. So drop the code to probe the clk/pinctrl, and this patch will make it easy to add more subnodes. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05mmc: fsl_esdhc_imx: Update compatible string for imx8mPeng Fan
To enable HS400(ES) and UHS for imx8m platforms, update the driver data to share with imx8qm esdhc_soc_data. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05mmc: fsl_esdhc_imx: drop redundant clock settingsPeng Fan
During mmc initialization, there are several calls to mmc_set_clock and mmc_set_ios. When mmc_power_off, the mmc->clock will be set, but the imx driver will use 400KHz. So the following calls to mmc_set_ios will set the clock several times which is redundant in fsl_esdhc_imx driver. So let's simplify to remove redundant clock settings. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05mmc: fsl_esdhc: clean up DM and non-DM codeYangbo Lu
Make DM and non-DM code clear using below structure. #if !CONFIG_IS_ENABLED(DM_MMC) <non-DM_MMC code> #else <DM_MMC code> #endif Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: always check write protect stateYangbo Lu
The QorIQ eSDHC on all platforms supports checking write protect state through register bit. So check it always. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: drop redundant code for non-removable featureYangbo Lu
Drop redundant code for non-removable feature. "non-removable" property has been read in mmc_of_parse(). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: convert to use fsl_esdhc_get_cfg_common()Yangbo Lu
The fsl_esdhc_init() was actually to get configuration of mmc_config. So rename it to fsl_esdhc_get_cfg_common() and make it common for both DM_MMC and non-DM_MMC. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: clean up bus width configuration codeYangbo Lu
This patch is to clean up bus width setting code. - For DM_MMC, remove getting "bus-width" from device tree. This has been done in mmc_of_parse(). - For non-DM_MMC, move bus width configuration from fsl_esdhc_init() to fsl_esdhc_initialize() which is non-DM_MMC specific. And fix up bus width configuration to support only 1-bit, 4-bit, or 8-bit. Keep using 8-bit if it's not set because many platforms use driver without providing max bus width. - Remove bus_width member from fsl_esdhc_priv structure. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: fix voltage validationYangbo Lu
Voltage validation should be done by CMD8. Current comparison between mmc_cfg voltages and host voltage capabilities is meaningless. So drop current comparison and let voltage validation is through CMD8. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: drop controller initialization in fsl_esdhc_init()Yangbo Lu
Controller initialization is not needed in fsl_esdhc_init(). It will be done in esdhc_init() for non-DM_MMC, and in esdhc_init_common() in probe for DM_MMC. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-04Merge tag 'u-boot-imx-20191104' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191104 ------------------- - i.MX NAND: nandbcb support for MX6UL / i.MX7 - i.MX8: support for HAB - Convert to DM (opos6ul, mccmon6) - Toradex i.MX6ull colibri - sync DTS with kernel Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/606853416
2019-11-04Merge branch '2019-11-04-ti-imports'Tom Rini
- Various CPSW related improvements, DTS resync
2019-11-04net: ti: cpsw: convert to use dev/ofnode apiGrygorii Strashko
Conver TI CPSW driver to use dev/ofnode api. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> [trini: Add <dm/ofnode.h> to provide the prototype to ofnode] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-03Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Add support for Intel FSP-S and FSP-T in binman - Correct priority selection for image loaders for SPL - Add a size check for TPL - Various small SPL/TPL bug fixes and changes - SPI: Add support for memory-mapped flash
2019-11-03nand: mxs_nand: add API for switching different BCH layoutsIgor Opaniuk
On i.MX7 in a sake of reducing the disturbances caused by a neighboring cells in the FCB page in the NAND chip, a randomizer is enabled when reading the FCB page by ROM bootloader. Add API for setting BCH to specific layout (and restoring it back) used by ROM bootloader to be able to burn it in a proper way to NAND using nandbcb command. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03mach-imx: Adding new argument for SIP call interfaceYe Li
Need to pass total 5 arguments for SIP HAB call on i.MX8MQ, so update the interface to add new argument. Signed-off-by: Ye Li <ye.li@nxp.com> [agust: fixed imx8m-power-domain build] Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-11-03power: pmic: Kconfig: add CONFIG_SPL_DM_PMIC_BD71837Peng Fan
Add CONFIG_SPL_DM_PMIC_BD71837 to make this driver could be used in SPL stage Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03pmic: bd71837: drop DEBUG macroPeng Fan
Drop DEBUG macro definition which is used for debug purpose. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03video: mxsfb: set gd->fb_baseSébastien Szymanski
Set gd->fb_base so it can be shown with bdinfo command. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-11-03watchdog: imx: Use immediate reset bits for expire_nowRobert Hancock
The expire_now function was previously setting the watchdog timeout to minimum and waiting for the watchdog to expire. However, this watchdog also has bits to trigger immediate reset. Use those instead, like the Linux imx2_wdt driver does. Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
2019-11-03watchdog: imx: Add DT ext-reset handlingRobert Hancock
The Linux imx2_wdt driver uses a fsl,ext-reset-output boolean in the device tree to specify whether the board design should use the external reset instead of the internal reset. Use this boolean to determine which mode to use rather than using external reset unconditionally. For the legacy non-DM mode, the external reset is always used in order to maintain the previous behavior. Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
2019-11-03net: ti: am65x-cpsw: fix mac tx internal delay for rgmii-rxid modeGrygorii Strashko
Now AM65x CPSW2G driver will disable MAC TX internal delay for PHY interface mode "rgmii-rxid" which is incorrect. Hence, fix it by keeping default value (enabled) for MAC TX internal delay when "rgmii-rxid" interface mode is selected. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2019-11-03net: ti: cpsw: fix mac tx internal delay for rgmii-rxid modeGrygorii Strashko
Now TI CPSW driver will disable MAC TX internal delay for PHY interface mode "rgmii-rxid" which is incorrect. Hence, fix it by keeping default value (enabled) for MAC TX internal delay when "rgmii-rxid" interface mode is selected. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2019-11-03net: ti: cpsw: add support for standard eth "max-speed" dt propertyGrygorii Strashko
This patch adds support for standard Ethernet "max-speed" DT property to allow PHY link speed limitation. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2019-11-03net: ti: cpsw: move parsing of dt port's parameters in separate funcGrygorii Strashko
Move parsing of dt port's parameters in separate func for better code readability. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2019-11-03net: ti: cpsw: enable 10Mbps link speed support in rgmii modeGrygorii Strashko
According to TRMs the 10Mbps link speed is supported in RGMII only when CPSW2G MAC SL is configured for External Control ("in band") mode CPSW_SL_MACCTRL.EXT_EN(18) = 1. Hence update cpsw_slave_update_link() to follow documentation. [1] https://patchwork.kernel.org/patch/10285239/ Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
generated by cgit (git 2.34.1) at 2025-01-08 16:38:33 +0000