summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2013-05-02powerpc/85xx: set USB2 default mode to 'device' for (super)hydra boardsShaohui Xie
The Hydra and Superhydra (P3041DS, P5020DS, and P5040DS) boards have a second USB port that can be configured in either host, peripheral (aka device), or OTG (on-the-go) mode. When configured in host mode, if the port is connected to another USB host, damage to the board can occur. To avoid this, we change the default setting to peripheral mode. Ideally, we'd set it to OTG mode, but currently there is no OTG support for these boards. Setting the hwconfig variable will also update the device tree, and so Linux will configure the port for peripheral mode as well. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Timur Tabi <timur@tabi.org> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-02powerpc/p1022ds: Add support for NAND and NAND boot using SPLMatthew McClintock
Add defines needed to access NAND, remove second flash bank that is actually connected to NAND. Add nand booting support for P1022DS with hardcoded DDR config using SPL framework from 2011 Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Jiang Yutang <b14898@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-02Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxTom Rini
2013-05-02mpc5200: a3m071/a4m2k: Miscellaneous updates and fixesStefan Roese
The changes to a3m071/a4m2k in summary are: - Enable CAN1 on I2C in GPS Port Configuration - Enable SPI on PSC2 - Activate network console - New flash partitioning - Fix some typos - Pass host name to Linux - Change rootfs to squashfs,jffs2 - Enable UBI/UBIFS support - Enable FIT support Signed-off-by: Stefan Roese <sr@denx.de>
2013-05-02mpc5200: a3m071/a4m2k: Fix problem with increased global_data structStefan Roese
The v2013.04 release has this patch set included: 5cb48582 "Add architecture-specific global data" With this, the global_data struct is now common and new variables have been added. Resulting in a bigger struct. Unfortunately the currently allocated 128 bytes are just a bit too small for this new struct. This patch now uses the automatically generated struct size instead to not run into this problem again. Please note that this problem might hit some other platforms which currently reserve a tight space of 128 bytes for the global_data struct! Signed-off-by: Stefan Roese <sr@denx.de>
2013-05-02mpc5200: a3m071/a4m2k: Enable flash verify optionStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2013-05-01omap5_uevm: Enable redundant MMC environmentTom Rini
Cc: Sricharan R <r.sricharan@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
2013-05-01mx28evk: Guard NAND-related ENV defines with CONFIG_ENV_IS_IN_NANDTom Rini
The redundancy related defines are only correct for NAND, so guard all of that area with CONFIG_ENV_IS_IN_NAND Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Tom Rini <trini@ti.com>
2013-05-01tx25: add CONFIG_SPL_LIBGENERIC_SUPPORTAndreas Bießmann
In order to use the generic hang() later on pull libgeneric in SPL. This has no impact on the SPL size. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-05-01mx31pdk: add CONFIG_SPL_LIBGENERIC_SUPPORTAndreas Bießmann
In order to use the generic hang() later on pull libgeneric in SPL. This has no impact on the SPL size. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-05-01amcc-common.h: enable support for "env grep", "setexpr", and regex.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Stefan Roese <sr@denx.de>
2013-05-01amcc-common.h: minor white space cleanupWolfgang Denk
Align some comments. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Stefan Roese <sr@denx.de>
2013-05-01m28evk: enable "env grep" and regexp supportWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> Conflicts: include/configs/m28evk.h
2013-05-01m28evk: white space cleanupWolfgang Denk
Change all "#define<TAB>" sequences into "#define<SPACE>" Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2013-05-01sandbox: config: Enable CONFIG_FIT and CONFIG_CMD_FITSimon Glass
Enable these options to use FITs on sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-01sandbox: Add CONFIG_OF_HOSTFILE to read FDT from host fileSimon Glass
With sandbox it is tricky to add an FDT to the image at build time (or later) since we build an ELF file, not a plain binary, and the address space of the whole U-Boot is not accessible in the emulated memory map of sandbox. Sandbox can read files directly from the host, though, so add an option to read an FDT from a host file on start-up. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-01sandbox: Switch over to generic boardSimon Glass
Add generic board support for sandbox. and remove the old board init code. Select CONFIG_SYS_GENERIC_BOARD for sandbox now that this is supported. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
2013-05-01Merge branch 'microblaze' of git://www.denx.de/git/u-boot-microblazeTom Rini
2013-04-30i2c: zynq: Add support for Xilinx ZynqMichal Simek
Support Xilinx Zynq i2c controller. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@ti.com>
2013-04-30mmc: Add support for Xilinx Zynq sdhci controllerMichal Simek
Add support for SD, MMC and eMMC card on Xilinx Zynq. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
2013-04-30net: gem: Pass phy address to initDavid Andrey
Pass the PHY address to the driver init to allow parallel use of both interfaces Signed-off-by: David Andrey <david.andrey@netmodule.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
2013-04-30zynq: Move macros to hardware.hMichal Simek
Add all fixed addresses to hardware.h and change petalinux configuration to support this. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
2013-04-30zynq: Move scutimer baseaddr to hardware.hMichal Simek
Move baseaddr to hardware.h to be shared between configurations. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
2013-04-30watchdog: Add support for Xilinx Microblaze watchdogMichal Simek
Watchdog can be used on Microblaze, PPC and Zynq hw designs. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
2013-04-30microblaze: Enable netconsoleMichal Simek
Setup environment and enable netconsole. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
2013-04-28nitrogen6x: Enable support for ocotpBenoît Thébaudeau
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-04-28mx6qsabrelite: Enable support for ocotpBenoît Thébaudeau
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-04-28mx51evk: Enable support for iimBenoît Thébaudeau
This allows to test the iim driver in the mainline tree. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-04-28mpc: iim: Switch to common fsl_iimBenoît Thébaudeau
Make all mpc512x code point to the new common fsl_iim driver, and remove the former mpc512x-specific iim driver. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-04-26mx53ard: Rework default environment to support FDT, MMC and netbootOtavio Salvador
This reworks the environment settings to be aligned with the other i.MX boards. The loadaddr has been changed to allow the Freescale kernel and mainline kernel to work without environment changes. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-04-25mx5: Select CONFIG_REVISION_TAGFabio Estevam
FSL 2.6.35 kernel expects that revision tag is passed by the bootloader. Select CONFIG_REVISION_TAG so that mx53 boards can work properly with 2.6.35. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
2013-04-25mx51evk: Do not force the rootfs typeFabio Estevam
Currently mmcrootfstype is set to ext3 type. It is better not to force it in the env vars, because users may prefer a different file system type, so let's get rid of 'mmcrootfstype'. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2013-04-25mx51evk: Update environment in order to allow booting a dt kernelFabio Estevam
Update the environment as done in other imx boards to allow easy switching between booting a non-dt kernel and a dt kernel. Change CONFIG_LOADADDR to 0x92000000, so that we can have the: - uImage at 0x92000000 - imx51-babbage.dtb at 0x91000000 ,which are adequate locations in RAM to avoid overlapping. Boot tested the following kernels: - 2.6.35 from FSL (11.09 branch) - 3.9-rc7 non-dt - 3.9-rc7 dt Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2013-04-25wandboard: Add boot selection supportOtavio Salvador
Adds support for 'bmode' command which let user to choose where to boot from; this allows U-Boot to load system from another storage without messing with jumpers. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-04-25wandboard: Add support for Carrier Board MicroSD cardOtavio Salvador
Allow use of the carrier board MicroSD card available in the Wandboard; this allow for loading alternative system from the other card for testing or upgrade proposes. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-04-25wandboard: Add update_sd_firmware supportOtavio Salvador
This allow for easy update of firmware in the SD card from a running U-Boot. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-04-25wandboard: Use env storage info for mmcdev/mmcpartOtavio Salvador
This makes environment and mmcdev/mmcpart in sync with SYS_MMC_ENV_DEV and SYS_MMC_ENV_PART settings. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-04-25mx6qsabre{sd, auto}: Add update_sd_firmware supportOtavio Salvador
This allow for easy update of firmware in the SD card from a running U-Boot. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-04-22imx: Add titanium board support (i.MX6 based)Stefan Roese
Titanium is a i.MX6 based board from ProjectionDesign / Barco. This patch adds support for this board with the newly introduced NAND support for i.MX6. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
2013-04-22mx6sl: Add initial support for mx6slevk boardFabio Estevam
mx6slevk board is a development board from Freescale based on the mx6 solo-lite processor. For details about mx6slevk, please refer to: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=IMX6SLEVK&parentCode=i.MX6SL&fpsp=1 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-04-22ppc4xx: Add lcd4_lwmon5 supportStefan Roese
This patch adds the fast booting LWMON5 derivat "lcd4_lwmon5". Its a stripped down version of the full blown lwmon5 support, without ECC, USB, POST and some other stuff. It used the newly introduced SPL infrastrucure for SPL from NOR flash booting on the PPC4xx. By setting the environment variable "boot_os" to "yes", Linux will be started from the SPL version. If not, the "normal" U-Boot will be started. Signed-off-by: Stefan Roese <sr@denx.de>
2013-04-21Merge branch 'next'Stefano Babic
2013-04-18Merge branch 'master' of git://git.denx.de/u-boot-arm into HEADTom Rini
Quick manual fixup to merge the USB boot related defines and TPM related defines. Conflicts: include/configs/exynos5250-dt.h Signed-off-by: Tom Rini <trini@ti.com>
2013-04-17ARM: mx6: define CONFIG_ARM_ERRATA_742230Shawn Guo
The ARM errata 742230 - "ARM errata: DMB operation may be faulty" is claimed for Cortex-A9 (r1p0..r2p2). Though i.MX6 uses a newer revision than r2p2, we are seeing a reboot failure on i.MX6 SMP build that can be fixed by applying the workaround for this errata. So for safety, let's define CONFIG_ARM_ERRATA_742230 to enable the workaround on i.MX6. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-17Exynos5: Add support for USB download boot modeVivek Gautam
Exynos5250 supports secondary USB device boot mode. If the iROM fails to download u-boot from the primary boot device (such as SD or eMMC), it will try to retrieve from the secondary boot device (such as USB). Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-04-16mx28evk: add trimffs to nand commandEric Benard
this is usefull when writing an UBI image which contains and UBIFS volume (check README.nand and UBI FAQ for more details) Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2013-04-15x86: config: Init PCI before SPISimon Glass
Since the ICH SPI controller uses PCI, we must ensure that PCI is available before it is inited. This fixes the current "ICH SPI: Cannot find device" message on boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-04-15Tegra: T30: Beaver board support.Tom Warren
Beaver is a Tegra30 board that is nearly 100% compatible w/Cardhu. Add a Beaver build so it can begin to be differentiated, if need be. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-04-15Tegra: TEC: Enable boot script supportThierry Reding
Boot script support brings TEC in line with other Tegra boards. To enable booting a Linux kernel with initial ramdisk, also include support for the new FIT image type. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-04-15Tegra: Plutux: Enable NAND and boot script supportThierry Reding
Boot script support brings Plutux in line with other Tegra boards. In order to enable booting a Linux kernel with initial ramdisk, also add support for the new FIT image type. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
generated by cgit (git 2.34.1) at 2025-02-10 01:13:13 +0000