summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2019-10-08pico-imx6ul: Add DWARF baseboard supportOtavio Salvador
This add the boot menu option for the DWARF baseboard as well as a specific config file for users which wish to use it as a pre-defined board. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08imx8qm: correct fdt_filePeng Fan
imx8qm-mek.dtb is the correct fdt file, not fsl-imx8qxp-mek.dtb Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: imx8qxp_mek: fix CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTORPeng Fan
The first stage of flash.bin is larger than 584 * 512, so when writting u-boot.itb, some data will be override. Enlarge the CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to fix boot. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: configs: Cleanup CONFIG_SECURE_BOOT commentsBreno Matheus Lima
Since commit 6e1f4d2652e7 ("arm: imx-common: add SECURE_BOOT option to Kconfig") the SECURE_BOOT option is selected through Kconfig. Cleanup comments in code to align with this change. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08Kconfig: Migrate CONFIG_CSF_SIZE to KconfigBreno Matheus Lima
Move CONFIG_CSF_SIZE to Kconfig and define default value as 0x4000. mx8mqevk requires 0x2000 add this configuration in imx8mq_evk_defconfig file. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08ARM: imx: Support larger SPL size on IMX6DQRobert Hancock
Previously the SPL size on all iMX6 platforms was restricted to 68KB because the OCRAM size on iMX6SL/DL parts is only 128KB. However, the other iMX6 variants have 256KB of OCRAM. Add an option CONFIG_MX6_OCRAM_256KB which allows using the full size on boards which don't need to support the SL/DL variants. This allows for an SPL size of 196KB, which makes it much easier to use configurations such as SPL with driver model and FDT control. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Tested-by: Adam Ford <aford173@gmail.com> #imx6q_logic
2019-10-08imx: mx6ul_14x14_evk: convert to DM_VIDEOPeng Fan
To support DM_VIDEO, Add display node for lcdif Drop board iomuxc settings. Enable DM_VIDEO Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-08imx: add i.MX6ULZ boardPeng Fan
Add i.MX6ULZ board support. the i.MX6ULZ is SW compatible with i.MX6ULL. so most code of i.MX6ULL can be reused by i.MX6ULZ. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08microblaze: Setup reasonable maximum bootm lenMichal Simek
We are far from 8MB default size. Setup 64MB for now. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08microblaze: Enable cache by defaultMichal Simek
The whole cache code needs to be redesign to read information about cache from DT instead of macro selection. Enable caches by default because systems have caches on by default for Linux. Also enable CMD_CACHE to be able to disable cache if there is any issue. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08microblaze: Move CONFIG_LMB from board file to config.hMichal Simek
It is common for the whole architecture that's why move it there. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08configs: apalis-tk1: Do not define CONFIG_SYS_BOOT_RAMDISK_HIGH againMichal Simek
CONFIG_SYS_BOOT_RAMDISK_HIGH is already defined in arch/arm/include/asm/config.h:10:#define CONFIG_SYS_BOOT_RAMDISK_HIGH that's why there is no reason to define it again in board file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Remove all Xilinx private commandsMichal Simek
All platforms have been moved to distro boot that's why remove the rest of configurations to have unified boot flow. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Use {} around variables for qspi and nand boot cmdsMichal Simek
Follow conventions and used {} around variables. Fixes: 90e97ab31e02 ("arm: zynq: Define distro boot commnads for qspi, nand and nor") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Fix NOR boot modeMichal Simek
There are two typos in this command that's why it couldn't work properly. This bootmode is almost unused from the beggining on this SoC. Fixes: 90e97ab31e02 ("arm: zynq: Define distro boot commnads for qspi, nand and nor") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Enable USB1 as secondary boot deviceMichal Simek
Xilinx Zynq SoC has two usb controllers and both could be used as secondary boot method. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Specify MMC controller number for boot sequenceMichal Simek
Xilinx Zynq SoC has two sdhci controllers but boot is only possible from the first one. That's why there is a need to specify controller number. mmc1 is supposed to be secondary boot device and should be also listed in distribution boot. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: versal: Fix for OCM overwriting issueAshok Reddy Soma
This patch reduces the console buffer size from 2048 to 1024, thus fixes OCM overwriting issue. Differences are in bss section as is shown from output: xilinx_versal_mini: all -2056 bss -2048 text -8 u-boot: add: 0/0, grow: 0/-3 bytes: 0/-2056 (-2056) function old new delta cli_simple_run_command 340 332 -8 static.lastcommand 2049 1025 -1024 console_buffer 2049 1025 -1024 Better would be to use PPU RAM but this change is also aligned with changes done in ZynqMP mini configurations. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Increase input buffer console size to 2kMichal Simek
ZynqMP and Versal is using 2k that's why aligned all platform together to be able to use the same scripts. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Increase init ram size by 4KSiva Durga Prasad Paladugu
Increase init ram size by 4K such that more stack space will be available during initialization as the present stackspace is not sufficient if DEBUG option is enabled and causes system hang. Increasing init ram size provides sufficient stack space during init even if DEBUG enabled and solves the hang issue. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Do not enable NETBSD support by defaultMichal Simek
This option is disable in Xilinx tree for quite a long time that's why let's disable it in mainline. If there is anybody who requires this options then it should be moved to Kconfig first and should be removed from this config. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Add new jtag distro boot commandSiva Durga Prasad Paladugu
This patch adds new jtag distro boot command to look for bootscript file in DDR and execute it first incase of jtag bootmode. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Update scriptaddr value to 512MBSiva Durga Prasad Paladugu
This patch updates scriptaddr value to 512MB as having it at 32MB has high chance of script corruption incase of bigger kernel. Be aware that 512MB is used for SPL malloc area that's why images should be loaded after SPL (the best after u-boot relocation). Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: versal: Change boot script offset address in versalT Karthik Reddy
With the current boot script offset address in qspi is being overlaped by BOOT.BIN as it is over 90MB with fpga included. So moving the script offset address to end of flash after "bootenv" mtd partition. Here we are considering qspi flash size >= 128Mbytes on versal and left 512Kbytes space to save boot.scr script. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: versal: Add new dfu usb distro boot commandT Karthik Reddy
This patch adds new dfu usb distro boot command to look for bootscript from dfu-util and runs it. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
2019-10-08arm64: versal: Add new jtag distro boot commandSiva Durga Prasad Paladugu
This patch adds new jtag distro boot command to look for bootscript file in DDR and execute it first incase of jtag bootmode. This patch also updates scriptaddr to 512MB as there is high of script corruption incase of bigger kernel image. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: versal: Define configs related to USB DFU functionalitySiva Durga Prasad Paladugu
This patch defines macros required for DFU functionality for Xilinx Versal platform. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Set initrd_high to as high as possibleT Karthik Reddy
This patch is setting up the initrd_high to as high as possible by leaving max stack size for u-boot so that bigger rootfs can also be loaded by u-boot for booting kernel. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: versal: Set initrd_high to as high as possibleSiva Durga Prasad Paladugu
This patch is setting up the initrd_high to as high as possible by leaving max stack size for u-boot so that bigger rootfs can also be loaded by u-boot for booting kernel. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08configs: sam9x60ek: Add QSPI_BOOT definesTudor Ambarus
Cope with the offsets defined at: https://www.at91.com/linux4sam/pub/Linux4SAM/SambaSubsections/demo_nandflash_map_lnx4sam6x.png The environment starts at 0x140000 and it's of size 0x20000. The device tree starts at 0x180000 and it's of size 0x80000. The zImage starts at 0x200000 and it's of size 0x600000. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08board: sam9x60ek: Add NAND flash supportTudor Ambarus
- EBI Chip Select Register is now in SFR, - the pins are set to default values, - timings are matching MT29F4G08BABWP's nand flash requirements. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08board: atmel: Add sam9x60ek boardSandeep Sheriker Mallikarjun
Add new board SAM9X60-EK using the ARM926 SAM9X60 SoC. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com> [tudor.ambarus@microchip.com: - fix number of DRAM banks: One DDR2-SDRAM (W972GG6KB 2 Gbit = 16 Mbit x 16 x 8 banks] - drop SPL related macros - drop memtest macros - drop CONFIG_SPI_BOOT, CONFIG_SYS_USE_DATAFLASH related macros - drop inclusion of asm/arch/at91sam9_smc.h] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08board: atmel: sama5d27_wlsom1_ek: fix SPL OFFS on SPIEugen Hristev
Fixes redefinition of CONFIG_SYS_SPI_U_BOOT_OFFS This is now a Kconfig Fixes: e40a9ba6d2d5 ("board: atmel: sama5d2_wlsom1_ek: add qspi support and qspi boot config") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08board: atmel: sama5d2_wlsom1_ek: add qspi support and qspi boot configEugen Hristev
Add support for qspi memory on board. Created boot support for QSPI for both u-boot proper and SPL. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08board: atmel: sama5d2_wlsom1_ek: add SPL supportEugen Hristev
Add support for SPL for this board: DRAM initialization, PMC initialization, MMC boot. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08board: atmel: add sama5d27_wlsom1_ek boardNicolas Ferre
Add support for the SAMA5D27-WLSOM1-EK. It's based on the Microchip WireLess SoM which contains the SAMa5D27 LPDDR2 2Gbits SiP. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> [eugen.hristev@microchip.com]: added u-boot specific dtsi and ported to 2019.10 Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08arm: mxs: Correct CONFIG_SPL_NO_CPU_SUPPORT optionSimon Glass
At present this is defined in Kconfig but there is a separate one in the CONFIG whitelist. It looks like these are duplicates. Rename the non-Kconfig one and remove it from the whitelist. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08watchdog: move WATCHDOG_TIMEOUT_MSECS to KconfigHeiko Schocher
move WATCHDOG_TIMEOUT_MSECS to Kconfig and fix all board defconfigs. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Martyn Welch <martyn.welch@collabora.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-10-04Kconfig: Migrate CONFIG_BOOTM_* optionsTom Rini
Migrate all of the existing OS support options that are under CONFIG_BOOTM_* to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-04ARM: keystone2: update the default addresses of the secure monitorJean-Jacques Hiblot
To accommodate the growth of u-boot, we need to shift the location of the secure monitor. Moving it 64kB further. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-09-30at91: configs: Drop duplication of defconfig macrosTudor Ambarus
'commit a9221f3ebd6d ("at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs")' migrated CONFIG_ENV_ macros to defconfigs but did not remove the identical redefinition of these macros in include/configs/. Since the duplicated macros have the same value as the ones in defconfigs, no "redefined" warnings were raised. Remove duplicated macros for all sama5 and sam9x5ek boards. While verifying that the removal of the macros from include/configs did not change the same macros in defconfigs, overwrite the old defconfig by saving them with the output from "make arch=ARM savedefconfig". This resulted in the movement of some macros in the defconfig files. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-09-22Merge tag 'fixes-for-2019.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video.git - fix sunxi LCD clock divider - fix splash logo with DM_VIDEO and CONFIG_VIDEO_LOGO - fix splash banner output with DM_VIDEO
2019-09-21imx: colibri_imx6: fix splash logo drawingAnatolij Gustschin
Define "splashimage" variable in the default environment to enable splash screen drawing. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21imx: icore: fix splash logo drawingAnatolij Gustschin
Define "splashimage" variable in the default environment and enable BMP code. Also configure white on black for video console. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21imx: apalis_imx6: fix splash logo drawingAnatolij Gustschin
Define "splashimage" variable in the default environment to enable splash screen drawing. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21imx: mx6sabresd: fix splash logo drawingAnatolij Gustschin
After mxc_ipuv3 DM_VIDEO conversion showing splash image doesn't work. Fix this. Also enable white on black console configuration as it used to be with cfb_console driver. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reported-by: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Estevam <festevam@gmail.com>
2019-09-21imx: wandboard: fix splash logo drawingAnatolij Gustschin
After mxc_ipuv3 DM_VIDEO conversion showing splash image doesn't work. Fix this. Also enable white on black console configuration as it used to be with cfb_console driver. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-19configs: rk3288: Increase bootm lengthJagan Teki
Increase bootm length to 64MB satisfy max gunzip size, even other rockchip and know SoC are following same length check. Reported-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-16Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add emmc hs200 support - Few bug fixes related to serdes, I2C, ethernet, etc
2019-09-13configs: ti: Add environment support commands for FIT loadingAndrew F. Davis
Some parts of these commands can be reused, add them to common files. Signed-off-by: Andrew F. Davis <afd@ti.com>
generated by cgit (git 2.34.1) at 2025-01-02 21:17:28 +0000