summaryrefslogtreecommitdiff
path: root/include/configs/mx6ul_14x14_evk.h
AgeCommit message (Collapse)Author
2016-05-02mx6ul_evk: Remove CONFIG_SUPPORT_EMMC_BOOTFabio Estevam
mx6ul_evk does not come with a eMMC populated, so we should not define CONFIG_SUPPORT_EMMC_BOOT as it causes SPL to not be able to boot some brands of SD cards, such as SanDisk microSD HC - 8GB: U-Boot SPL 2016.05-rc1-28384-g108f841 (Apr 19 2016 - 11:19:11) Trying to boot from MMC1 spl: mmc block read error SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### When CONFIG_SUPPORT_EMMC_BOOT is defined spl_boot_mode() returns MMCSD_MODE_EMMCBOOT, so remove this option to have a reliable boot via SD card. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-04-25configs: Re-sync with cmd/KconfigTom Rini
Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25include/configs: Whitespace fixupTom Rini
A number of moveconfig.py runs have left a instances of multiple empty lines in a row. Correct this to a single empty line. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25configs: Re-sync almost all of cmd/KconfigTom Rini
This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-14Move CONFIG_OF_LIBFDT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-21mx6ul_14x14_evk: Select CONFIG_FSL_QSPIFabio Estevam
Select CONFIG_FSL_QSPI so that the SPI can be probed: => sf probe SF: Detected N25Q256 with page size 256 Bytes, erase size 64 KiB, total 32 MiB Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2016-01-24imx: mx6ulevk: add CONFIG_SPI_FLASH_STMICROPeng Fan
Add CONFIG_SPI_FLASH_STMICRO to let qspi driver can detect the qspi chips. " => sf probe SF: Detected N25Q256 with page size 256 Bytes, erase size 64 KiB, total 32 MiB " Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Jagan Teki <jteki@openedev.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2016-01-24imx: mx6ulevk: change mtest memory size to 128MPeng Fan
To i.MX6UL 14x14 EVK, system memory is 512M; to i.MX6UL 9x9 EVK, system memory is 256M. If setting mtest size to 256M, mtest will crash uboot for i.MX6UL 9x9 evk. So change mtest size to 128M. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2016-01-07imx: mx6ul: disable VIDEO for SPLPeng Fan
With DEBUG macro enabled, SPL build failure: " arch/arm/cpu/armv7/built-in.o: In function `reset_misc': ~/uboot/arch/arm/cpu/armv7/mx6/soc.c:406: undefined reference to `lcdif_power_down' scripts/Makefile.spl:244: recipe for target 'spl/u-boot-spl' failed " Wrap VIDEO settings with ifndef CONFIG_SPL_BUILD Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2015-11-25sf: Move SPI flash drivers to defconfigBin Meng
There are already Kconfig options for SPI flash drivers, but we have not moved them from config.h to defconfig files. This commit does this in a batch. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-25spi: Move SPI drivers to defconfigBin Meng
There are already Kconfig options for SPI drivers, but we have not moved them from config.h to defconfig files. This commit does this in a batch. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-12imx: mx6ul_14x14_evk: support lcdif displayPeng Fan
Support lcdif display: 1. Add pinmux and pad settings for LCDIF 2. Introduce setup_lcd to do the settings for LCDIF 3. Enable VIDEO related macros in board header files 4. Add a new env videomode which is needed by mxsfb.c. The settings for videomode in this patch is for TFT43AB. 5. Tested on mx6ul 14x14/9x9 evk. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2015-10-02I2C: mxc_i2c: make I2C1 and I2C2 optionalAlbert ARIBAUD \\(3ADEV\\)
The driver assumed that I2C1 and I2C2 were always enabled, and if they were not, then an asynchronous abort was (silently) raised, to be caught much later on in the Linux kernel. Fix this by making I2C1 and I2C2 optional just like I2C3 and I2C4 are. To make the change binary-invariant, declare I2C1 and I2C2 in every include/configs/ file which defines CONFIG_SYS_I2C_MXC. Also, while updating README about CONFIG_SYS_I2C_MXC_I2C1 and CONFIG_SYS_I2C_MXC_I2C2, add missing descriptions for I2C4 speed (CONFIG_SYS_MXC_I2C4_SPEED) and slave (CONFIG_SYS_MXC_I2C4_SLAVE) config options. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2015-09-13mx6ul_14x14_evk: Use the default CONFIG_SYS_PBSIZEFabio Estevam
Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into the console and hitting enter afterwards, causes a hang in the system because CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error message: "Unknown command '' - try 'help'". Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve this problem. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-09-13mx6ul_14x14_evk: Remove CONFIG_FEC_DMA_MINALIGNFabio Estevam
CONFIG_FEC_DMA_MINALIGN is not used anywhere, so let's remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Peng Fan <Peng.Fan@freescale.com>
2015-09-13mx6ul_14x14_evk: Do not undef config optionsFabio Estevam
There is no need to undef the config options. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Peng Fan <Peng.Fan@freescale.com>
2015-09-13mx6ul_14x14_evk: Remove unused config optionFabio Estevam
CONFIG_ROM_UNIFIED_SECTIONS is not used anywhere, so let's remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Peng Fan <Peng.Fan@freescale.com>
2015-09-13mx6ul_14x14_evk: Remove CONFIG_SYS_GENERIC_BOARDFabio Estevam
CONFIG_SYS_GENERIC_BOARD is selected by mx6_common.h, so there is no need to define it locally. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Peng Fan <Peng.Fan@freescale.com>
2015-09-13mx6ul_14x14_evk: Remove CONFIG_SPL_FAT_SUPPORTFabio Estevam
If the SD card does not contain the u-boot.img then we get the following error: U-Boot SPL 2015.10-rc2-23947-g7ad5930 (Sep 08 2015 - 14:10:29) ** Partition 1 not valid on device 0 ** spl_register_fat_device: fat register err - -1 spl_load_image_fat: error reading image u-boot.img, err - -1 Remove CONFIG_SPL_FAT_SUPPORT and let CONFIG_SPL_MMC_SUPPORT do the job. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-09-13imx: mx6ul: support mx6ul 9x9 evk boardPeng Fan
This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk, the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are: 1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC. 2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk supports 512MB DDR3 3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package. This patch add the following: 1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size() 2. Introduce a macro is_mx6ul_9x9_evk using CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work, so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with mx6ul_14x14_evk. And we have no way to dymaically checking this chip is 9x9 or 14x14. 3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations. POWER related configurations also effect for mx6ul_14x14_evk. But power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk. 4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM configurations. 5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file according to board_rev and board_name. 6. Add TARGET_MX6UL_9X9_EVK Kconfig entry Boot Log: U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53) reading u-boot.img reading u-boot.img U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 41C Reset cause: POR Board: MX6UL 9x9 EVK I2C: ready DRAM: 256 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: FEC1 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2015-09-13imx: discard duplicated MXC_OCOTP and CMD_FUSEPeng Fan
We have CONFIG_MXC_OCOTP and CONFIG_CMD_FUSE in mx6_common.h, discard duplicated macro definitions in board header files. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Peter Robinson <pbrobinson@gmail.com> Cc: Otavio Salvador <otavio@ossystems.com.br>
2015-09-13thermal: imx_thermal: rework driver to be reusedAdrian Alonso
Rework imx_thermal driver to be used across i.MX processor that support thermal sensor Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-09-02imx: mx6ul_14x14_evk add ENET supportPeng Fan
Add enet support for mx6ul_14x14_evk board: 1. add pinmux settings 2. implement board_eth_init 3. implement board_phy_config Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
2015-09-02imx: mx6ul_14x14_evk discard redefined CONFIG_MX6Peng Fan
Discard CONFIG_MX6 in mx6ul_14x14_evk.h, since it is already defined in mx6_common.h. Tested on mx6ul_14x14_evk board. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2015-08-13kconfig: add config option for shell promptNikita Kiryanov
Add option to set shell prompt string from menuconfig and migrate boards globally. The migration is done as follows: - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the entry moved to their defconfig files. - Boards that defined some kind of #ifdef logic which selects the CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT right before the #ifdef logic and were left alone. - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h files. This results in a streamlined default value across platforms, and includes the following files: spear-common, sunxi-common, mv-common, ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common. - Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were not updated in their respective defconfig files under the assumption that since they did not explicitly define a value, they're fine with whatever the default is. - On the other hand, boards that relied on a value defined in some <boards>_common.h file such as woodburn_common, rpi-common, bur_am335x_common, ls2085a_common, siemens_am33x_common, and omap3_evm_common, had their values moved to the respective defconfig files. - The define V_PROMPT was removed, since it is not used anywhere except for assigning a value for CONFIG_SYS_PROMPT. Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> [trini: Add spring, sniper, smartweb to conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-02imx: mx6ul_14x14_evk add basic board supportPeng Fan
1. Add USDHC, I2C, UART, 74LV, USB, QSPI support. 2. Support SPL 3. CONFIG_MX6UL_14X14_EVK_EMMC_REWORK is introduced, this board default supports sd for usdhc2, but can do hardware rework to make usdhc2 support emmc. Boot Log: U-Boot SPL 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59) reading u-boot.img reading u-boot.img U-Boot 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C)CPU: Thermal invalid data, fuse: 0x0 - invalid sensor device Reset cause: POR Board: MX6UL 14x14 EVK I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
generated by cgit (git 2.34.1) at 2024-12-26 13:15:40 +0000