summaryrefslogtreecommitdiff
path: root/include/configs/exynos5250-dt.h
AgeCommit message (Collapse)Author
2013-04-18Merge branch 'master' of git://git.denx.de/u-boot-arm into HEADTom Rini
Quick manual fixup to merge the USB boot related defines and TPM related defines. Conflicts: include/configs/exynos5250-dt.h Signed-off-by: Tom Rini <trini@ti.com>
2013-04-17Exynos5: Add support for USB download boot modeVivek Gautam
Exynos5250 supports secondary USB device boot mode. If the iROM fails to download u-boot from the primary boot device (such as SD or eMMC), it will try to retrieve from the secondary boot device (such as USB). Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-04-15Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2013-04-14smdk5250, snow: convert to CONFIG_SPL_MAX_FOOTPRINTAlbert ARIBAUD
This target wants to check full SPL size, BSS included. Remove CONFIG_SPL_MAX_SIZE definition and instead define CONFIG_SPL_MAX_FOOTPRINT. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-04-12exynos: Enable I2C TPM for smdk5250Simon Glass
This is used on some Exynos 5250 variants. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-04-01Exynos5: config: enable time commandAkshay Saraswat
This patch enables time command. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-03-29Exynos: config: Enable hash commandAkshay Saraswat
This enables hash command. Tested with command "hash sha256 0x40008000 0x2B 0x40009000". Used mm and md to write a standard string to memory location 0x40008000 and ran the above command to verify the output. Signed-off-by: ARUN MANKUZHI <arun.m@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2013-03-29Exynos: config: Enable ACE HW for SHA 256 for ExynosAkshay Saraswat
This enables SHA 256 for exynos. Signed-off-by: ARUN MANKUZHI <arun.m@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2013-03-26Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-03-15exynos5: Enable generic board for Exynos5 device tree boardsSimon Glass
Enable CONFIG_SYS_GENERIC_BOARD for all Exynos5 boards that use CONFIG_OF_CONTROL. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-12Exynos5: Config: Enable dtt command for TMUAkshay Saraswat
This enables the dtt command to read the current SOC temperature with the help of TMU Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-03-12Exynos5: Config: Enable support for Exynos TMU driverAkshay Saraswat
Enables TMU driver support for exynos5250 Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-03-08config: Snow: Enable MAX98095 codecRajeshwari Shinde
This patch enables MAX98095 codec required for Snow Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-11EXYNOS5: Enable console multiplexing in u-bootAjay Kumar
We enable console multiplexing and use both serial and LCD for stdout/stderr. Initially, u-boot output console is observed via serial port. If you also have a DP panel connected onto your SMDK5250 board, you can switch to LCD console by typing "setenv stdout lcd". You can always switch back to serial using "setenv stdout serial". You can switch error console(stderr) as well, using similar commands. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-11EXYNOS5: Make all display related code dependent on CONFIG_LCDAjay Kumar
u-boot compilation fails for smdk5250 when we deselect CONFIG_LCD from the main config file. Following error was observed: drivers/video/libvideo.o: In function `exynos_lcd_init': /home/ajay/u-boot-samsung/drivers/video/exynos_fb.c:68: undefined reference to `lcd_set_flush_dcache' This is because exynos video drivers have dependency on CONFIG_LCD. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-10EXYNOS5: Add support for FIMD and DPAjay Kumar
Add panel_info structure required by LCD driver and DP panel platdata for SMDK5250. Add GPIO configuration for LCD. Enable FIMD and DP support on SMDK5250. DP Panel size: 2560x1600. We use 16BPP resolution to get LCD console. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chomium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2012-12-26exynos5: config: Rename the smdk5250.h to exynos5250-dt.hHatim RV
Create a common configuration file for all exynos5250 based boards. Going forward we will be using DT based driver discovery for all the boards based on Exynos5. The different boards added will have there own config.h files which internally will include this file and specify their specific DT files. Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
generated by cgit (git 2.34.1) at 2025-01-02 17:30:40 +0000