summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2016-10-02ti_armv7_common: Disable Falcon Mode on HS devicesAndrew F. Davis
Authentication of images in Falcon Mode is not supported. Do not enable SPL_OS_BOOT when TI_SECURE_DEVICE is enabled. This prevents attempting to directly load kernel images which will fail, for security reasons, on HS devices, the board is locked if a non-authenticatable image load is attempted, so we disable attempting Falcon Mode. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-10-02config: Remove usage of CONFIG_STORAGE_EMMCAndrew F. Davis
This config option seems to be unused and is probably vestigial. Remove it. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-10-02Kconfig: Separate AM33XX SOC config from target board configAndrew F. Davis
The config option AM33XX is used in several boards and should be defined as a stand-alone option for this SOC. We break this out from target boards that use this SoC and common headers then enable AM33XX on in all the boards that used these targets to eliminate any functional change with this patch. This is similar to what has already been done in 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig") and is done for the same reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-02ti_omap5_common: mark region of DRAM protected on HS partsDaniel Allred
If the ending portion of the DRAM is reserved for secure world use, then u-boot cannot use this memory for its relocation purposes. To prevent issues, we mark this memory as PRAM and this prevents it from being used by u-boot at all. Signed-off-by: Daniel Allred <d-allred@ti.com>
2016-10-01ti_armv7_keystone2: Update addr_mon variableLokesh Vutla
As boot monitor contains a mkimage header, it can be loaded at any location. So, have a common addr_mon address across all keystone2 SoCs. And also making sure that boot monitor is installed early during default boot to avoid any overlapping with other images. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-01keystone2: k2g: add env script to load firmware initramfs as part of boot flowMurali Karicheri
On K2G, the PCIe SerDes h/w is a re-use from other K2 devices and SerDes driver requires a firmware image to initialize the SerDes h/w device. This is firmware is part of the initramfs file that is loaded to memory in u-boot and passed to kernel as in other K2 platforms. This patch customize the u-boot env to have this done automatically when the K2G EVM boots up. With this, a user may be able to boot the EVM with a standard PCIe card at the x1 PCIe slot and release image and test PCIe devices such as NIC, SATA etc. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-30Merge branch 'master' of git://git.denx.de/u-boot-nds32Tom Rini
2016-09-30Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: include/configs/dra7xx_evm.h
2016-09-29nds32: Support relocation.rick
Enable pie option for relocation. Signed-off-by: rick <rick@andestech.com> Cc: Andes <uboot@andestech.com>
2016-09-27apalis_t30: colibri_imx7: colibri_t30: fix ethernet functionalityMarcel Ziswiler
Since commit aa7a648747d8c704a9a81c9e493d386930724e9d ("net: Stop including NFS overhead in defragment max") the following has been reproducibly observed while trying to transfer data over TFTP: Load address: 0x80408000 Loading: EHCI timed out on TD - token=0x8008d80 T EHCI timed out on TD - token=0x88008d80 Rx: failed to receive: -5 This patch fixes this by lowering our TFTP block size to be within the standard maximal de-fragmentation aka IP packet size again. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-09-27dra7x: configs: enable SPL-DFU supportB, Ravi
This patch enables the SPL-DFU support for dra7x platform. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-27colibri_t30: fix usb ethernet functionalityMarcel Ziswiler
Since commit aa7a648747d8c704a9a81c9e493d386930724e9d ("net: Stop including NFS overhead in defragment max") the following has been reproducibly observed while trying to transfer data over TFTP: Load address: 0x80408000 Loading: EHCI timed out on TD - token=0x8008d80 T EHCI timed out on TD - token=0x88008d80 Rx: failed to receive: -5 This patch fixes this by upping our maximal de-fragmentation aka IP packet size again. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-09-27Merge git://www.denx.de/git/u-boot-ppc4xxTom Rini
2016-09-27Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
2016-09-27CPCI4052: Remove CONFIG_AUTO_COMPLETE and custom baud rate tableTom Rini
This board is getting close to or exceeding the size limit again, remove CONFIG_AUTO_COMPLETE to save space and while in here switch to the default and slightly less complete default baudrate table. Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-09-27ARM: tegra: increase console buffer size and sys args numBryan Wu
The Linux-for-Tegra kernel uses a very long command line. The default value of CONFIG_SYS_CBSIZE is too small to printf out the long command line and causes a message like: bootarg overflow 602+0+0+1 > 512 on the console, and the board refuses to boot. The default value of CONFIG_SYS_MAXARGS is too small to add a long long command line, and the kernel won't boot without the complete bootargs. Increasing these two config options solves this problem. Signed-off-by: Bryan Wu <pengw@nvidia.com> Signed-off-by: Peter Chubb <Peter.Chubb@data61.csiro.au> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-09-27Merge git://www.denx.de/git/u-boot-marvellTom Rini
2016-09-27arm64: mvebu: Add Armada 7K db-88f7040 development board supportStefan Roese
This patch adds basic support for the Marvell Armada 7K DB-88F7040 development board. Supported are the following interfaces: - UART - SPI (incl. SPI NOR) - I2C - USB - SATA / AHCI Support for other interfaces will follow. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
2016-09-27arm64: mvebu: Add Armada 3700 db-88f3720 development board supportStefan Roese
This patch adds basic support for the Marvell Armada 3700 DB-88F3720 development board. Supported are the following interfaces: - UART - SPI (incl. SPI NOR) - I2C - Ethernet Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
2016-09-27dfu: Migrate to KconfigTom Rini
Introduce a hidden USB_FUNCTION_DFU Kconfig option and select it for CMD_DFU (as we must have the DFU command enabled to do anything DFU). Make all of the entries in drivers/dfu/Kconfig depend on CMD_DFU and add options for all of the back end choices that DFU can make use of. Cc: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-27ti_armv7_common.h: Adjust malloc pool size in all cases.Tom Rini
Previously we had been adjusting CONFIG_SYS_MALLOC_LEN based on if CONFIG_DFU_MMC has been set or not. However, for quite some time this has not been the case as we often include <configs/ti_armv7_common.h> prior to setting CONFIG_DFU_MMC so we would always use 16MiB and then not have enough room for to DFU files. Given the amount of memory we always have, setting a minimum size of 32MiB for malloc is reasonable. However, in the SPL case not only do we not need that much we start running into overlap problems and then will fail to boot. Since we don't need 16MiB in the SPL case, bring this down to 8MiB. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-26Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
trini: Drop local memset() from examples/standalone/mem_to_mem_idma2intr.c Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-26kconfig: introduce kconfig for UBIHeiko Schocher
move the UBI config options into Kconfig. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andrew F. Davis <afd@ti.com> Reviewed by: Evgeni Dobrev <evgeni at studio-punkt.com>
2016-09-26armv7: ls1021a: Convert CONFIG_LS1_DEEP_SLEEP to Kconfig optionYork Sun
Move this option to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-26armv8: ls1012a: Convert CONFIG_LS1012A to Kconfig option ARCH_LS1021AYork Sun
Move this config to Kconfig option and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Calvin Johnson <calvin.johnson@nxp.com> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-26driver: ddr: fsl_mmdc: Pass board parameters through data structureYork Sun
Instead of using multiple macros, a data structure is used to pass board-specific parameters to MMDC DDR driver. Signed-off-by: York Sun <york.sun@nxp.com> CC: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-26armv8: ls1046a: Convert CONFIG_LS1046A to Kconfig option ARCH_LS1046AYork Sun
Move this option to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Mingkai Hu <mingkai.hu@nxp.com> CC: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-25board: amcore: add update scriptsAngelo Dureghello
Add some useful update scripts. Signed-off-by: Angelo Dureghello <angelo@sysam.it> --- Changes for v.2: - Fix syntax error on upgrade_jffs2 script
2016-09-24arm: mvebu: NAND support for DB-88F6820-AMCChris Packham
Enable the NAND interface on this board. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-09-24arm: mvebu: add DB-88F6820-AMC boardChris Packham
This board is a plug in card for Marvell's switch system development kits. Form-factor aside it is similar to the DB-88F6820-GP with the following differences. - TCLK is 200MHz - SPI1 is used - No SATA - No MMC - NAND flash Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-09-22Merge git://git.denx.de/u-boot-rockchipTom Rini
2016-09-22Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2016-09-22Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini
2016-09-22rockchip: rk3288: skip lowlevel_init processXu Ziyuan
lowlevel_init() is never needed for rk3288, so drop it. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-09-22config: rk3399: add usb related configsMengDongyang
This patch to enable configs for usb module - xhci - ehci - usb storage - usb net Signed-off-by: MengDongyang <daniel.meng@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Squashed in patch to move to Kconfig: https://patchwork.ozlabs.org/patch/672543/ Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22configs: fsl: Move SPI/SPI-FLASH configs to defconfigJagan Teki
Moved FSL_QSPI/SPI/SPI-FLASH configs from include/configs into respective used defconfigs. - CONFIG_FSL_QSPI - CONFIG_SPI_FLASH - CONFIG_SPI_FLASH_BAR - CONFIG_SPI_FLASH_STMICRO Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-09-22zynqmp: Remove unnnecessary board config file for dc4Siva Durga Prasad Paladugu
Remove unnecessary board specific config file for DC4 board. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Use the same name for atf image everywhereMichal Simek
Use atf-uboot.ub image instead of atf.ub. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Enable CONFIG_AHCI via KconfigMichal Simek
Move CONFIG_AHCI to defconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Add support for DFU from SPLMichal Simek
SPL needs to have bigger stack size because of USB. Simple malloc needs to be disabled because dfu code requires different allocation functions. There is no space in OCM that's why random place in DDR is used. BOOTD must be disabled because it is causing compilation error. All variables are disabled and used only variables valid for DFU because they are simple huge. Including automatic variables added by CONFIG_ENV_VARS_UBOOT_CONFIG. Hardcode addresses for u-boot, atf, kernel and dtb just for SPL DFU code. Enable SPL DFU for zcu100. Create new usb_dfu_spl variable just to run Linux kernel loaded in SPL. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Move BSS location to the beginning of ramMichal Simek
With SPL_DFU support memory layout needs to be cleanup that's why move bss to the start of memory. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Wire up both USBs available on ZynqMPMichal Simek
The second USB wasn't enabled. This patch fixes it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-21Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini
2016-09-21boston: Introduce support for the MIPS Boston development boardPaul Burton
This patch introduces support for building U-Boot to run on the MIPS Boston development board. This is a board built around an FPGA & an Intel EG20T Platform Controller Hub, used largely as part of the development of new CPUs and their software support. It is essentially the successor to the older MIPS Malta board. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-09-21mips: Add MIPSfpga platform supportZubair Lutfullah Kakakhel
MIPSfpga is an FPGA based dev platform. In a nutshell, its a microAptiv cpu core with lots of Xilinx IP blocks The FPGA dev board used is the Nexys4DDR board by Digilent. For more information, check the Readme file in board/imgtec/xilfpga Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-09-20PowerPC: Update last users of CONFIG_ISO_STRING to KconfigTom Rini
There are a few boards that use CONFIG_ISO_STRING as part of a sanity check during firmware update at run time. Move this string to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-20PowerPC: Update MIP405/MIP405T to use Kconfig betterTom Rini
Convert CONFIG_MIP405T from SYS_EXTRA_OPTIONS to a real config There are two boards, MIP405 and MIP405T that have a few differences. Start by checking for CONFIG_TARGET_MIP405. Then introduce CONFIG_TARGET_MIP405T and use that not CONFIG_MIP405T. Next, convert also convert the usage of CONFIG_ISO_STRING to be based on Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-20Kconfig: Move config IDENT_STRING to KconfigSiva Durga Prasad Paladugu
Move the config IDENT_STRING to Kconfig and migrate all boards [sivadur: Migrate zynq boards] Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> [trini: Update configs, add some default to sunxi Kconfig] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-18Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini
2016-09-16Convert CONFIG_SPL_YMODEM_SUPPORT to KconfigSimon Glass
Convert CONFIG_SPL_YMODEM_SUPPORT to Kconfig Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-28 16:51:44 +0000