summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2020-05-01fs: ext4: avoid NULL check before free()Heinrich Schuchardt
free() checks if its argument is NULL. Don't duplicate this in the calling code. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-27fs: ext4: skip journal state if fs has metadata_csumArnaud Ferraris
As u-boot doesn't support the metadata_csum feature, writing to a filesystem with this feature enabled will fail, as expected. However, during the process, a journal state check is performed, which could result in: - a fs recovery if the fs wasn't umounted properly - the fs being marked dirty Both these cases result in a superblock change, leading to a mismatch between the superblock checksum and its contents. Therefore, Linux will consider the filesystem heavily corrupted and will require e2fsck to be run manually to boot. By bypassing the journal state check, this patch ensures the superblock won't be corrupted if the filesystem has metadata_csum feature enabled. Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
2020-04-20fs: btrfs: support sparse extentsMarek Behún
When logical address of a regular extent is 0, the extent is sparse and consists of all zeros. Without this when sparse extents are used in a file reading fails with Cannot map logical address 0 to physical Signed-off-by: Marek Behún <marek.behun@nic.cz>
2020-04-16fs: btrfs: Fix LZO false decompression error caused by pending zeroQu Wenruo
For certain btrfs files with compressed file extent, uboot will fail to load it: btrfs_read_extent_reg: disk_bytenr=14229504 disk_len=73728 offset=0 nr_bytes=131 072 decompress_lzo: tot_len=70770 decompress_lzo: in_len=1389 decompress_lzo: in_len=2400 decompress_lzo: in_len=3002 decompress_lzo: in_len=1379 decompress_lzo: in_len=88539136 decompress_lzo: header error, in_len=88539136 clen=65534 tot_len=62580 NOTE: except the last line, all other lines are debug output. Btrfs lzo compression uses its own format to record compressed size (segment header, LE32). However to make decompression easier, we never put such segment header across page boundary. In above case, the xxd dump of the lzo compressed data looks like this: 00001fe0: 4cdc 02fc 0bfd 02c0 dc02 0d13 0100 0001 L............... 00001ff0: 0000 0008 0300 0000 0000 0011 0000|0000 ................ 00002000: 4705 0000 0001 cc02 0000 0000 0000 1e01 G............... '|' is the "expected" segment header start position. But in that page, there are only 2 bytes left, can't contain the 4 bytes segment header. So btrfs compression will skip that 2 bytes, put the segment header in next page directly. Uboot doesn't have such check, and read the header with 2 bytes offset, result 0x05470000 (88539136), other than the expected result 0x00000547 (1351), resulting above error. Follow the btrfs-progs restore implementation, by introducing tot_in to record total processed bytes (including headers), and do proper page boundary skip to fix it. Please note that, current code base doesn't parse fs_info thus we can't grab sector size easily, so it uses PAGE_SIZE, and relying on fs open time check to exclude unsupported sector size. Signed-off-by: Qu Wenruo <wqu@suse.com> Cc: Marek Behun <marek.behun@nic.cz> Reviewed-by: Marek Behún <marek.behun@nic.cz>
2020-04-16fs: btrfs: Reject fs with sector size other than PAGE_SIZEQu Wenruo
Although in theory u-boot fs driver could easily support more sector sizes, current code base doesn't have good enough way to grab sector size yet. This would cause problem for later LZO fixes which rely on sector size. And considering that most u-boot boards are using 4K page size, which is also the most common sector size for btrfs, rejecting fs with non-page-sized sector size shouldn't cause much problem. This should only be a quick fix before we implement better sector size support. Signed-off-by: Qu Wenruo <wqu@suse.com> Cc: Marek Behun <marek.behun@nic.cz> Reviewed-by: Marek Behún <marek.behun@nic.cz>
2020-04-16fs: btrfs: Use LZO_LEN to replace immediate numberQu Wenruo
Just a cleanup. These immediate numbers make my eyes hurt. Signed-off-by: Qu Wenruo <wqu@suse.com> Cc: Marek Behun <marek.behun@nic.cz> Reviewed-by: Marek Behún <marek.behun@nic.cz>
2020-03-27fs: ext4: Fix alignment of cache buffersJan Kiszka
We need to align the cache buffer to ARCH_DMA_MINALIGN in order to avoid access errors like CACHE: Misaligned operation at range [be0231e0, be0235e0] seen on the MCIMX7SABRE. Fixes: d5aee659f217 ("fs: ext4: cache extent data") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-02-11Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dmTom Rini
sandbox conversion to SDL2 TPM TEE driver Various minor sandbox video enhancements New driver model core utility functions
2020-02-07fat: write: adjust data written in each partial writeMarek Szyprowski
The code for handing file overwrite incorrectly calculated the amount of data to write when writing to the last non-cluster aligned chunk. Fix this by ensuring that no more data than the 'filesize' is written to disk. While touching min()-based calculations, change it to type-safe min_t() function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> This patch finally fixes the issue revealed by the test script from the previous patch. The correctness of the change has been also verified by the following additional test scripts: --->8-fat_test2.sh--- #!/bin/bash make sandbox_defconfig make dd if=/dev/zero of=/tmp/10M.img bs=1024 count=10k mkfs.vfat -v /tmp/10M.img cat >/tmp/cmds <<EOF x host bind 0 /tmp/10M.img fatls host 0 mw 0x1000000 0x0a434241 0x1000 # "ABC\n" mw 0x1100000 0x0a464544 0x8000 # "DEF\n" fatwrite host 0 0x1000000 file0001.raw 0x1000 fatwrite host 0 0x1000000 file0002.raw 0x1000 fatwrite host 0 0x1000000 file0003.raw 0x1000 fatwrite host 0 0x1000000 file0004.raw 0x1000 fatwrite host 0 0x1000000 file0005.raw 0x1000 fatrm host 0 file0002.raw fatrm host 0 file0004.raw fatls host 0 fatwrite host 0 0x1100000 file0007.raw 0x2000 fatwrite host 0 0x1100000 file0007.raw 0x1f00 reset EOF ./u-boot </tmp/cmds #verify rm -r /tmp/result /tmp/model mkdir /tmp/result mkdir /tmp/model yes ABC | head -c 4096 >/tmp/model/file0001.raw yes ABC | head -c 4096 >/tmp/model/file0003.raw yes ABC | head -c 4096 >/tmp/model/file0005.raw yes DEF | head -c 7936 >/tmp/model/file0007.raw mcopy -n -i /tmp/10M.img ::file0001.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0003.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0005.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0007.raw /tmp/result hd /tmp/10M.img if diff -urq /tmp/model /tmp/result then echo Test okay else echo Test fail fi --->8-fat_test3.sh--- #!/bin/bash make sandbox_defconfig make dd if=/dev/zero of=/tmp/10M.img bs=1024 count=10k mkfs.vfat -v /tmp/10M.img cat >/tmp/cmds <<EOF x host bind 0 /tmp/10M.img fatls host 0 mw 0x1000000 0x0a434241 0x1000 # "ABC\n" mw 0x1100000 0x0a464544 0x8000 # "DEF\n" fatwrite host 0 0x1000000 file0001.raw 0x1000 fatwrite host 0 0x1000000 file0002.raw 0x1000 fatwrite host 0 0x1000000 file0003.raw 0x1000 fatwrite host 0 0x1000000 file0004.raw 0x1000 fatwrite host 0 0x1000000 file0005.raw 0x1000 fatrm host 0 file0002.raw fatrm host 0 file0004.raw fatls host 0 fatwrite host 0 0x1100000 file0007.raw 0x2000 fatwrite host 0 0x1100000 file0007.raw 0x2100 reset EOF ./u-boot </tmp/cmds #verify rm -r /tmp/result /tmp/model mkdir /tmp/result mkdir /tmp/model yes ABC | head -c 4096 >/tmp/model/file0001.raw yes ABC | head -c 4096 >/tmp/model/file0003.raw yes ABC | head -c 4096 >/tmp/model/file0005.raw yes DEF | head -c 8448 >/tmp/model/file0007.raw mcopy -n -i /tmp/10M.img ::file0001.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0003.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0005.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0007.raw /tmp/result hd /tmp/10M.img if diff -urq /tmp/model /tmp/result then echo Test okay else echo Test fail fi --->8-fat_test4.sh--- #!/bin/bash make sandbox_defconfig make dd if=/dev/zero of=/tmp/10M.img bs=1024 count=10k mkfs.vfat -v /tmp/10M.img cat >/tmp/cmds <<EOF x host bind 0 /tmp/10M.img fatls host 0 mw 0x1000000 0x0a434241 0x1000 # "ABC\n" mw 0x1100000 0x0a464544 0x8000 # "DEF\n" mw 0x1200000 0x0a494847 0x8000 # "GHI\n" fatwrite host 0 0x1000000 file0001.raw 0x1000 fatwrite host 0 0x1000000 file0002.raw 0x1000 fatwrite host 0 0x1000000 file0003.raw 0x1000 fatwrite host 0 0x1000000 file0004.raw 0x1000 fatwrite host 0 0x1000000 file0005.raw 0x1000 fatrm host 0 file0002.raw fatrm host 0 file0004.raw fatls host 0 fatwrite host 0 0x1100000 file0007.raw 0x900 fatwrite host 0 0x1200000 file0007.raw 0x900 0x900 fatwrite host 0 0x1100000 file0007.raw 0x900 0x1200 fatwrite host 0 0x1200000 file0007.raw 0x900 0x1b00 reset EOF ./u-boot </tmp/cmds #verify rm -r /tmp/result /tmp/model mkdir /tmp/result mkdir /tmp/model yes ABC | head -c 4096 >/tmp/model/file0001.raw yes ABC | head -c 4096 >/tmp/model/file0003.raw yes ABC | head -c 4096 >/tmp/model/file0005.raw yes DEF | head -c 2304 >/tmp/model/file0007.raw yes GHI | head -c 2304 >>/tmp/model/file0007.raw yes DEF | head -c 2304 >>/tmp/model/file0007.raw yes GHI | head -c 2304 >>/tmp/model/file0007.raw mcopy -n -i /tmp/10M.img ::file0001.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0003.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0005.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0007.raw /tmp/result hd /tmp/10M.img if diff -urq /tmp/model /tmp/result then echo Test okay else echo Test fail fi --->8--- Feel free to prepare a proper sandbox/py_test based tests based on the provided test scripts.
2020-02-07fat: write: fix broken write to fragmented filesMarek Szyprowski
The code for handing file overwrite incorrectly assumed that the file on disk is always contiguous. This resulted in corrupting disk structure every time when write to existing fragmented file happened. Fix this by adding proper check for cluster discontinuity and adjust chunk size on each partial write. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> This patch partially fixes the issue revealed by the following test script: --->8-fat_test1.sh--- #!/bin/bash make sandbox_defconfig make dd if=/dev/zero of=/tmp/10M.img bs=1024 count=10k mkfs.vfat -v /tmp/10M.img cat >/tmp/cmds <<EOF x host bind 0 /tmp/10M.img fatls host 0 mw 0x1000000 0x0a434241 0x1000 # "ABC\n" mw 0x1100000 0x0a464544 0x8000 # "DEF\n" fatwrite host 0 0x1000000 file0001.raw 0x1000 fatwrite host 0 0x1000000 file0002.raw 0x1000 fatwrite host 0 0x1000000 file0003.raw 0x1000 fatwrite host 0 0x1000000 file0004.raw 0x1000 fatwrite host 0 0x1000000 file0005.raw 0x1000 fatrm host 0 file0002.raw fatrm host 0 file0004.raw fatls host 0 fatwrite host 0 0x1100000 file0007.raw 0x4000 fatwrite host 0 0x1100000 file0007.raw 0x4000 reset EOF ./u-boot </tmp/cmds #verify rm -r /tmp/result /tmp/model mkdir /tmp/result mkdir /tmp/model yes ABC | head -c 4096 >/tmp/model/file0001.raw yes ABC | head -c 4096 >/tmp/model/file0003.raw yes ABC | head -c 4096 >/tmp/model/file0005.raw yes DEF | head -c 16384 >/tmp/model/file0007.raw mcopy -n -i /tmp/10M.img ::file0001.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0003.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0005.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0007.raw /tmp/result hd /tmp/10M.img if diff -urq /tmp/model /tmp/result then echo Test okay else echo Test fail fi --->8--- Overwritting a discontiguous test file (file0007.raw) no longer causes corruption to file0003.raw, which's data lies between the chunks of the test file. The amount of data written to disk is still incorrect, what causes damage to the file (file0005.raw), which's data lies next to the test file. This will be fixed by the next patch. Feel free to prepare a proper sandbox/py_test based tests based on the provided test scripts.
2020-02-05dm: core: Create a new header file for 'compat' featuresSimon Glass
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: core: Require users of devres to include the headerSimon Glass
At present devres.h is included in all files that include dm.h but few make use of it. Also this pulls in linux/compat which adds several more headers. Drop the automatic inclusion and require files to include devres themselves. This provides a good indication of which files use devres. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-12-06linux_compat: move kmemdup() from ubifs.c to linux_compat.cAKASHI Takahiro
linux_compat.c is the best place for kmemdup(), which is currenly used only in ubifs.c, but will also be used when other kernel files (in my case, lib/crypto/x509_cert_parser.c and pkcs7_parser.c) will be imported. So just move it. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-05fs: fat: handle deleted directory entries correctlyAKASHI Takahiro
Unlink test for FAT file system seems to fail at test_unlink2. (When I added this test, I haven't seen any errors though.) for example, ===8<=== fs_obj_unlink = ['fat', '/home/akashi/tmp/uboot_sandbox_test/128MB.fat32.img'] def test_unlink2(self, u_boot_console, fs_obj_unlink): """ Test Case 2 - delete many files """ fs_type,fs_img = fs_obj_unlink with u_boot_console.log.section('Test Case 2 - unlink (many)'): output = u_boot_console.run_command('host bind 0 %s' % fs_img) for i in range(0, 20): output = u_boot_console.run_command_list([ '%srm host 0:0 dir2/0123456789abcdef%02x' % (fs_type, i), '%sls host 0:0 dir2/0123456789abcdef%02x' % (fs_type, i)]) assert('' == ''.join(output)) output = u_boot_console.run_command( '%sls host 0:0 dir2' % fs_type) > assert('0 file(s), 2 dir(s)' in output) E AssertionError: assert '0 file(s), 2 dir(s)' in ' ./\r\r\n ../\r\r\n 0 0123456789abcdef11\r\r\n\r\r\n1 file(s), 2 dir(s)' test/py/tests/test_fs/test_unlink.py:52: AssertionError ===>8=== This can happen when fat_itr_next() wrongly detects an already- deleted directory entry. File deletion, which was added in the commit f8240ce95d64 ("fs: fat: support unlink"), is implemented by marking its entry for a short name with DELETED_FLAG, but related entry slots for a long file name are kept unmodified. (So entries will never be actually deleted from media.) To handle this case correctly, an additional check for a directory slot will be needed in fat_itr_next(). In addition, I added extra comments about long file name and short file name format in FAT file system. Although they are not directly related to the issue, I hope it will be helpful for better understandings in general. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-02common: Move sorting functions to their own header fileSimon Glass
These don't need to be in common.h so move them out into a new header. Also add some missing comments. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02crc32: Use the crc.h header for crc functionsSimon Glass
Drop inclusion of crc.h in common.h and use the correct header directly instead. With this we can drop the conflicting definition in fw_env.h and rely on the crc.h header, which is already included. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-10-17fs: add fs_get_type() for current filesystem typeAKASHI Takahiro
This function is a variant of fs_get_type_name() and returns a filesystem type with which the current device is associated. We don't want to export fs_type variable directly because we have to take care of it consistently within fs.c. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17fs: clean up around fs_typeAKASHI Takahiro
fs_ls(), fs_mkdir() and fs_unlink() sets fs_type to FS_TYPE_ANY explicitly, but it is redundant as they call fs_close(). So just remove those lines. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17fs: export fs_close()AKASHI Takahiro
fs_close() closes the connection to a file system which opened with either fs_set_blk_dev() or fs_set_dev_with_part(). Many file system functions implicitly call fs_close(), e.g. fs_closedir(), fs_exist(), fs_ln(), fs_ls(), fs_mkdir(), fs_read(), fs_size(), fs_write() and fs_unlink(). So just export it. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-11fs: fat: get_contents() always returns -1 for errorsHeinrich Schuchardt
If out of memory, return -1 and not -ENOMEM from get_contents(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-11fs: fat: treat invalid FAT clusters as errorsHeinrich Schuchardt
When hitting an invalid FAT cluster while reading a file always print an error message and return an error code. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-26fat: FAT filesystem premature release of info struct.Martin Vystrčil
File was found on specified location. Info about file was read, but then immediately destroyed using 'free' call. As a result file size was set to 0, hence fat process didn't read any data. Premature 'free' call removed. Resources are freed right before function return. File is read correctly. Signed-off-by: Martin Vystrcil <martin.vystrcil@m-linux.cz>
2019-08-20jffs2: remove unused code filesUwe Kleine-König
I failed to find where these two files are used and a few test compile runs with JFFS2 enabled succeeded also without these.
2019-08-18cbfs: Rename camel-case variablesSimon Glass
Rename some camel-case variables to match U-Boot style. Camel case is not generally allowed in U-Boot. Rename this variable to fit in with the style. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-18cbfs: Add functions to support multiple CBFSsSimon Glass
Sometimes an image has multiple CBFS. The current CBFS API is limited to handling only one at time. Also it keeps track of the CBFS internally in BSS, which does not work before relocation, for example. Add a few new functions to overcome these limitations. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-18cbfs: Move result variable into the structSimon Glass
Move the result variable into the struct also, so that it can be used when BSS is not available. Add a function to read it. Note that all functions sill use the BSS version of the data. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-18cbfs: Move static variables into a structSimon Glass
At present there are a number of static variables in BSS. This cannot work with SPL, at least until BSS is available in board_init_r(). Move the variables into a struct, so it is possible to malloc() it and use it before BSS is available. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-18cbfs: Move declarations above functionsSimon Glass
At present this file has a function at the top, above declarations. This is normally avoided, so fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-18cbfs: Allow CBFS to be used in SPLSimon Glass
Add a new Kconfig option to enable CBFS in SPL. This can be useful when the memory-init code is in CBFS. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-11env: Move env_set_hex() to env.hSimon Glass
Move env_set_hex() over to the new header file along with env_set_addr() which uses it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11common: Move gzip functions into a new gzip headerSimon Glass
As part of the effort to remove things from common.h, create a new header for the gzip functions. Move the function declarations to it and add missing documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-07-23cbfs: Rename checksum to attributes_offsetSimon Glass
It seems that this field has been renamed in later version of coreboot. Update it. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-18CVE-2019-13106: ext4: fix out-of-bounds memsetPaul Emge
In ext4fs_read_file in ext4fs.c, a memset can overwrite the bounds of the destination memory region. This patch adds a check to disallow this. Signed-off-by: Paul Emge <paulemge@forallsecure.com>
2019-07-18ext4: gracefully fail on divide-by-0Paul Emge
This patch checks for 0 in several ext4 headers and gracefully fails instead of raising a divide-by-0 exception. Signed-off-by: Paul Emge <paulemge@forallsecure.com>
2019-07-18CVE-2019-13104: ext4: check for underflow in ext4fs_read_filePaul Emge
in ext4fs_read_file, it is possible for a broken/malicious file system to cause a memcpy of a negative number of bytes, which overflows all memory. This patch fixes the issue by checking for a negative length. Signed-off-by: Paul Emge <paulemge@forallsecure.com>
2019-07-18CVE-2019-13105: ext4: fix double-free in ext4_cache_readPaul Emge
ext_cache_read doesn't null cache->buf, after freeing, which results in a later function double-freeing it. This patch fixes ext_cache_read to call ext_cache_fini instead of free. Signed-off-by: Paul Emge <paulemge@forallsecure.com>
2019-07-18ext4: add support for filesystems without JOURNALMarek Szyprowski
JOURNAL is optional for EXT4 (and EXT3) filesystems, so add support for skipping it. This fixes corrupting EXT4 volumes without JOURNAL after using uboot's 'ext4write' command. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-07-18ext4: fix calculating inode blkcount for non-512 blocksize filesystemsMarek Szyprowski
The block count entry in the EXT4 filesystem disk structures uses standard 512-bytes units for most of the typical files. The only exception are HUGE files, which use the filesystem block size, but those are not supported by uboot's EXT4 implementation anyway. This patch fixes the EXT4 code to use proper unit count for inode block count. This fixes errors reported by fsck.ext4 on disks with non-standard (i.e. 4KiB, in case of new flash drives) PHYSICAL block size after using 'ext4write' uboot's command. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-06-20fs: do_load: pass device path for efi payloadMian Yousaf Kaukab
fatload command can be used to load the EFI payload since EFI system partition is always a FAT partition. Call into EFI code from do_load() to set the device path from which the last binary was loaded. An EFI application like grub2 can’t find its configuration file without the device path set. Since device path is now set in do_load() there is no need to set it in do_load_wrapper() for the load command. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-28fs: fat: allocate a new cluster for root directory of fat32AKASHI Takahiro
Contrary to fat12/16, fat32 can have root directory at any location and its size can be expanded. Without this patch, root directory won't grow properly and so we will eventually fail to add files under root directory. Please note that this can happen even if you delete many files as deleted directory entries are not reclaimed but just marked as "deleted" under the current implementation. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-28fs: fat: flush a directory cluster properlyAKASHI Takahiro
When a long name directory entry is created, multiple directory entries may be occupied across a directory cluster boundary. Since only one directory cluster is cached in a directory iterator, a first cluster must be written back to device before switching over a second cluster. Without this patch, some added files may be lost even if you don't see any failures on write operation. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-28fs: fat: write to non-cluster-aligned root directoryAKASHI Takahiro
With the commit below, fat now correctly handles a file read under a non-cluster-aligned root directory of fat12/16. Write operation should be fixed in the same manner. Fixes: commit 9b18358dc05d ("fs: fat: fix reading non-cluster-aligned root directory") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Anssi Hannula <anssi.hannula@bitwise.fi> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-28fs: fat: Fix possible double free of fatbufAndrew F. Davis
fat_itr_root() allocates fatbuf so we free it on the exit path, if the function fails we should not free it, check the return value and skip freeing if the function fails. Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-05-28fs: fat: correct file name normalizationHeinrich Schuchardt
File names may not contain control characters (< 0x20). Simplify the coding. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-05fs: btrfs: add zstd decompression supportMarek Behún
This adds decompression support for Zstandard, which has been included in Linux btrfs driver for some time. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2019-05-03fs: btrfs: fix btrfs methods return values on failureMarek Behún
The btrfs implementation methods .ls(), .size() and .read() returns 1 on failure, but the command handlers expect values <0 on failure. For example if given a nonexistent path, the load command currently returns success, and hush scripting does not work. Fix this by setting return values of these methods to -1 instead of 1 on failure. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2019-05-03fs: btrfs: Do not print mount fail message when not btrfs filesystemMarek Behún
Other filesystem drivers don't do this. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2019-04-27Revert "fs: btrfs: fix false negatives in ROOT_ITEM search"Tom Rini
Per Pierre this change shouldn't have been applied as it was superseded by "fs: btrfs: fix btrfs_search_tree invalid results" which is also applied now as 1627e5e5985d. This reverts commit 633967f9818cb6a0e87ffa8cba33148a5bcc6edb. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-26fs: btrfs: fix btrfs_search_tree invalid resultsPierre Bourdon
btrfs_search_tree should return the first item in the tree that is greater or equal to the searched item. The search algorithm did not properly handle the edge case where the searched item is higher than the last item of the node but lower than the first item of the next node. Instead of properly returning the first item of the next node, it was returning an invalid path pointer (pointing to a non-existent item after the last item of the node + 1). This fixes two issues in the btrfs driver: - Looking for a ROOT_ITEM could fail if it was the first item of its leaf node. - Iterating through DIR_INDEX entries (for readdir) could fail if the first DIR_INDEX entry was the first item of a leaf node. Signed-off-by: Pierre Bourdon <delroth@gmail.com> Cc: Marek Behun <marek.behun@nic.cz>
2019-04-26fs: fat: Build only if CONFIG_FS_FAT=yIsmael Luceno Cortes
Signed-off-by: Ismael Luceno <ismael.luceno@silicon-gears.com>
generated by cgit (git 2.34.1) at 2024-12-24 01:39:48 +0000