summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2014-10-24ARM: sunxi: Add support for uart0 on port F (mmc0)Chen-Yu Tsai
Allwinner SoCs provide uart0 muxed with mmc0, which can then be used with a micro SD breakout board. On the A23, this is the only way to use uart0. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-24ARM: sunxi: Fix build break when CONFIG_MMC is not definedChen-Yu Tsai
BOOT_TARGET_DEVICES includes MMC unconditionally. This breaks when CONFIG_CMD_MMC is not defined. Use a secondary macro to conditionally include it when CONFIG_MMC is enabled, as we do for CONFIG_AHCI. This is used when we want to use uart0 from port F, which conflicts with mmc0. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-24sunxi: Add CONFIG_MACH_TYPE defines to sun4i, sun5i and sun7iHans de Goede
Many people are still using old linux-sunxi-3.4 kernels on sunxi devices, adding the proper MACH_TYPE defines for this allows people to switch to upstream u-boot, so that we can stop maintaining the linux-sunxi u-boot fork. These machine-ids are all properly registered at: http://www.arm.linux.org.uk/developer/machines/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-24sunxi: Add mmc card-detect functionalityHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-24ARM: sunxi: Add basic A31 supportMaxime Ripard
Add a new sun6i machine that supports UART and MMC. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: use SPDX labels, adapt to Kconfig system, drop ifdef around mmc and smp code, drop MACH_TYPE] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-24ARM: sunxi: Fix build break when CONFIG_USB_EHCI is not definedChen-Yu Tsai
BOOT_TARGET_DEVICES includes USB unconditionally. This breaks when CONFIG_CMD_USB is not defined. Use a secondary macro to conditionally include it when CONFIG_EHCI is enabled, as we do for CONFIG_AHCI. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-23Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
2014-10-23kconfig: move CONFIG_USE_PRIVATE_LIBGCC to KconfigMasahiro Yamada
The private libgcc is supported only on ARM, MIPS, PowerPC, SH, x86. Those architectures should "select" HAVE_PRIVATE_LIBGCC and CONFIG_USE_PRIVATE_LIBGCC should depend on it. Currently, this option is enabled on Tegra boards and x86 architecture. Move the definition from header files to Kconfig. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com>
2014-10-23kconfig: move CONFIG_SYS_HZ to lib/KconfigMasahiro Yamada
CONFIG_SYS_HZ is always defined as 1000 in config_fallbacks.h (but some boards still have redundant definitions). This commit moves the definition and the document in README to Kconfig. Since lib/Kconfig can assure that CONFIG_SYS_HZ is 1000, the sanity check in lib/time.c should be removed. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Marek Vasut <marex@denx.de>
2014-10-23arm: armada-xp: Add basic support for the maxBCM boardStefan Roese
The maxBCM board is equipped with the Marvell Armada-XP MV78460 SoC. It integrates an SPI NOR flash and an Marvell 88E6185 switch. Signed-off-by: Stefan Roese <sr@denx.de>
2014-10-23arm: armada-xp: Add basic support for the Marvell DB-MV784MP-GP boardStefan Roese
This patch adds basic support for the Marvell DB-MV784MP-GP evaulation board. This is the first board that uses the recently created Armada XP 78460 SoC support. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org>
2014-10-23Merge git://git.denx.de/u-boot-x86Tom Rini
2014-10-22x86: Enable FIT, ELF on corebootSimon Glass
Enable FIT support and the bootelf command. Also change the default load address to somewhere other than the normal load address of the kernel, to allow for decompression without overwriting the original file. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22x86: config: link: Display the board model on the screenSimon Glass
To get a display in U-Boot on link you must either build a coreboot that always sets it up, or use Esc-Refresh-Power to reset the machine. When we do have a display, it is nice to display the model at the top, so enable this option. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22x86: link: Tidy up the command lines optionsSimon Glass
We may as well use hush. The auto-complete option was incorrect so this was not enabled. Also expand the command line size a little and go back to the default prompt since "boot>" doesn't seem any more useful. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22x86: cros_ec: Enable cros_ec for linkSimon Glass
Add defines to enable the Chrome OS EC interface and set it up on init. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22x86: config: Enable dhcp on linkSimon Glass
The dhcp option is required to get bootp to work on the Chromebook Pixel, so enable it. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: rpi: Convert GPIO driver to driver modelSimon Glass
Convert the BCM2835 GPIO driver to use driver model, and switch over Raspberry Pi to use this, since it is the only board. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2014-10-22dm: imx: Move cm_fx6 to use driver model for serial and GPIOSimon Glass
Now that serial and GPIO are available for iMX.6, move cm_fx6 over as an example. Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
2014-10-22dm: exynos: cros_ec: Move cros_ec_spi to driver modelSimon Glass
Adjust this driver to use driver model and move smdk5420 boards over to use it. Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: sandbox: cros_ec: Move sandbox cros_ec to driver moduleSimon Glass
Adjust the sandbox cros_ec emulation driver to work with driver model, and switch over to driver model for sandbox cros_ec. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22dm: tegra: spi: Convert to driver modelSimon Glass
This converts the Tegra SPI drivers to use driver model. This is tested on: - Tegra20 - trimslice - Tegra30 - beaver - Tegra124 - dalmore (not tested on Tegra124) Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: exynos: config: Use driver model for SPI flashSimon Glass
Use driver model for exynos5 board SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22dm: sf: sandbox: Convert SPI flash driver to driver modelSimon Glass
Convert sandbox's spi flash emulation driver to use driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22exynos: universal_c210: Move to driver model soft_spiSimon Glass
Adjust this board to use the driver model soft_spi implementation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22dm: exynos: Convert SPI to driver modelSimon Glass
Move the exynos SPI driver over to driver model. This removes quite a bit of boilerplate from the driver, although it adds some for driver model. A few device tree additions are needed to make the SPI flash available. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22dm: spi: Remove SPI_INIT featureSimon Glass
This feature provides for init of a single SPI port for the soft SPI feature. It is not really compatible with driver model since it assumes a single SPI port. Also, inserting SPI init into the driver by means of a #define is not very nice. This feature is not used by any active boards, so let's remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22dm: sandbox: spi: Move to driver modelSimon Glass
Adjust the sandbox SPI driver to support driver model and move sandbox over to driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22dm: exynos: Move serial to driver modelSimon Glass
Change the Exynos serial driver to work with driver model and switch over all relevant boards to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: exynos: gpio: Convert to driver modelSimon Glass
Convert the exynos GPIO driver to driver model. This implements the generic GPIO interface but not the extra Exynos-specific functions. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: exynos: Move s5p_goni to generic boardSimon Glass
The generic board deadline is approaching, and we need this feature to enable driver model. Enable CONFIG_SYS_GENERIC_BOARD for s5p_goni. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: exynos: Move smdkc100 to generic boardSimon Glass
The generic board deadline is approaching, and we need this feature to enable driver model. Enable CONFIG_SYS_GENERIC_BOARD for smdkc100. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22arm: goni: add i2c_init_board()Robert Baldyga
Add proper initialization of GPIO pins used by software i2c. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-22tegra: apalis_t30: master revampMarcel Ziswiler
Update Apalis T30 as per the following commits c369139234c03b1494394d12cd27009f47aa6606 tegra: dts: Add serial port details 461be2f96e4b87e5065208c6659a47dd0ad9e9f8 kconfig: remove redundant "string" type in arch and board Kconfigs f1ef2b62339526df3b921bcfefd174ce76d4c624 kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-10-22tegra: colibri_t30: clean-up spurious new lineMarcel Ziswiler
Clean-up a spurious new line which got introduced resp. left behind by commit f1ef2b62339526df3b921bcfefd174ce76d4c624 kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-10-22tegra: clean-up useless defineMarcel Ziswiler
Wondering what exactly that one should bring (;-p). Looks like a remnant of the last commit 783e6a72b8278d59854ced41a4696c9a14abbb0b kconfig: move CONFIG_OF_* to Kconfig Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-10-22arm: tegra: use architecture specific memcpyMarcel Ziswiler
Use architecture specific memcpy to speed up things. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-10-22arm: tegra: initial support for apalis t30Marcel Ziswiler
This patch adds board support for the Toradex Apalis T30 a computer on module which can be used on different carrier boards. For the sake of ease of use we do not distinguish between different carrier boards for now as the base module features are deemed sufficient enough for regular booting. The following functionality is working so far: - eMMC boot and environment storage - Gigabit Ethernet (once Thierry's PCIe as well as my E1000 resp. i210 fixes hit mainline) - MMC/SD cards (both 8-bit as well as 4-bit slot) - USB client/host (dual role port as client e.g. for DFU/UMS, other two ports as host) Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-10-20Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
2014-10-16ls102x: Add support for secure boot and enable blob commandRuchika Gupta
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-10-16mpc85xx: configs - Enable blob command in freescale platformsRuchika Gupta
Enable blob commands for platforms having SEC 4.0 or greater for secure boot scenarios Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-10-16ls102x: configs - Add hash command in freescale LS1 platformsRuchika Gupta
Hardware accelerated support for SHA-1 and SHA-256 has been added. Hash command enabled along with hardware accelerated support for SHA-1 and SHA-256 for platforms which have CAAM block. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-10-16mpc85xx: configs - Add hash command in freescale platformsRuchika Gupta
Enable CAAM in platforms supporting the hardware block. Hash command enabled along with hardware accelerated support for SHA-1 and SHA-256 for platforms which have CAAM block. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-10-16powerpc/P1010RDB:Update RESET_VECTOR_ADDRESS for 768KB u-boot sizeRuchika Gupta
U-boot binary size has been increased from 512KB to 768KB. So update CONFIG_RESET_VECTOR_ADDRESS to reflect the same for P1010 SPI Flash Secure boot target. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> [York Sun: Modified subject to P1010RDB] Reviewed-by: York Sun <yorksun@freescale.com>
2014-10-16lcd: Fix build error with CONFIG_LCD_BMP_RLE8Simon Glass
Add a block to avoid a build error with the variable declaration. Enable the option on sandbox to prevent an error being introduced in future. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-11Merge branch 'u-boot-socfpga/topic/arm/socfpga-20141010' into ↵Albert ARIBAUD
'u-boot-arm/master'
2014-10-11Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD
2014-10-11arm: socfpga: Use EMAC1 on SoCDKMarek Vasut
The SoCDK uses EMAC1, not EMAC0. This patch fixes the issue. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de>
2014-10-10arm, at91: add generic board support for the taurus and corvus boardHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-10-10ARM: atmel: switch at91sam9263ek to generic boardBo Shen
Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
generated by cgit (git 2.34.1) at 2025-01-23 23:10:22 +0000