summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2013-05-13blackfin: Enable early print via the generic serial API.Sonic Zhang
Remove blackfin specific implementation of the generic serial API when early print macro is defined. In BFIN_BOOT_BYPASS mode, don't call generic serial_puts, because early print in bypass mode is running before code binary is relocated to the link address. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: Fit u-boot image size into limited nor flash on blackfin.Sonic Zhang
- Disable NAND driver on bf537-stamp. - Make MMC_SPI optional. - Disable LCD driver on bf527-ezkit. - Enlarge BF609 nor flash reserved size from 256k to 512k bytes. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
2013-05-13blackfin: bf609: add softswitch config commandBob Liu
Add softswitch_output command for bf609-ezkit to enable softswitches. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: run core1 from L1 code sram start address in uboot init code on core 0Sonic Zhang
Define core 1 L1 code sram start address. Add function to enable core 1 for BF609 and BF561. Add config macro to allow customer to run core 1 in uboot init code on core 0. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: reduce size of u-boot.ldr in bf548-ezkit default config.Bob Liu
Enable VIDEO and NAND supports only when the config options is defined. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-09gpio: Add support for microblaze xilinx GPIOMichal Simek
Microblaze uses gpio which is connected to the system reset. Currently gpio subsystem wasn't used for it. Add gpio driver and change Microblaze reset logic to be done via gpio subsystem. There are various configurations which Microblaze can have that's why gpio_alloc/gpio_alloc_dual(for dual channel) function has been introduced and gpio can be allocated dynamically. Adding several gpios IP is also possible and supported. For listing gpio configuration please use "gpio status" command This patch also remove one compilation warning: microblaze-generic.c: In function 'do_reset': microblaze-generic.c:38:47: warning: operation on '*1073741824u' may be undefined [-Wsequence-point] Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-03P1022DS: Set CONFIG_SPL_MAX_SIZE directlyTom Rini
With the u-boot-with-spl.bin rule calling $(OBJCOPY) with CONFIG_SPL_PAD_TO, and CONFIG_SPL_PAD_TO defaulting to CONFIG_SPL_MAX_SIZE we cannot use math here, so set it to 4096 rather than 4 * 1024. Signed-off-by: Tom Rini <trini@ti.com>
2013-05-02Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini
2013-05-02powerpc/85xx: set USB2 default mode to 'device' for (super)hydra boardsShaohui Xie
The Hydra and Superhydra (P3041DS, P5020DS, and P5040DS) boards have a second USB port that can be configured in either host, peripheral (aka device), or OTG (on-the-go) mode. When configured in host mode, if the port is connected to another USB host, damage to the board can occur. To avoid this, we change the default setting to peripheral mode. Ideally, we'd set it to OTG mode, but currently there is no OTG support for these boards. Setting the hwconfig variable will also update the device tree, and so Linux will configure the port for peripheral mode as well. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Timur Tabi <timur@tabi.org> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-02powerpc/p1022ds: Add support for NAND and NAND boot using SPLMatthew McClintock
Add defines needed to access NAND, remove second flash bank that is actually connected to NAND. Add nand booting support for P1022DS with hardcoded DDR config using SPL framework from 2011 Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Jiang Yutang <b14898@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-02Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxTom Rini
2013-05-02mpc5200: a3m071/a4m2k: Miscellaneous updates and fixesStefan Roese
The changes to a3m071/a4m2k in summary are: - Enable CAN1 on I2C in GPS Port Configuration - Enable SPI on PSC2 - Activate network console - New flash partitioning - Fix some typos - Pass host name to Linux - Change rootfs to squashfs,jffs2 - Enable UBI/UBIFS support - Enable FIT support Signed-off-by: Stefan Roese <sr@denx.de>
2013-05-02mpc5200: a3m071/a4m2k: Fix problem with increased global_data structStefan Roese
The v2013.04 release has this patch set included: 5cb48582 "Add architecture-specific global data" With this, the global_data struct is now common and new variables have been added. Resulting in a bigger struct. Unfortunately the currently allocated 128 bytes are just a bit too small for this new struct. This patch now uses the automatically generated struct size instead to not run into this problem again. Please note that this problem might hit some other platforms which currently reserve a tight space of 128 bytes for the global_data struct! Signed-off-by: Stefan Roese <sr@denx.de>
2013-05-02mpc5200: a3m071/a4m2k: Enable flash verify optionStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2013-05-01omap5_uevm: Enable redundant MMC environmentTom Rini
Cc: Sricharan R <r.sricharan@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
2013-05-01mx28evk: Guard NAND-related ENV defines with CONFIG_ENV_IS_IN_NANDTom Rini
The redundancy related defines are only correct for NAND, so guard all of that area with CONFIG_ENV_IS_IN_NAND Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Tom Rini <trini@ti.com>
2013-05-01tx25: add CONFIG_SPL_LIBGENERIC_SUPPORTAndreas Bießmann
In order to use the generic hang() later on pull libgeneric in SPL. This has no impact on the SPL size. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-05-01mx31pdk: add CONFIG_SPL_LIBGENERIC_SUPPORTAndreas Bießmann
In order to use the generic hang() later on pull libgeneric in SPL. This has no impact on the SPL size. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-05-01amcc-common.h: enable support for "env grep", "setexpr", and regex.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Stefan Roese <sr@denx.de>
2013-05-01amcc-common.h: minor white space cleanupWolfgang Denk
Align some comments. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Stefan Roese <sr@denx.de>
2013-05-01m28evk: enable "env grep" and regexp supportWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> Conflicts: include/configs/m28evk.h
2013-05-01m28evk: white space cleanupWolfgang Denk
Change all "#define<TAB>" sequences into "#define<SPACE>" Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2013-05-01sandbox: config: Enable CONFIG_FIT and CONFIG_CMD_FITSimon Glass
Enable these options to use FITs on sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-01sandbox: Add CONFIG_OF_HOSTFILE to read FDT from host fileSimon Glass
With sandbox it is tricky to add an FDT to the image at build time (or later) since we build an ELF file, not a plain binary, and the address space of the whole U-Boot is not accessible in the emulated memory map of sandbox. Sandbox can read files directly from the host, though, so add an option to read an FDT from a host file on start-up. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-01sandbox: Switch over to generic boardSimon Glass
Add generic board support for sandbox. and remove the old board init code. Select CONFIG_SYS_GENERIC_BOARD for sandbox now that this is supported. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
2013-05-01Merge branch 'microblaze' of git://www.denx.de/git/u-boot-microblazeTom Rini
2013-04-30watchdog: Add support for Xilinx Microblaze watchdogMichal Simek
Watchdog can be used on Microblaze, PPC and Zynq hw designs. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
2013-04-30microblaze: Enable netconsoleMichal Simek
Setup environment and enable netconsole. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
2013-04-22ppc4xx: Add lcd4_lwmon5 supportStefan Roese
This patch adds the fast booting LWMON5 derivat "lcd4_lwmon5". Its a stripped down version of the full blown lwmon5 support, without ECC, USB, POST and some other stuff. It used the newly introduced SPL infrastrucure for SPL from NOR flash booting on the PPC4xx. By setting the environment variable "boot_os" to "yes", Linux will be started from the SPL version. If not, the "normal" U-Boot will be started. Signed-off-by: Stefan Roese <sr@denx.de>
2013-04-18Merge branch 'master' of git://git.denx.de/u-boot-arm into HEADTom Rini
Quick manual fixup to merge the USB boot related defines and TPM related defines. Conflicts: include/configs/exynos5250-dt.h Signed-off-by: Tom Rini <trini@ti.com>
2013-04-17Exynos5: Add support for USB download boot modeVivek Gautam
Exynos5250 supports secondary USB device boot mode. If the iROM fails to download u-boot from the primary boot device (such as SD or eMMC), it will try to retrieve from the secondary boot device (such as USB). Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-04-15x86: config: Init PCI before SPISimon Glass
Since the ICH SPI controller uses PCI, we must ensure that PCI is available before it is inited. This fixes the current "ICH SPI: Cannot find device" message on boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-04-15Tegra: T30: Beaver board support.Tom Warren
Beaver is a Tegra30 board that is nearly 100% compatible w/Cardhu. Add a Beaver build so it can begin to be differentiated, if need be. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-04-15Tegra: TEC: Enable boot script supportThierry Reding
Boot script support brings TEC in line with other Tegra boards. To enable booting a Linux kernel with initial ramdisk, also include support for the new FIT image type. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-04-15Tegra: Plutux: Enable NAND and boot script supportThierry Reding
Boot script support brings Plutux in line with other Tegra boards. In order to enable booting a Linux kernel with initial ramdisk, also add support for the new FIT image type. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-04-15Tegra: Medcom-Wide: Enable NAND and boot script supportThierry Reding
Boot script support brings Medcom-Wide in line with other Tegra boards. In order to enable booting a Linux kernel with initial ramdisk, also add support for the new FIT image type. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-04-15Tegra: enable verify support for the crc32 commandTom Warren
Some 3rd-party flash tools use the -v (verify) option of crc32 command. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2013-04-15Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2013-04-14smdk5250, snow: convert to CONFIG_SPL_MAX_FOOTPRINTAlbert ARIBAUD
This target wants to check full SPL size, BSS included. Remove CONFIG_SPL_MAX_SIZE definition and instead define CONFIG_SPL_MAX_FOOTPRINT. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-04-14da850evm, da850_am18xxevm: convert to CONFIG_SPL_MAX_FOOTPRINTAlbert ARIBAUD
This target wants to check full SPL size, BSS included. Remove CONFIG_SPL_MAX_SIZE definition and instead define CONFIG_SPL_MAX_FOOTPRINT. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-04-14cam_enc_4xx: convert to CONFIG_SPL_MAX_FOOTPRINTAlbert ARIBAUD
This target wants to check full SPL size, BSS included. Remove CONFIG_SPL_MAX_SIZE definition and instead define CONFIG_SPL_MAX_FOOTPRINT. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-04-14ARM: fix CONFIG_SPL_MAX_SIZE semanticsAlbert ARIBAUD
Remove SPL-related ASSERT() in arch/arm/cpu/u-boot.lds as this file is never used for SPL builds. Rewrite the ASSERT() in arch/arm/cpu/u-boot-spl.lds to separately test image (text,data,rodata...) size, BSS size, and full footprint each against its own max, and make Tegra boards check full footprint. Also, output section mmutable is not used in SPL builds. Remove it. Finally, update README regarding the (now homogeneous) semantics of CONFIG_SPL_[BSS_]MAX_SIZE and add the new CONFIG_SPL_MAX_FOOTPRINT macro. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Reported-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-04-14Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-04-13mx6qsabre{sd, auto}: Fix environment as 'mmc rescan' takes no argumentsOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-04-13Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-04-12exynos: Enable I2C TPM for smdk5250Simon Glass
This is used on some Exynos 5250 variants. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-04-12integrator: enable device treeLinus Walleij
This enables the device tree library on the Integrator platforms so we can pass a device tree when booting. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-12VCMA9: Enable CONFIG_CMD_NAND_YAFFSTom Rini
As this board has NAND and supports YAFFS2, add CONFIG_MD_NAND_YAFFS Cc: David Müller <d.mueller@elsoft.ch> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: David Müller <d.mueller@elsoft.ch>
2013-04-12Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD
Conflicts: drivers/video/exynos_fb.c
2013-04-12omap5_common.h: Switch to ext4Tom Rini
ext3 should not be used on SD cards, so use ext4 instead. Cc: Sricharan R <r.sricharan@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
generated by cgit (git 2.34.1) at 2025-01-14 07:39:40 +0000