summaryrefslogtreecommitdiff
path: root/include/configs/ti_armv7_keystone2.h
AgeCommit message (Collapse)Author
2016-06-12ti_armv7_common: env: Remove no longer needed mem_reserveAndrew F. Davis
The kernel can now use DT to reserve memory carveouts and these areas are now the default for drivers that need reserved memory, so reserving more here is unneeded and any memory reserved this way will be wasted. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-04usb: move CONFIG_USB_XHCI_DWC3 to KconfigMasahiro Yamada
Create an entry for "config USB_XHCI_DWC3" in Kconfig and switch over to it for all boards. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-04usb: move CONFIG_USB_XHCI to Kconfig with renamingMasahiro Yamada
Move CONFIG_USB_XHCI to defconfig files for all boards, renaming it into CONFIG_USB_XHCI_HCD. As commented in the help of "config USB_XHCI" entry, this has been a TODO for a long time; now CONFIG_USB_XHCI_HCD and CONFIG_USB_XHCI have been unified in favor of the former. Note: Some boards define CONFIG_USB_XHCI in their headers without CONFIG_USB, which does not meet the "depends on" in Kconfig. I added CONFIG_USB=y for those boards when converting. Otherwise, they would fail to build. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-25configs: Re-sync with cmd/KconfigTom Rini
Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25configs: Re-sync almost all of cmd/KconfigTom Rini
This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-18configs: ks2: move CMD_NAND to defconfigsLokesh Vutla
NAND is not yet enabled on all Keystone2 platforms. So enabled CMD_NAND in the respective defconfigs only if available. Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-18memory: Move TI_AEMIF config to KCONFIGLokesh Vutla
Not all Keystone2 devices has AEMIF NAND controller. So adding Kconfig entry for CONFIG_TI_AEMIF and enabling it in respective defconfigs on platforms with AEMIF controller. Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-01configs: ti_armv7_keystone2: make SYS_TEXT_BASE configurable at build timeVitaly Andrianov
U-boot for general purpose KS2 devices is loaded to the beginning of the internal memory (0x0c000000). Secure devices uses this memory and CONFIG_SYS_TEXT_BASE has to be different for those devices. This commit make this configurable at build time by giving CONFIG_SYS_TEXT_BASE as a command line definition to make command. Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
2016-03-15ti_armv7_common: env: Add NFS loading support to default enviromentAndrew F. Davis
NFS loading is similar to net loading except initial files are loaded over NFS instead of TFTP, this removes the need for multiple different protocol servers running on the host and allows the use of a single network file system containing boot related files in their usual in-filesystem directory. Add defaults for this boot style here. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-15keystone2: env: Set mmc as default boot for k2g-evmYan Liu
For k2l, k2e and k2hk, ubi is set to default boot in uboot environment settings; while for k2g, mmc should be the default boot. This patch is to set mmc as default for k2g-evm Signed-off-by: Yan Liu <yan-liu@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-15keystone2: env: add env script for booting with an initramfs with firmwareMurali Karicheri
This patch updates the env script to include a initramfs with firmware loaded and provided to kernel through second argument of bootz command during boot. Defined DEFAULT_FW_INITRAMFS_BOOT_ENV to have all of the required env variables and use it in evm specific config file. The K2 linux drivers for PCIe and NetCP (1G, 10G) requires serdes firmwares. These requires firmware to be available early through the boot process in some cases to satisfy firmware requests from driver. Hence use a small initramfs to provide the same and update boot env to accommodate this in the boot flow. This method is used when rootfs is nfs and ubifs. This fs contains just lib/firmware folder with all required firmware. When rootfs is on initramfs, then the filesystem has the firmware under lib/firmware and this early initramfs is not required and is not used. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-15ti_armv7_keystone2: env: Remove securedb.key.bin loadCarlos Hernandez
securedb.key.bin is not supported so it should not be loaded by default init_ubi command. Signed-off-by: Carlos Hernandez <ceh@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-15ti_armv7_keystone2: env: Update UBIFS image pathsCarlos Hernandez
UBI images created by OE does not contain boot partition by default, instead kernel and dtb are placed in /boot directory inside rootfs partition. So update env commands to load files from correct location. Signed-off-by: Carlos Hernandez <ceh@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-15ti_armv7_keystone2: configs: add usb mass storage supportMugunthan V N
Add USB mass storage support so that kernel can be read from connected usb storage. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-14configs: k2g_evm: Add TI power processor supportNishanth Menon
Enable support for PMMC the TI power processor on K2G. This processor manages all power management related activities on the SoC and and allows the Operating Systems on compute processors such as ARM, DSP to offload the power logic away into the power processor. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-14Kconfig: Move CONFIG_FIT and related options to KconfigSimon Glass
There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-12-05eeprom: Zap CONFIG_SYS_I2C_MULTI_EEPROMSMarek Vasut
This symbol is no longer used anywhere, remove it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@konsulko.com> Acked-by: Heiko Schocher <hs@denx.de>
2015-11-25sf: Move SPI flash drivers to defconfigBin Meng
There are already Kconfig options for SPI flash drivers, but we have not moved them from config.h to defconfig files. This commit does this in a batch. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-21ARM: keystone2: configs: Correct burn_uboot_sp erase sizeCooper Jr., Franklin
The NOR flash on Keystone 2 evms has a u-boot-spl partition size of 0x80000. Currently burn_uboot_spi will erase 0x100000 from the spi NOR which will cause a partial erase of the misc partition. Fix this by correcting the erase size. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
2015-11-21ns16550: move CONFIG_SYS_NS16550 to KconfigThomas Chou
Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-21ns16550: zap CONFIG_NS16550_SERIALThomas Chou
Zap CONFIG_NS16550_SERIAL, as the unification of ns16550 drivers is completed. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-11-21ns16550: unify serial_keystoneThomas Chou
Unify serial_keystone, and use the generic binding. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-11-18common: add CMD_GPIO to KconfigThomas Chou
Add CMD_GPIO to Kconfig and run tools/moveconfig.py . Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-22ARM: k2g: Add clock informationVitaly Andrianov
Add clock information for Galileo Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2015-10-22ARM: dts: k2hk: Enable OF_CONTROL and DMLokesh Vutla
Import k2hk specific DT files from Linux Kernel and enable OF_CONTROL, DM, DM_SERIAL. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22ARM: keystone2: spl: Fix stack allocation with CONFIG_SYS_MALLOC_F_LENLokesh Vutla
If CONFIG_SYS_MALLOC_F_LEN is enabled, the stack is moved down to the specified size to make the malloc function available before relocation. But on keystone platforms SYS_SPL_MALLOC is immediately preceding stack, which is causing an overlap with this config enabled. So leave a gap between malloc space and stack space. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-08-28ARM: keystone2: configs: Move SP to end of u-boot sectionLokesh Vutla
Currently u-boot stack is defined at the beginning of MSMC RAM. This is a problem for uart boot mode as ROM downloads directly to starting of MSMC RAM. Fixing it by moving stack to the end of u-boot section and shifting SYS_TEXT_BASE to the start of MSMC RAM. Updated division of MSMC RAM is shown below: ----------------------------------------- | | | | | U-Boot text |U-Boot | SPL text | | download | Stack | Download + | | | | SPL_BSS + | | | | SPL_STACK | ----------------------------------------- [1] [2] [3] [4] [1] SYS_TEXT_BASE (Start of MSMC RAM) [2] SPL_TEXT_BASE - GBL_DATA_SIZE [3] SPL_TEXT_BASE [4] END of SPL [1] + [2] is at least 1M on all platforms, so no chance of overlap. Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-08-13configs: ti_armv7_keystone2: increase size reserved for initrdVitaly Andrianov
9MB reserved for initrd is not enough for default ramfs used for keystone devices, which is ~33MB. This patch increases the size up to 80MB. Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
2015-08-13configs: ti_armv7_keystone2: fix initrd address at args_ramfsVitaly Andrianov
This patch set the correct initrd address to much rdaddr, which used at get_fs_ramfs commad. Fixes: 3e97f0b63c8e ("configs: ti_armv7_keystone2: switch addresses to generic addresses") Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
2015-08-12ARM: keystone2: Enable CONFIG_DISPLAY_CPUINFOLokesh Vutla
Add print_cpuinfo() function and enable CONFIG_DISPLAY_CPUINFO for keystone platforms, so that cpu info can be displayed during boot. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-08-03configs: ti_armv7_keystone2: replace addr_uboot with loadaddrVitaly Andrianov
This patch replaces not existing addr_uboot environment variable by loadaddr at get_uboot_net and burn_uboot_xxx commands. Otherwise these commands are broken. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Acked-by: Nishanth Menon <nm@ti.com>
2015-07-27configs: ti_armv7_keystone2: switch to using kernel zImageNishanth Menon
Switch to using zImage instead of uImage. and while at it, start using bootz as default. While at it, get rid of BOOTIMAGE define and start using Linux upstream dtb file names. Reviewed-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2015-07-27configs: ti_armv7_keystone2: switch addresses to generic addressesNishanth Menon
Use the defaults defined in DEFAULT_LINUX_BOOT_ENV Reviewed-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2015-07-27configs: ti_armv7_keystone2: start using armv7_commonNishanth Menon
Try to maintain as much commonality by conditionally including stuff in armv7_common as necessary and removing the common defines from keystone2 header. Note: as part of this change, all keystone2 platforms will now start using the generic u-boot prompt instead of the custom prompt. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-07-27configs: rename ks2_evm into ti_armv7_keystone2Nishanth Menon
rename the keystone2 common header into an keystone2 architecture specific header which can then reuse the common ti_armv7 config headers. Acked-by: Vitaly Andrianov <vitalya@ti.com> Acked-By: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Nishanth Menon <nm@ti.com>
generated by cgit (git 2.34.1) at 2024-12-23 20:26:54 +0000