summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2017-07-06avr32: Retire AVR32 for goodAndy Shevchenko
AVR32 is gone. It's already more than two years for no support in Buildroot, even longer there is no support in GCC (last version is heavily patched 4.2.4). Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully). There is no good point to keep this support in U-Boot either. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-03powerpc: remove 4xx supportHeiko Schocher
There was for long time no activity in the 4xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 4xx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-29Merge git://git.denx.de/u-boot-arcTom Rini
2017-06-29ARM: at91: ma5d4: Support both SF and eMMC SoMsMarek Vasut
Discern the SoMs based on the presence of SPI flash to support both variants of the SoM, one booting from SPI NOR and one booting from eMMC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
2017-06-29ARM: at91: ma5d4: Switch environment start to eMMCMarek Vasut
The redesigned version of the SoM which was released onto the market does no longer contain SPI flash, but boots from the eMMC. Move the environment storage to the eMMC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
2017-06-29ARM: at91: ma5d4: Enable support for booting from eMMCMarek Vasut
The SoM has been redesigned to work around bug in the SoC and is now capable of booting from the eMMC. Add support for booting from eMMC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
2017-06-29ARM: at91: ma5d4: Swap SD/MMC controller orderMarek Vasut
The SDHCI1 is the primary boot controller on rev. 2.1 SoM, which is the version available on the market. Swap the controller order to match this and future versions of the SoM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
2017-06-29ARM: at91: ma5d4: Enable DFU and UMSMarek Vasut
Enable DFU and USB mass storage support for the DENX MA5D4 SoM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
2017-06-29ARM: atmel: Rename MA5D4EVKMarek Vasut
The board is now manufactured by Aries Embedded GmbH , rename it. Signed-off-by: Marek Vasut <marex@denx.de>
2017-06-29arc: Add support for HS Development Kit boardAlexey Brodkin
ARC HS Development Kit board is a new low-cost development platform sporting ARC HS38 in real silicon with nice set of features such as: * Quad-core ARC HS38 with 512 kB L2 cache and running @1GHz * 4Gb of DDR (we use only lowest 1Gb out of it now) * Lots of DesigWare peripherals * Different connectivity modules: - Synopsys HAPS HT3 - Arduino-compatible connector - MikroBUS This initial commit supports the following peripherals: * UART (DW 8250) * Ethernet (DW GMAC) * SD/MMC (DW Mobile Storage) * USB 1.1 & 2.0 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-06-29axs10x: Move environment from I2C EEPROM to SD-cardAlexey Brodkin
With deprecation of I2C EEPROM we we left without a permamnent storage for U-Boot environment, but luckily we may simply use SD-card with FAT partition for that. Having environment on SD-card is much more convenient as it allows us to preserve all the settings when moving from one board to another. Moreover instead of 256 bytes of EEPROM we're now virtually unlimited in stuff being placed in environment like complicated scripts etc which are usually required in case of full-scale distros. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-06-29axs10x: Get rid of both I2C and EEPROM who used to use I2CAlexey Brodkin
With eb5ba3aefdf0 "i2c: Drop use of CONFIG_I2C_HARD" in place we cannot use I2C EEPROM any longer so we're dropping all references to both EEPROM and I2C which was only used for EEPROM. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Simon Glass <sjg@chromium.org>
2017-06-29boards: axs10x, nsim, tb100: Enable cmdline historyAlexey Brodkin
Enable shell commands history on ARC boards for more convenience of users. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-06-29atmel, at91: fix smartweb boardHeiko Schocher
since commit: f8b7fff1d5c5 "serial: atmel_usart: Add clk support" smartweb board comes not up anymore. Fix it. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
2017-06-28ti816x: Enable ethernet supportTom Rini
The ti816x SoC revision of the ethernet IP block is handled by the "davinci_emac" driver, rather than the "cpsw" driver as done by later members of the family. Enable the relevant plumbing. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-27Merge git://www.denx.de/git/u-boot-imxTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: include/configs/imx6qdl_icore_rqs.h include/configs/imx6ul_geam.h include/configs/imx6ul_isiot.h
2017-06-23Merge branch 'master' of git://git.denx.de/u-boot-rockchipTom Rini
2017-06-23rockchip: rk3399: correct SPL_MAX_SIZEKever Yang
The SPL_MAX_SIZE is the internal memory size minux the space used by bootrom. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-06-23atmel, at91: fix corvus boardHeiko Schocher
since commit: f8b7fff1d5c5 "serial: atmel_usart: Add clk support" corvus board comes not up anymore. Fix it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-23arm: omap: Extract OMAP5 boot environment to separate fileSemen Protsenko
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-22x86: Remove CONFIG_USB_MAX_CONTROLLER_COUNTBin Meng
As all x86 boards have been switched over to use DM USB, remove CONFIG_USB_MAX_CONTROLLER_COUNT which is not used by DM USB. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de>
2017-06-22x86: minnowmax: Configure GPIO pins to turn on USB ports VBUSBin Meng
GPIO bank E pin 8 & 9 are used to control the on-board two USB ports VBUS on/off. Let's configure them in the misc_init_r(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de>
2017-06-21Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini
2017-06-20arm: zynq: Move CONFIG_SF_DUAL_FLASH to defconfigMike Looijmans
Move the only use of CONFIG_SF_DUAL_FLASH to defconfig. This makes the associated topic_miamiplus.h header obsolete, so remove that as well. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20arm64: zynqmp: Check pmufw versionMichal Simek
If PMUFW version is not v0.3 then panic. ZynqMP switch to CCF based clock driver which requires PMUFW to be present at certain version. This patch ensure that you use correct and tested PMUFW binary. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20arm64: zynqmp: Decrease MALLOC size for SPLMichal Simek
Decrease malloc size to 1MB from 256MB. Huge malloc space is adding huge delay in mem_malloc_init() because we are enabling CONFIG_SYS_MALLOC_CLEAR_ON_INIT which clear the whole malloc space. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19arm64: zynqmp: Remove CPU_RELEASE_ADDR macroMichal Simek
CPU_RELEASE_ADDR is used only when CONFIG_ARMV8_MULTIENTRY is enabled. ZynqMP is running ATF which takes care about this that's why no need to have this macro. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19odroid: remove CONFIG_DM_I2C_COMPAT configJaehoon Chung
Remove the CONFIG_DM_I2C_COMPAT config. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-06-16powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512xHeiko Schocher
There was for long time no activity in the mpx5xxx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in mpc5xxx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16board/BuR/brxre1: refactor default environmentHannes Schmelzer
For better readability and setup-handling we refactor the default environment. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: cosmetic cleanup of config-headerHannes Schmelzer
Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: drop obsolete CONFIG_LCD_NOSTDOUT from config-headerHannes Schmelzer
This define isn't used anymore in the u-boot source tree, so we drop it from the config header. We drop it also from the 'config_whitelist.txt' Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: drop bootlogo featureHannes Schmelzer
the BMP logo loading has become obsolete and is not used any more. So we drop the support for it. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: fix MMC bootHannes Schmelzer
since commit 'd5abcf94c7123167725fc22ace342f0d455093c1' - ti: boot: Register the MMC controllers in SPL in the same way as in u-boot MMC boot on brxre1 board is broken, with this commit we make our board working again. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-06-14Merge git://git.denx.de/u-boot-mpc85xxTom Rini
2017-06-14Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
2017-06-12ARM: tegra: remove Whistler supportStephen Warren
Whistler is an ancient Tegra 2 reference board. I may have been the only person who ever used it with upstream software, and I've just recycled the board hardware. Hence, it makes sense to remove support from software. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2017-06-12powerpc: mpc8568mds: Update board configYork Sun
Enable DHCP command by default. Move environmental variable location to before U-Boot image. Enlarge reserved mem for malloc. Update maintainer. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8544ds: Fix environmental variable locationYork Sun
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8641hpcn: Enable DHCP command and DDR debugYork Sun
Enable DHCP command to make TFTP easier. Enable DDR interactive debug by default. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12arm: am57xx: Keep environment in eMMCSemen Protsenko
Use eMMC (instead of SD card) to store U-Boot environment. Use "reserved" partition for U-Boot environment. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com>
2017-06-12arm: dra7: Increase "bootloader" partition sizeSemen Protsenko
Increase the size of u-boot.img, so that it conforms with new DFU configuration (see commit [1]). [1] 7a53a1a8115b ARM: ti: Update layout for MMC and eMMC (env and dfu) Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-12arm: am57xx: Increase "bootloader" partition sizeSemen Protsenko
Increase the size of u-boot.img, so that it conforms with new DFU configuration (see commit [1]). [1] 7a53a1a8115b ARM: ti: Update layout for MMC and eMMC (env and dfu) Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-12powerpc, 5xx: remove support for 5xxHeiko Schocher
There was for long time no activity in the 5xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 5xx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12powerpc, 8260: remove support for mpc8260Heiko Schocher
There was for long time no activity in the 8260 area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8260, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12powerpc, 8xx: remove support for 8xxHeiko Schocher
There was for long time no activity in the 8xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8xx, so remove it (with a heavy heart, knowing that I remove here the root of U-Boot). Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-10Merge git://git.denx.de/u-boot-dmTom Rini
2017-06-09am33xx: Finish migration of CONFIG_AM33XX/AM43XXTom Rini
Almost all users of CONFIG_AM33XX/AM43XX have been migrated. Finish moving the last few over to Kconfig, and put all of the boards under the appropriate Kconfig chocie now. This board choice is non-optional, so remove that keyword on am33xx. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-09rockchip: Enable the video display bannerSimon Glass
Show the U-Boot banner and board information on the video display during boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-09tegra: Enable CP15 initSimon Glass
At present CP15 init is disabled on tegra. Use the correct option so that this init is performed on boot. This enables the instruction cache, for example, which is critical to the machine running at full speed. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-28 23:58:54 +0000