summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2016-06-28Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2016-06-28armv8: ls1043aqds: print FPGA info early for QSPI bootQianyu Gong
Now I2C is initialized early enough to access FPGA so it supports to show board info as early as other boot methods. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-28armv8: ls1043aqds: use configurable clockQianyu Gong
Get the clocks from FPGA through I2C, if IFC is disabled. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-26arm: at91: taurus/axm: add DM and DTS supportHeiko Schocher
add DM and DTS support for the at91 based siemens boards. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebased on current ToT] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-26arm: at91: smartweb: add DM and DTS supportHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebased on current ToT] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-26corvus DTS / DM supportHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebase on current ToT, don't delete gurnard DTB creation] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-24board/BuR: rename kwb board to brxre1Hannes Schmelzer
Rename B&R kwb board to brxre1 Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-24board/BuR: rename tseries board to brppt1Hannes Schmelzer
Rename B&R tseries board to brppt1 Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-24arm: bcm235xx: choose 8-bit phy bus widthSteve Rae
The Kona PHY supports an 8-bit wide UTMI interface, therefore, choose this Kconfig setting. Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-24Move CONFIG_SYS_HUSH_PARSER to Kconfig for last 4 boardsMasahiro Yamada
I still see some defines of this config in board headers. Move them to defconfigs (+ renaming to CONFIG_HUSH_PARSER) to complete this migration. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-24configs: gxbb: Introduce a common config header fileCarlo Caione
Introduce a meson-gxbb-common.h header file and derive the configuration for Hardkernel Odroid-C2 board from that. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com>
2016-06-23arm: socfpga: Fix "improve raw MMC SPL boot"Marek Vasut
This fixes commit d31e9c575f24f4b7f5f382ccae70d7a86bbc379d , which broke booting from SD card on all SoCFPGA boards. The patch assumes the bootloader partition to be partition 3, at the end of the SD card, which doesn't make any sense. U-Boot assumes the bootloader partition is partition 1 or that the bootloader image is at offset +1 MiB from the start of SD card. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Sylvain Lesne <lesne@alse-fr.com>
2016-06-20dragonboard410c: Increase default environment size.Mateusz Kulikowski
Due to changes in distro environment, ENV_SIZE limit was reached on Dragonboard. This patch increases environment size to 8KiB. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
2016-06-20ARM: uniphier: move CONFIG_ARMV8_MULTIENTRY to KconfigMasahiro Yamada
I just did not notice this option had an entry in Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-20ARM: uniphier: change CPU_RELEASE_ADDR to the head of DRAM spaceMasahiro Yamada
At first, 256 byte of the head of DRAM space was reserved for some reasons. However, as the progress of development, it turned out unnecessary, and it was never used in the end. Move the CPU release address to leave no space. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-18Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2016-06-18Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2016-06-18warp7: Fix DFU supportFabio Estevam
Currently DFU is not working. Adjust CONFIG_SYS_MALLOC_LEN and dfu_alt_info so that we are able to flash u-boot.imx into the eMMC via dfu using the following method: => dfu 0 mmc 0 In the host PC: dfu-util -D u-boot.imx -a boot This is the same approach done in the mx6sl warp board. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-06-18warp7: Fix watchdog resetMarco Franchi
The latest version of warp7 board provides the connection of the WDOG1_B pin to the PMIC. Program the watchdog to enable the WDOG1_B output which causes a POR reset. Based on the imx7dsabresd code. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-06-18Merge branch 'master' of git://git.denx.de/u-bootStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2016-06-17arm, am335x: siemens: enable DM/DTS supportHeiko Schocher
enable basic DM/DTS support for the siemens am335x based boards. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-17OMAP3: fix twister boardStefano Babic
twister board was not updated after changing SPL defines, resulting in a broken board. Signed-off-by: Stefano Babic <sbabic@denx.de>
2016-06-17configs: Re-sync BOOTDELAY changesTom Rini
With updated moveconfig.py and an better default, re-generate the migration of BOOTDELAY to the defconfig. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-06-13ti_omap5_common: Add right dtb file for AM572x-IDKLokesh Vutla
Add proper dtb file name for AM572x-IDK in env. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-13armv8: s32v234: Introduce basic support for s32v234evbEddy Petrișor
Add initial support for NXP's S32V234 SoC and S32V234EVB board. The S32V230 family is designed to support computation-intensive applications for image processing. The S32V234, as part of the S32V230 family, is a high-performance automotive processor designed to support safe computation-intensive applications in the area of vision and sensor fusion. Code originally writen by: Original-signed-off-by: Stoica Cosmin-Stefan <cosminstefan.stoica@freescale.com> Original-signed-off-by: Mihaela Martinas <Mihaela.Martinas@freescale.com> Original-signed-off-by: Eddy Petrișor <eddy.petrisor@gmail.com> Signed-off-by: Eddy Petrișor <eddy.petrisor@nxp.com>
2016-06-13board: arm:: Add support for Broadcom BCM23550Steve Rae
Add support for the Broadcom BCM23550 board. Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-13Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini
2016-06-12Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini
2016-06-13autoboot: follow-up cleanup after CONFIG_BOOTDELAY movesMasahiro Yamada
Tidy up garbage left by commit bb597c0eeb7e ("common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig option"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-13ARM: stm32: remove unused CONFIG_AUTOBOOTMasahiro Yamada
At this point, this is not referenced from anywhere, so remove it (but it will be re-added later for a different meaning). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-12arm: at91: Add support for gurnardAndre Renaud
This board is based on Snapper 9G45 which has an Atmel AT91SAM9G45 chip and 128MB of SDRAM. It includes a small LCD, 2xUSB host, SD card, Ethernet and two UARTs. Signed-off-by: Andre Renaud <andre@designa-electronics.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [apply CONFIG_BOOTDELAY transition] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-12ti_armv7_common: env: Remove no longer needed mem_reserveAndrew F. Davis
The kernel can now use DT to reserve memory carveouts and these areas are now the default for drivers that need reserved memory, so reserving more here is unneeded and any memory reserved this way will be wasted. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-12Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini
2016-06-12Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2016-06-10armv8: ls2080aqds: Enable QSPI boot supportYuan Yao
This patch adds QSPI boot support for LS2080AQDS board. The QSPI boot image need to be programmed into the QSPI flash first. Then we can switch to booting from QSPI memory space. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-10configs: ls2080a: Increase load image len in NAND bootYuan Yao
Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-10armv8: ls2080aqds: Config QSPI pin mux via FPGA in NAND bootYuan Yao
Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-10configs: ls2080aqds: Enable QSPI flash supportYuan Yao
Enable QSPI flash related configure options. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-10armv8: ls2080aqds: disable IFC NOR & QIXIS when QSPI enableYuan Yao
When QSPI is enabled, NOR flash and QIXIS can't be accessed through IFC due to pin mux. Enable I2C QIXIS access and I2C early init to read the sysclk and ddrclk. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-10configs: ls2080a_common: Remove duplicate NOR configsYuan Yao
The NOR flash related configure options appear in ls2080aqds.h and ls2080ardb.h, and the two files both includ ls2080a_common.h. This patch remove the duplicated options in ls2080a_common.h. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-10sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80Siarhei Siamashka
Since the SRAM C corruption issue is now resolved on Allwinner A64, it is possible to move the stack top to the address 0x1A000 on both A64 and A80. The boot ROM can load SPL binaries with up to 32 KiB size on A64 (the 24 KiB SPL size limitation only affects A10/A20), and this patch also ensures the availability of 8 KiB stack. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-06-09siemens,am33x: add draco etamin boardHeiko Schocher
In the draco CPU board family, etamin is a new variant with bigger flash and more RAM. Due to new flash that uses larger pages (4K) some changes are necessary because it impacts the MTD partition layout and the ubi mount parameters. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Heiko Schocher <hs@denx.de> [trini: Move BOOTDELAY into defconfig, just always be 3 now] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-06-09siemens,am33x: add ubi fastmap supportSamuel Egli
From: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-09am335x, shc: add support for the am335x based bosch shc boardHeiko Schocher
U-Boot SPL 2016.03-rc3-00019-g6dfb4c2-dirty (Mar 09 2016 - 07:40:06) SHC C3-Sample MPU reference clock runs at 6 MHz Setting MPU clock to 594 MHz Enabling Spread Spectrum of 18 permille for MPU Trying to boot from MMC reading u-boot.img reading u-boot.img U-Boot 2016.03-rc3-00019-g6dfb4c2-dirty (Mar 09 2016 - 07:05:35 +0100) Watchdog enabled I2C: ready DRAM: 512 MiB reloc off 1f783000 MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Net: cpsw U-Boot# Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-09common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig optionHeiko Schocher
move CONFIG_BOOTDELAY into a Kconfig option. Used for this purpose the moveconfig.py tool in tools. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2016-06-09ARM: uniphier: do not erase when updating U-Boot image in eMMC deviceMasahiro Yamada
Unlike NAND, eMMC can be re-written without erasing. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-09ARM: uniphier: support eMMC boot for PH1-LD11 and PH1-LD20Masahiro Yamada
The Boot ROM on PH1-LD11/LD20 exports built-in APIs to load images from an eMMC device. They are useful to reduce the memory footprint of SPL, rather than compiling the whole MMC framework. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-08ARM: socfpga: add support for IS1 boardPavel Machek
This adds support for IS1 board. Pretty usual socfpga board, 256MB of RAM, does not have MMC, two SPI chips, one ethernet port, two additional ethernet ports connected to the FPGA. Signed-off-by: Pavel Machek <pavel@denx.de>
2016-06-07board: ge: bx50v3: add missing partnum variableKimmo Surakka
Add missing ${partnum} to set rootdev correctly when booting from USB or MMC. Signed-off-by: Kimmo Surakka <kimmo.surakka@ge.com> [Rebased against v2016.05 and adjusted the variable name] Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
2016-06-07board: ge: bx50v3: make SATA optional and disabled by defaultAndrew Shadura
The SATA support is only useful for development and shouldn't be enabled in production, so it has to be disabled in U-boot by default. Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
generated by cgit (git 2.34.1) at 2024-12-27 18:12:46 +0000