summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2012-10-17fs: fat: Fix mkcksum() function parametersMarek Vasut
The mkcksum() function now takes one parameter, the pointer to 11-byte wide character array, which it then operates on. Currently, the function is wrongly passed (dir_entry)->name, which is only 8-byte wide character array. Though by further inspecting the dir_entry structure, it can be noticed that the name[8] entry is immediatelly followed by ext[3] entry. Thus, name[8] and ext[3] in the dir_entry structure actually work as this 11-byte wide array since they're placed right next to each other by current compiler behavior. Depending on this is obviously wrong, thus fix this by correctly passing both (dir_entry)->name and (dir_entry)->ext to the mkcksum() function and adjust the function appropriately. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com>
2012-10-15ARM: prevent misaligned array initsAlbert ARIBAUD
Under option -munaligned-access, gcc can perform local char or 16-bit array initializations using misaligned native accesses which will throw a data abort exception. Fix files where these array initializations were unneeded, and for files known to contain such initializations, enforce gcc option -mno-unaligned-access. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> [trini: Switch to usign call cc-option for -mno-unaligned-access as Albert had done previously as that's really correct] Signed-off-by: Tom Rini <trini@ti.com>
2012-10-08yaffs2: Fix GCC 4.6 compile warningsAnatolij Gustschin
Fix: yaffs_guts.c: In function 'yaffs_check_chunk_erased': yaffs_guts.c:324:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_guts.c: In function 'yaffs_verify_chunk_written': yaffs_guts.c:352:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_guts.c: In function 'yaffs_grab_chunk_cache': yaffs_guts.c:1488:6: warning: variable 'pushout' set but not used [-Wunused-but-set-variable] yaffs_guts.c: In function 'yaffs_check_obj_details_loaded': yaffs_guts.c:3180:6: warning: variable 'alloc_failed' set but not used [-Wunused-but-set-variable] yaffs_guts.c:3179:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_guts.c: In function 'yaffs_update_oh': yaffs_guts.c:3288:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_guts.c: In function 'yaffs_get_obj_name': yaffs_guts.c:4447:7: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_summary.c: In function 'yaffs_summary_read': yaffs_summary.c:194:6: warning: variable 'sum_tags_bytes' set but not used [-Wunused-but-set-variable] yaffs_verify.c: In function 'yaffs_verify_file': yaffs_verify.c:227:6: warning: variable 'actual_depth' set but not used [-Wunused-but-set-variable] yaffs_yaffs1.c: In function 'yaffs1_scan': yaffs_yaffs1.c:26:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_yaffs2.c: In function 'yaffs2_scan_chunk': yaffs_yaffs2.c:949:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_yaffs2.c: In function 'yaffs2_scan_backwards': yaffs_yaffs2.c:1352:6: warning: variable 'deleted' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Charles Manning <cdhmanning@gmail.com> Tested-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2012-10-08FAT: check for partition 0 not 1 for whole-disk fsStephen Warren
The recent switch to use get_device_and_partition() from do_fat_ls() broke the ability to access a FAT filesystem directly on a whole device; FAT only works within a partition on a device. This change makes e.g. "fatls mmc 0:0" work; explicitly requesting partition ID 0 is something that get_device_and_partition() fully supports. However, fat_register_device() expects partition ID 1 to be used in the full-disk case; partition ID 1 was previously implicitly specified when the user didn't actually specify a partition ID. Update fat_register_device() to expect the correct ID. This change does imply that if a user explicitly executes "fatls mmc 0:1" then this will fail, and may be a change in behaviour. Note that this still prevents "fatls mmc 0:auto" from working. The next patch will fix that. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-03ext4: Rename block group descriptor table from gd to bgdSimon Glass
On x86 machines gd is unfortunately a #define, so we should avoid using gd for anything. This patch changes uses of gd to bgd so that ext4fs can be used on x86. A better fix would be to remove the #define in x86, but I'm not sure how to do that. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-09-26FAT: Make it possible to read from any file positionBenoît Thébaudeau
When storage devices contain files larger than the embedded RAM, it is useful to be able to read these files by chunks, e.g. for a software update to the embedded NAND Flash from an external storage device (USB stick, SD card, etc.). Hence, this patch makes it possible by adding a new FAT API to read files from a given position. This patch also adds this feature to the fatload command. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
2012-09-25cmd_reiser: use common get_device_and_partition functionRob Herring
Convert reiserload and reiserls to use common device and partition parsing function. With the common function "dev:part" can come from the environment and a '-' can be used in that case. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-09-25cmd_zfs: use common get_device_and_partition functionRob Herring
Convert zfsload and zfsls to use common device and partition parsing function. With the common function "dev:part" can come from the environment and a '-' can be used in that case. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-09-25cmd_extX: use common get_device_and_partition functionRob Herring
Convert ext2/4 load, ls, and write functions to use common device and partition parsing function. With the common function "dev:part" can come from the environment and a '-' can be used in that case. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-09-25ext4: remove init_fs/deinit_fsRob Herring
There's no real need to expose this and it can be removed by using a static allocation. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-09-20Merge branch 'ext4'Tom Rini
Update Makefile change for LIBS -> LIBS-y change. Conflicts: Makefile Signed-off-by: Tom Rini <trini@ti.com>
2012-09-20ext4: cache-align buffers so the invalidation worksStephen Warren
DMA buffer cache invalidation requires that buffers have cache-aligned buffer locations and sizes. Use memalign() and ALLOC_CACHE_ALIGN_BUFFER() to ensure this. On Tegra at least, without this fix, the following fail commands fail in u-boot-master/ext4, but succeeded at the branch's branch point in u-boot/master. With this fix, the commands work again: ext2ls mmc 0:1 / ext2load mmc 0:1 /boot/zImage Cc: Uma Shankar <uma.shankar@samsung.com> Cc: Manjunatha C Achar <a.manjunatha@samsung.com> Cc: Iqbal Shareef <iqbal.ams@samsung.com> Cc: Hakgoo Lee <goodguy.lee@samsung.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Tom Rini <trini@ti.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-18FAT: Fix file contents listed as directoryBenoît Thébaudeau
With: fatls mmc 0 /dir/file dir: regular directory file: regular file The previous code read the contents of file as if it were directory entries to list. This patch refuses to list file contents as if it were a folder. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
2012-09-10ubifs: Fix ubifsload when using ZLIBVeli-Pekka Peltola
Using ZLIB compression with UBIFS fails if last data node is not a size of UBIFS_BLOCK_SIZE (4096 bytes). Easiest way to test this is trying to read a file smaller than 4k: => ubifsload 41000000 /etc/fstab Loading file '/etc/fstab' to addr 0x41000000 with size 704 (0x000002c0)... UBIFS error (pid 0): read_block: bad data node (block 0, inode 2506) UBIFS error (pid 0): do_readpage: cannot read page 0 of inode 2506, error -22 Error reading file '/etc/fstab' /etc/fstab not found! exit not allowed from main input shell. => With this patch: => ubifsload 41000000 /etc/fstab Loading file '/etc/fstab' to addr 0x41000000 with size 704 (0x000002c0)... Done => Signed-off-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com> Cc: kmpark@infradead.org Tested-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2012-09-03ubifs: Fix memory leak in ubifs_finddirStefan Roese
This patch fixes a memory leak in ubifs_finddir(). Signed-off-by: Stefan Roese <sr@denx.de> Cc: dev.ma.dma@gmail.com
2012-09-02FAT: Simplify get_contentsBenoît Thébaudeau
One call to get_cluster can be factorized with another, so avoid duplicating code. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
2012-09-02FAT: get_cluster: Add buffer bouncingBenoît Thébaudeau
Add a buffer bouncing mechanism to get_cluster. This can be useful for misaligned applicative buffers passed through get_contents. This is required for the following patches in the case of data aligned differently relatively to buffers and clusters. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
2012-09-02FAT: Fix redundant sector readBenoît Thébaudeau
With the previous code, the remaining prefetched sectors were read again after each sector. With this patch, each sector is read only once, thus making the prefetch useful. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
2012-09-02FAT: cosmetic: Remove useless assignmentBenoît Thébaudeau
fatlength is not used after this assignment, so it is useless and can be removed. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
2012-09-02FAT: get_fatent: Fix FAT boundary checkBenoît Thébaudeau
startblock must be taken into account in order not to read past the end of the FAT. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
2012-09-02FAT: cosmetic: Remove extra spacesBenoît Thébaudeau
Remove spaces before opening parentheses in function calls. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
2012-09-02u-boot yaffs2: Fix compilation warningsCharles Manning
Also remove yaffs_hweight and use the hweight in u-boot. Signed-off-by: Charles Manning <cdhmanning@gmail.com>
2012-08-09ext4fs write supportUma Shankar
Signed-off-by: Uma Shankar <uma.shankar@samsung.com> Signed-off-by: Manjunatha C Achar <a.manjunatha@samsung.com> Signed-off-by: Iqbal Shareef <iqbal.ams@samsung.com> Signed-off-by: Hakgoo Lee <goodguy.lee@samsung.com>
2012-08-09ext4fs ls load supportUma Shankar
Signed-off-by: Uma Shankar <uma.shankar@samsung.com> Signed-off-by: Manjunatha C Achar <a.manjunatha@samsung.com> Signed-off-by: Iqbal Shareef <iqbal.ams@samsung.com> Signed-off-by: Hakgoo Lee <goodguy.lee@samsung.com>
2012-08-09zfs: Add ZFS filesystem supportJorgen Lundman
U-Boot port is based on sources forked from GRUB-0.97 by Sun in 2004, which can be found here: http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/grub/grub-0.97/stage2/zfs-include/zfs.h Released by Sun for GRUB under the license: * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. GRUB official releases include ZFS in version: ftp://alpha.gnu.org/gnu/grub/grub-1.99~rc1.tar.gz And patched against GRUB Bazaar repository for ashift fixes (4KB HDDs) more conveniently found at github: https://github.com/pendor/grub-zfs/commit/e7b6ef3ac3b9685ac4c394c897b1d4221b7381f1 Signed-off-by: Jorgen Lundman <lundman@lundman.net>
2012-08-09u-boot: Update yaffs2 file systemCharles Manning
This patch updates the yaffs2 in u-boot to correspond to git://www.aleph1.co.uk/yaffs2 commit id 9ee5d0643e559568dbe62215f76e0a7bd5a63d93 Signed-off-by: Charles Manning <cdhmanning@gmail.com>
2012-08-09UBIFS: Improve error message when reading superblock failedBernhard Walle
In addition to the error message also display the error code. I had the problem that my malloc memory was not enough (ENOMEM), and if u-boot had displayed the error code immediately that would have saved me some debugging. Signed-off-by: Bernhard Walle <walle@corscience.de> Use ubifs_err instead of printf. Add "errno=%d" in output as suggested by Albert Aribaud. Signed-off-by: Thomas Weber <weber@corscience.de>
2012-08-07ext2fs: fix warning: 'blocknxt' may be used uninitialized with gcc 4.2Tom Rini
The above warning was introduced originally in 436da3c "ext2load: increase read speed" and fixed for newer toolchains in b803273 "ext2fs: fix warning: 'blocknxt' may be used uninitialized". This change did not fix the warning with gcc 4.2, as found in ELDK 4.2. If we rework the while loop to initalize blocknxt before entering the warning really goes away. Tested on am335x with an approx 7mb file and crc32 in U-Boot befor and after this change. Cc: Wolfgang Denk <wd@denx.de> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Jason Cooper <u-boot@lakedaemon.net> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Cc: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Tom Rini <trini@ti.com>
2012-07-08ext2fs: fix warning: 'blocknxt' may be used uninitializedKim Phillips
This warning was introduced in 436da3c "ext2load: increase read speed": ext2fs.c: In function 'ext2fs_read_file': ext2fs.c:458:19: warning: 'blocknxt' may be used uninitialized in this function [-Wuninitialized] this change makes it go away. Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Jason Cooper <u-boot@lakedaemon.net> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-06-21ext2load: increase read speedu-boot@lakedaemon.net
This patch dramatically drops the amount of time u-boot needs to read a file from an ext2 partition. On a typical 2 to 5 MB file (kernels and initrds) it goes from tens of seconds to a couple seconds. All we are doing here is grouping contiguous blocks into one read. Boot tested on Globalscale Technologies Dreamplug (Kirkwood ARM SoC) with three different files. sha1sums were calculated in Linux userspace, and then confirmed after ext2load. Signed-off-by: Jason Cooper <u-boot@lakedaemon.net> Tested-by: Eric Nelson <eric.nelson@boundarydevices.com> Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-06-21Block: Remove MG DISK supportMarek Vasut
This driver is unused and obsolete. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: unsik Kim <donari75@gmail.com>
2012-04-30linux/compat.h: rename from linux/mtd/compat.hMike Frysinger
This lets us use it in more places than just mtd code. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-04-30gunzip: rename z{alloc, free} to gz{alloc, free}Mike Frysinger
This allows us to add a proper zalloc() func (one that does a zeroing alloc), and removes duplicate prototypes. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-04-30fs/fat: align disk buffers on cache line to enable DMA and cacheEric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-03-26fs/fat/fat_write.c: Fix GCC 4.6 warningsAnatolij Gustschin
Fix: fat_write.c: In function 'find_directory_entry': fat_write.c:826:8: warning: variable 'prevcksum' set but not used [-Wunused-but-set-variable] fat_write.c: In function 'do_fat_write': fat_write.c:933:6: warning: variable 'root_cluster' set but not used [-Wunused-but-set-variable] fat_write.c:925:12: warning: variable 'slotptr' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Donggeun Kim <dg77.kim@samsung.com> Acked-by: Maximilian Schwerin <mvs@tigris.de> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-03-24FAT write: Fix compile errorsDonggeun Kim
This patch removes compile errors introduced by commit 9813b750f32c0056f0a35813b9a9ec0f68b664af 'fs/fat: Fix FAT detection to support non-DOS partition tables' fat_write.c: In function 'disk_write': fat_write.c:54: error: 'part_offset' undeclared (first use in this function) fat_write.c:54: error: (Each undeclared identifier is reported only once fat_write.c:54: error: for each function it appears in.) fat_write.c: In function 'do_fat_write': fat_write.c:950: error: 'part_size' undeclared (first use in this function) These errors only appear when this code is enabled by defining CONFIG_FAT_WRITE option. This patch was originally part of http://article.gmane.org/gmane.comp.boot-loaders.u-boot/121847 Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Maximilian Schwerin <mvs@tigris.de> Fixed patch author and added all needed SoB from the original patch and also submitter's SoB. Extended commit log. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2012-01-05FAT: update the second FAT when writing a fileDonggeun Kim
After susccessful write to the FAT partition, fsck program may print warning message due to different FAT, provided that the filesystem supports two FATs. This patch makes the second FAT to be same with the first one when writing a file. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-01-05fs/fat: Improve error handlingKyle Moffett
The FAT filesystem fails silently in inexplicable ways when given a filesystem with a block-size that does not match the device sector size. In theory this is not an unsupportable combination but requires a major rewrite of a lot of the filesystem. Until that occurs, the filesystem should detect that scenario and display a helpful error message. This scenario in particular occurred on a 512-byte blocksize FAT fs stored in an El-Torito boot volume on a CD-ROM (2048-byte sector size). Additionally, in many circumstances the ->block_read method will not return a negative number to indicate an error but instead return 0 to indicate the number of blocks successfully read (IE: None). The FAT filesystem should defensively check to ensure that it got all of the sectors that it asked for when reading. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
2012-01-05fs/fat: Fix FAT detection to support non-DOS partition tablesKyle Moffett
The FAT filesystem code currently ends up requiring that the partition table be a DOS MBR, as it checks for the DOS 0x55 0xAA signature on the partition table (which may be Mac, EFI, ISO9660, etc) before actually computing the partition offset. This fixes support for accessing a FAT filesystem in an ISO9660 boot volume (El-Torito format) by reordering the filesystem checks and reading the 0x55 0xAA "DOS boot signature" and FAT/FAT32 magic number from the first sector of the partition instead of from sector 0. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Fix build warning: fat.c: In function 'fat_register_device': fat.c:66:15: warning: variable 'found_partition' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-01-05ext2: Cache line align indirection buffersSimon Glass
Make ext2 use cache line aligned buffers for reading from the filesystem. This is needed when caches are enabled because unaligned cache invalidates are not safe. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-01-05fat: reset VFAT short alias checksum on first matchSergei Shtylyov
The VFAT short alias checksum read from a long file name is only overwritten when another long file name appears in a directory list. Until then it renders short file names invisible that have the same checksum. Reset the checksum on first match. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Martin Mueller <martin.mueller5@de.bosch.com>
2011-12-23Merge branch 'next' of ../nextWolfgang Denk
* 'next' of ../next: mkenvimage: Add version info switch (-V) mkenvimage: Fix getopt() error handling mkenvimage: Fix some typos phy: add Micrel KS8721BL phy definition net: introduce per device index mvgbe: remove setting of ethaddr within the driver x86: Add support for specifying an initrd with the zboot command x86: Refactor the zboot innards so they can be reused with a vboot image x86: Add infrastructure to extract an e820 table from the coreboot tables x86: Add support for booting Linux using the 32 bit boot protocol x86: Clean up the x86 zimage code in preparation to extend it x86: Import code from coreboot's libpayload to parse the coreboot table x86: Initial commit for running as a coreboot payload CHECKPATCH: ./board/esd/hh405/logo_320_240_8bpp.c CHECKPATCH: ./board/esd/hh405/logo_1024_768_8bpp.c CHECKPATCH: ./board/esd/hh405/logo_320_240_4bpp.c CHECKPATCH: ./board/esd/hh405/logo_640_480_24bpp.c CHECKPATCH: ./board/esd/apc405/logo_640_480_24bpp.c CHECKPATCH: ./board/esd/voh405/logo_320_240_4bpp.c CHECKPATCH: ./board/esd/voh405/logo_640_480_24bpp.c CHECKPATCH: ./board/esd/hh405/fpgadata.c CHECKPATCH: ./board/esd/pci405/fpgadata.c CHECKPATCH: ./board/esd/tasreg/fpgadata.c CHECKPATCH: ./board/esd/apc405/fpgadata.c CHECKPATCH: ./board/esd/voh405/fpgadata.c CHECKPATCH: ./board/esd/ash405/fpgadata.c CHECKPATCH: ./board/esd/dasa_sim/fpgadata.c CHECKPATCH: ./board/esd/ar405/fpgadata_xl30.c CHECKPATCH: ./board/esd/ar405/fpgadata.c CHECKPATCH: ./board/esd/plu405/fpgadata.c CHECKPATCH: ./board/esd/wuh405/fpgadata.c CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405.c CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405ab.c CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci4052.c CHECKPATCH: ./board/esd/canbt/fpgadata.c CHECKPATCH: ./board/esd/du405/fpgadata.c CHECKPATCH: ./board/esd/cpciiser4/fpgadata.c CHECKPATCH: ./board/dave/PPChameleonEVB/fpgadata.c avr32:mmu.c: fix printf() length modifier fat.c: fix printf() length modifier cmd_sf.c: fix printf() length modifier Make printf and vprintf safe from buffer overruns vsprintf: Move function documentation into header file Add safe vsnprintf and snprintf library functions Move vsprintf functions into their own header Conflicts: tools/mkenvimage.c Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-12-20FAT: fix some issues in FAT write support codeAnatolij Gustschin
Writing a file to the FAT partition didn't work while a test using a CF card. The test was done on mpc5200 based board (powerpc). There is a number of problems in FAT write code: Compiler warning: fat_write.c: In function 'file_fat_write': fat_write.c:326: warning: 'counter' may be used uninitialized in this function fat_write.c:326: note: 'counter' was declared here 'l_filename' string is not terminated, so a file name with garbage at the end is used as a file name as shown by debug code. Return value of set_contents() is not checked properly so actually a file won't be written at all (as checked using 'fatls' after a write attempt with 'fatwrite' command). do_fat_write() doesn't return the number of written bytes if no error happened. However the return value of this function is used to show the number of written bytes in do_fat_fswrite(). The patch adds some debug code and fixes above mentioned problems and also fixes a typo in error output. NOTE: after a successful write to the FAT partition (under U-Boot) the partition was checked under Linux using fsck. The partition needed fixing FATs: -bash-3.2# fsck -a /dev/sda1 fsck 1.39 (29-May-2006) dosfsck 2.11, 12 Mar 2005, FAT32, LFN FATs differ but appear to be intact. Using first FAT. Performing changes. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Donggeun Kim <dg77.kim@samsung.com> Cc: Aaron Williams <Aaron.Williams@cavium.com> Acked-by: Donggeun Kim <dg77.kim@samsung.com>
2011-12-17fat.c: fix printf() length modifierAndreas Bießmann
The DIRENTSPERBLOCK utilizes sizeof() which will return a size_t which has no fixed size. Therefor use correct length modifer for printf() statement to prevent compiler warnings. This patch fixes following warning: ---8<--- fat.c: In function 'do_fat_read': fat.c:879: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int' --->8--- Signed-off-by: Andreas Bießmann <biessmann@corscience.de> cc: Mike Frysinger <vapier@gentoo.org> cc: Thomas Chou <thomas@wytron.com.tw> cc: rjones@nexus-tech.net cc: kharris@nexus-tech.net Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-12-12fs/reiserfs/reiserfs.c: Fix compiler warningAnatolij Gustschin
Fix: reiserfs.c: In function 'reiserfs_mount': reiserfs.c:360:22: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-12-10fs/yaffs2/yaffs_guts.c: Fix GCC 4.6 compile warning (and bug)Wolfgang Denk
Fix: yaffs_guts.c: In function 'yaffs_GarbageCollectBlock': yaffs_guts.c:2761:6: warning: variable 'retVal' set but not used [-Wunused-but-set-variable] Here GCC actually detected a bug. The code was always returning OK instead of the previously set retrun code. Fix that. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: William Juul <wiljuul@cisco.com> Cc: Scott Wood <scottwood@freescale.com> Acked-by: William Juul <wiljuul@cisco.com>
2011-11-16Fix warnings in yaffsSimon Glass
Sorry if this is already fixed somewhere - I could not find it. This fixes the warnings show below. yaffs_tagscompat.c: In function 'yaffs_TagsCompatabilityReadChunkWithTagsFromNAND': yaffs_tagscompat.c:151: warning: dereferencing pointer 'tu' does break strict-aliasing rules yaffs_tagscompat.c:150: warning: dereferencing pointer 'tu' does break strict-aliasing rules yaffs_tagscompat.c:149: warning: dereferencing pointer 'tu' does break strict-aliasing rules yaffs_tagscompat.c:148: warning: dereferencing pointer 'tu' does break strict-aliasing rules yaffs_tagscompat.c:147: warning: dereferencing pointer 'tu' does break strict-aliasing rules yaffs_tagscompat.c:146: warning: dereferencing pointer 'tu' does break strict-aliasing rules yaffs_tagscompat.c:145: warning: dereferencing pointer 'tu' does break strict-aliasing rules yaffs_tagscompat.c:144: warning: dereferencing pointer 'tu' does break strict-aliasing rules yaffs_tagscompat.c:141: note: initialized from here Signed-off-by: Simon Glass <sjg@chromium.org>
2011-11-16fs/yaffs2/yaffs_guts.c: Fix some GCC 4.6 warningsAnatolij Gustschin
Fix: yaffs_guts.c: In function 'yaffs_CheckChunkErased': yaffs_guts.c:854:6: warning: variable 'result' set but not used yaffs_guts.c: In function 'yaffs_UpdateObjectHeader': yaffs_guts.c:3463:6: warning: variable 'result' set but not used yaffs_guts.c: In function 'yaffs_GrabChunkCache': yaffs_guts.c:3774:6: warning: variable 'pushout' set but not used yaffs_guts.c: In function 'yaffs_Scan': yaffs_guts.c:5237:6: warning: variable 'result' set but not used yaffs_guts.c: In function 'yaffs_CheckObjectDetailsLoaded': yaffs_guts.c:5748:6: warning: variable 'alloc_failed' set but not used yaffs_guts.c:5747:6: warning: variable 'result' set but not used yaffs_guts.c: In function 'yaffs_ScanBackwards': yaffs_guts.c:5808:6: warning: variable 'deleted' set but not used yaffs_guts.c:5806:6: warning: variable 'result' set but not used yaffs_guts.c: In function 'yaffs_GetObjectName': yaffs_guts.c:6657:7: warning: variable 'result' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-07fs/fat/fat.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: fat.c: In function 'fat_register_device': fat.c:74:19: warning: variable 'info' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-10-27GCC4.6: Squash warnings in yaffs_guts.cMarek Vasut
yaffs_guts.c: In function 'yaffs_ReadDataFromFile': yaffs_guts.c:4461:8: warning: 'chunk' may be used uninitialized in this function yaffs_guts.c:4462:8: warning: 'start' may be used uninitialized in this function yaffs_guts.c: In function 'yaffs_WriteDataToFile': yaffs_guts.c:4581:8: warning: 'chunk' may be used uninitialized in this function yaffs_guts.c:4582:8: warning: 'start' may be used uninitialized in this function yaffs_guts.c: In function 'yaffs_ResizeFile': yaffs_guts.c:4816:8: warning: 'newSizeOfPartialChunk' may be used uninitialized in this function yaffs_guts.c:4817:8: warning: 'newFullChunks' may be used uninitialized in this function Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: William Juul <william.juul@tandberg.com>
generated by cgit (git 2.34.1) at 2024-12-26 07:43:59 +0000