summaryrefslogtreecommitdiff
path: root/include/configs/xilinx_zynqmp.h
AgeCommit message (Collapse)Author
2020-01-14arm64: zynqmp: Move PANIC to KconfigMichal Simek
Convert another option Kconfig. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14arm64: zynqmp: Add support for u-boot.itb generation with ATFMichal Simek
Follow i.MX, Sunxi, RISC-V and Rockchip to generate u-boot.itb which includes U-Boot proper, ATF and DTBs in FIT format. ZynqMP supports FIT for quite a long time but with using out of tree solution. The patch is filling this gap. Tested on zcu102, zcu104 and zcu100/Ultra96. zcu100/Ultra96 v2.2 ATF build by: make DEBUG=0 ZYNQMP_CONSOLE=cadence1 RESET_TO_BL31=1 PLAT=zynqmp bl31 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14board: xilinx: Add support for user configurable boot script offsetT Karthik Reddy
Currently "script_offset_f" env variable is hardcoded, this variable specifies from which offset of the flash boot.scr should be read/write. As flashes are of different sizes having a fixed offset makes it difficult to load other images into the flash which may overwrite the boot script or cannot utilize the full memory. This current fix creates a new config "CONFIG_BOOT_SCRIPT_OFFSET" which holds the offset address, overwrites the "script_offset_f" variable. Also removed existing variable with default values, as the default values are held by CONFIG_BOOT_SCRIPT_OFFSET Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Add new jtag distro boot commandSiva Durga Prasad Paladugu
This patch adds new jtag distro boot command to look for bootscript file in DDR and execute it first incase of jtag bootmode. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Update scriptaddr value to 512MBSiva Durga Prasad Paladugu
This patch updates scriptaddr value to 512MB as having it at 32MB has high chance of script corruption incase of bigger kernel. Be aware that 512MB is used for SPL malloc area that's why images should be loaded after SPL (the best after u-boot relocation). Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Set initrd_high to as high as possibleT Karthik Reddy
This patch is setting up the initrd_high to as high as possible by leaving max stack size for u-boot so that bigger rootfs can also be loaded by u-boot for booting kernel. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-08-25Convert CONFIG_SYS_SPI_U_BOOT_OFFS to KconfigHannes Schmelzer
This converts the following to Kconfig: CONFIG_SYS_SPI_U_BOOT_OFFS Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> [trini: Expose this for SPL_SPI_SUNXI for now] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-25moveconfig: prepare moving CONFIG_SYS_SPI_U_BOOT_OFFS to Kconfig step 2Hannes Schmelzer
some boards have common headers for several individual build-targets where CONFIG_SYS_SPI_U_BOOT_OFFS is defined even it is not needed (only needed if CONFIG_SPL_SPI_LOAD is defined also). Take this define here under '#ifdef CONFIG_SPL_SPI_LOAD' for having a clean run of moveconfig.py Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-07-30ARM: zynq: delete long-dead CONFIG_USB_CABLE_CHECKRobert P. J. Day
This Kbuild option disappeared way back in 2014: commit 75504e9592745021006cb8905b5ff5a51d9d1cb3 Author: Mateusz Zalega <m.zalega@samsung.com> Date: Wed Apr 30 13:07:48 2014 +0200 ... snip ... CONFIG_USB_CABLE_CHECK was removed. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-05-04Convert CONFIG_SUPPORT_EMMC_BOOT to KconfigAlex Kiernan
This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT As requested by Michal Simek <michal.simek@xilinx.com>, these boards have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated: xilinx_zynqmp_zc1275_revB xilinx_zynqmp_zc1751_xm018_dc4 xilinx_zynqmp_zc1751_xm019_dc5 xilinx_zynqmp_zcu100_revC xilinx_zynqmp_zcu102_rev1_0 xilinx_zynqmp_zcu102_revA xilinx_zynqmp_zcu102_revB xilinx_zynqmp_zcu104_revA xilinx_zynqmp_zcu104_revC xilinx_zynqmp_zcu106_revA xilinx_zynqmp_zcu111_revA Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-04-29configs: move CONFIG_SPL_TEXT_BASE to KconfigSimon Goldschmidt
Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing values. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-16arm64: zynqmp: Remove eeprom settingMichal Simek
By moving to DM_I2C there is no need to specify any eeprom configuration because it is read from DT. Reported-by: Sreeja Vadakattu <sreeja.vadakattu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-14arm64: zynqmp: Switch all platforms to DM_I2CMichal Simek
CONFIG_PCA953X is not needed because of PCA953X is integrated in gpio subsystem already. That's why also remove CMD_PCA953X which is only for this driver. zcu102/zcu104-revC/zcu106/zcu111 contain links to eeprom which stores MAC address. DM_I2C is not enabled for the whole SoC because it increase size for mini configurations and there is no I2C symbol present to setup dependencies. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-02-14arm64: zynqmp: Define distro boot commnads for qspi and nandSiva Durga Prasad Paladugu
This patch adds distro boot commands for qspi and nand. The distro boot commands now reads the script from flash offset of 63.5MB and executes it. Setup default location via script_offset_f to 63.5MB to match the most xilinx reference boards. 512kB allocated space for script size (script_size_f) should be more than enough to cover custom boot logic. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-26spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFUAndrew F. Davis
The symbol CONFIG_SPL_DFU_SUPPORT in SPL build has the same meaning as CONFIG_DFU in regular U-Boot. Drop the _SUPPORT to allow for cleaner use in code. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2018-09-25ata: Drop CONFIG_SYS_SCSI_MAX_* from boards using DM_SCSITuomas Tynkkynen
These options are not used or necessary when device model is being used for SCSI. Just drop them. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-17Convert CONFIG_MII et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-08-16configs: Migrate CONFIG_NR_DRAM_BANKSTom Rini
We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-22Convert CONFIG_MTD_PARTITIONS et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_MTD_PARTITIONS CONFIG_MTD_DEVICE Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-19env: Added support to save env to spi through KconfigVipul Kumar
This patch added support to enable CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET and CONFIG_ENV_SECT_SIZE through Kconfig for Zynq and Zynqmp. Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-10cmd: Kconfig: Move CONFIG_MP to KconfigSiva Durga Prasad Paladugu
This patch moves CONFIG_MP to Kconfig Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-13xilinx: Only enable dist boot pxe when DHCP is enabledJoe Hershberger
Otherwise, we see this: In file included from include/configs/zynq-common.h:183:0, from include/config.h:5, from include/common.h:21, from env/common.c:11: include/config_distro_bootcmd.h:319:2: error: expected ?}? before ?BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE? BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE ^ include/config_distro_bootcmd.h:319:2: note: in definition of macro ?BOOTENV_DEV_NAME_PXE? Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-11spl: spi: Move CONFIG_SPL_SPI_LOAD to KconfigMarek Vasut
Add Kconfig entry for CONFIG_SPL_SPI_LOAD symbol and move all configurations using it to Kconfig. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2018-04-09arm64: zynqmp: Enable pxe and dhcp if commands are enabledMichal Simek
Targets without net can't use pxe or dhcp boot methods. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-08treewide: Migrate CONFIG_BOARD_EARLY_INIT_R to KconfigMario Six
Migrate the CONFIG_BOARD_EARLY_INIT_R option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-04-08treewide: Migrate CONFIG_SYS_ALT_MEMTEST to KconfigMario Six
Migrate the CONFIG_SYS_ALT_MEMTEST option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc> [trini: Re-run migration after also including CMD_MEMTEST] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-23arm64: zynqmp: Changed scratch address used by the alternate memory testVipul Kumar
This patch changed CONFIG_SYS_MEMTEST_SCRATCH address to the accessible DDR address used by alternate memory test. Before this, 0xfffc0000 address was used, which is the OCM address and not enabled in MMU table. So, whenever trying to access 0xfffc0000 address, got Synchronous Abort exception. After changing CONFIG_SYS_MEMTEST_SCRATCH address, alternate memory test is working fine. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-16Convert all of CONFIG_CONS_INDEX to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-01mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQVipul Kumar
This patch added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ and enabled it in respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-01i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SPEEDVipul Kumar
This patch added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SPEED and set it to default value 100000. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-01i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SLAVEVipul Kumar
This patch added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SLAVE and set it default to 0. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-02-23Remove config_distro_defaults.hAdam Ford
With the contents of config_distro_defaults.h migrated to Kconfig, we can remove this header file completely Signed-off-by: Adam Ford <aford173@gmail.com>
2018-02-23Convert CONFIG_BOOTP_BOOTPATH et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_BOOTP_BOOTPATH CONFIG_BOOTP_DNS CONFIG_BOOTP_GATEWAY CONFIG_BOOTP_HOSTNAME CONFIG_BOOTP_PXE CONFIG_BOOTP_SUBNETMASK CONFIG_CMDLINE_EDITING CONFIG_AUTO_COMPLETE CONFIG_SYS_LONGHELP CONFIG_SUPPORT_RAW_INITRD CONFIG_ENV_VARS_UBOOT_CONFIG Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-run the migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-14configs: Migrate CONFIG_SPL_FRAMEWORKTom Rini
Migrate the option CONFIG_SPL_FRAMEWORK and make this gate most of the current set of options we have in Kconfig. We will need to have some options available for SPL and !SPL_FRAMEWORK so this is important. In a few cases we re-order existing options so that we have less escapes from the SPL_FRAMEWORK guard. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-02Kconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to KconfigLukasz Majewski
This commit moves USB_FUNCTION_THOR config to Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-01-30arm64: zynqmp: Moved ethernet PHY configs of ZynqMP boards to defconfigVipul Kumar
This patch moved ethernet PHY configs of ZynqMP boards to respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm64: zynqmp: Call psu_init() only when ZYNQMP_PSU_INIT_ENABLEDMichal Simek
Remove SPL_BUILD dependency from zynqmp.c and move it to header file. Use only one symbol for including psu_init. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30nand: arasan: Select CONFIG_SYS_NAND_SELF_INITEzequiel Garcia
The Arasan NFC driver requires the self-init mode, so it should select it. Instead of having the config header define the macro, it's cleaner to select the option at the Kconfig level. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-14arm64: zynqmp: Add support for generic QSPI bootMichal Simek
This patch is enabling support for SPL QSPI boot. First of all it is necessary to generate atf-spi.ub which is different format than atf-uboot.ub (this can be made as legacy image too) ADDR=`arm-xilinx-linux-gnueabi-readelf -a bl31.elf | grep "Entry point address" | cut -d ':' -f 2 | sed -e 's/^[ \t]*//'` aarch64-linux-gnu-objcopy -O binary bl31.elf bl31.bin ./tools/mkimage -f auto -A arm64 -T firmware -C none -O u-boot -a $ADDR -e $ADDR -n "atf1" -E -b arch/arm/dts/zynqmp-zcu102.dtb -d bl31.bin atf-uboot.ub ./tools/mkimage -A arm64 -T firmware -C none -O u-boot -a $ADDR -e $ADDR -n "atf-for-qspi" -E -d bl31.bin atf-spi.ub This patch is using this QSPI layout with offsets: 0 boot.bin 512k atf-ub 640k u-boot.bin 1280k u-boot.img Which corresponding by writing these images(read from MMC) mmcinfo sf probe load mmc 0 10000000 boot.bin sf erase 0 +$filesize sf write 10000000 0 $filesize load mmc 0 10000000 atf-spi.ub sf erase 0x80000 +$filesize sf write 10000000 0x80000 $filesize load mmc 0 10000000 u-boot.bin sf erase 0xa0000 +$filesize sf write 10000000 0xa0000 $filesize load mmc 0 10000000 u-boot.img sf erase 0x140000 +$filesize sf write 10000000 0x140000 $filesize For testing u-boot running in EL3 you can break atf-spi.ub like this: sf probe sf erase 0x80000 +4 Then u-boot.img is executed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-14arm64: zynqmp: Do not use SPL_SYS_MALLOC_SIMPLE allocatorMichal Simek
This was caused by: "fs/fat: Reduce stack usage" (sha1:2460098cffacd18729262e3ed36656e6943783ed) which converted fat code to use malloc. But simple malloc is not freeing space that's why full malloc implementation is needed. Malloc space is added to RAM. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-14arm64: zynqmp: Do not perform reset in case of panicMichal Simek
Do not perform reset when panic happens because in the next reset panic happens again and logs are overflood by the same errors. This can be enabled by default and reset can be performed via watchdog. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-12ata: Migrate CONFIG_LIBATA to KconfigTuomas Tynkkynen
This symbol enables some library code used by various SATA drivers, so make this a non-user-visible symbol select'ed by the respective drivers, and let moveconfig handle the rest. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12ata: Migrate CONFIG_SCSI_AHCI to KconfigTuomas Tynkkynen
And use 'imply' liberally. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-11-28arm: zynq: Move ZYNQ_SERIAL to KconfigMichal Simek
Move cadence/zynq serial driver via Kconfig Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-27net: remove CONFIG_NET_MULTIMasahiro Yamada
This macro is defined, but not referenced by anyone. I did not touch config_whitelist.txt - the CONFIG will be dropped by the next re-sync. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-03cmd: Move CONFIG_RANDOM_UUID to KconfigMaxime Ripard
CONFIG_RANDOM_UUID is used by the GPT command to generate random UUID when none are provided. Move that option to Kconfig. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-03include/configs: drop default definitions of CONFIG_SYS_PBSIZEThomas Petazzoni
Now that the fallback value of CONFIG_SYS_PBSIZE in include/config_fallbacks.h has been adjusted, remove its definition from a large number of board configuration files. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-01Kconfig: Migrate all of cmd/fastboot/Kconfig to defconfigsTom Rini
- Move ANDROID_IMAGE_SUPPORT to top level Kconfig under images as it's not strictly part of fastboot. - Add some defaults for the fastboot buffer location and size - Migrate all options listed in cmd/fastboot/Kconfig - Cleanup the README Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-11Convert CONFIG_CMD_THOR_DOWNLOAD to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_CMD_THOR_DOWNLOAD Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
generated by cgit (git 2.34.1) at 2024-12-29 06:32:43 +0000