summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2017-10-12topic_miami: Remove CONFIG_CMD_BOOTZ undefFabio Estevam
CONFIG_CMD_BOOTZ option has been converted to defconfig, so there is no need to undefine it in board config file anymore. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12mx7ulp_evk: Move CONFIG_CMD_BOOTZ to KconfigFabio Estevam
CONFIG_CMD_BOOTZ symbol does not work in board config file anymore, so fix this by moving it to Kconfig. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2017-10-12mx6: toradex: Remove custom CONFIG_SPL_PAD_TO definitionFabio Estevam
CONFIG_SPL_PAD_TO is already defined inside "imx6_spl.h", so there is no need to redefine it in the board config files. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
2017-10-12mx25pdk: Remove duplicated defineOtavio Salvador
The CONFIG_SYS_MMC_ENV_DEV is duplicated, drop it. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-12mx25pdk: Use generic filesystem commandsOtavio Salvador
This rework the board to use the generic filesystem commands instead of forcing the use of FAT for the boot files. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-10Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini
2017-10-10configs: Re-sync CONFIG_CMD_IMLS with moveconfigTuomas Tynkkynen
The option is specified in Kconfig, but still a few config header files are overriding the choice by #undef'ing it. Re-sync the option with moveconfig to rid of the #undefs. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-09Merge git://git.denx.de/u-boot-videoTom Rini
2017-10-08configs: stm32: update SRAM address for STM32H7 disco and evalPatrice Chotard
As suggested by Vikas Manocha, update embedded SRAM address to use AXI SRAM available on D1 domain instead of using AHB SRAM (D2 domain). On some STM32H743 SoCs, D2 domain SRAM is accessible even if SRAMxEN bit in AHB2ENR bits are not set whereas on others SoCs version it's not accessible. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-10-08board: STiH410-B2260: set ramdisk_addr_r to 0x48000000Lee Jones
Add missing ramdisk_addr_r param and set it to 0x48000000 Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-08board: STiH410-B2260: fix sdram sizeNicolas Le Bayon
32MB are reserved for TrustZone purpose Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
2017-10-08board: STiH410-B2260: update environment variablePatrice Chotard
Update environment variable by updating: _ BOOT_TARGET_DEVICE _ CONFIGS_BOOTARGS _ kernel_addr_r, fdtfile, fdt_addr_r, scriptaddr, fdt_high, intird_high Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-07Merge git://git.denx.de/u-boot-x86Tom Rini
2017-10-07x86: edison: Bring minimal ACPI support to the boardAndy Shevchenko
This board is based on Intel Tangier SoC (Intel Merrifield platform) and may utilize ACPI powerfulness. Bring minimum support by appending initial DSDT table for it. Note, the addresses for generated tables are carefully chosen to avoid any conflicts with existing shadowed BIOS data. The user have somewhat like ~31 kB available for compiled ACPI tables that ought to be enough. Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-10-07x86: theadorable-x86-common: Move "-generic" into kernel-ver variableStefan Roese
This enables the easier usage of "-custom" kernel versions as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-07x86: theadorable-x86-common: Add further pci hotplug cmdline parametersStefan Roese
This is needed for the PCIe hotplug to work correctly on some boards. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-06ARM: Add a new arch + board for QEMU's 'virt' machineTuomas Tynkkynen
This board builds an U-Boot binary that is bootable with QEMU's 'virt' machine on ARM. The minimal QEMU command line is: qemu-system-arm -machine virt,highmem=off -bios u-boot.bin (Note that the 'highmem=off' parameter to the 'virt' machine is required for PCI to work in U-Boot.) This command line enables the following: - u-boot.bin loaded and executing in the emulated flash at address 0x0 - A generated device tree blob placed at the start of RAM - A freely configurable amount of RAM, described by the DTB - A PL011 serial port, discoverable via the DTB - An ARMv7 architected timer - PSCI for rebooting the system - A generic ECAM-based PCI host controller, discoverable via the DTB Additionally, QEMU allows plugging a bunch of useful peripherals to the PCI bus. The following ones are supported by both U-Boot and Linux: - To add a Serial ATA disk via an Intel ICH9 AHCI controller, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device ich9-ahci,id=ahci -device ide-drive,drive=mydisk,bus=ahci.0 - To add an Intel E1000 network adapter, pass e.g.: -net nic,model=e1000 -net user - To add an EHCI-compliant USB host controller, pass e.g.: -device usb-ehci,id=ehci - To add a NVMe disk, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device nvme,drive=mydisk,serial=foo Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-03sunxi: Remove the MMC index hackMaxime Ripard
The current code, if there's both an eMMC and an MMC slot available on the board, will swap the MMC indices based on whether we booted from the eMMC or the MMC. This way, the MMC we're supposed to boot on will always have the index 0. However, this causes various issues, for example when using other components that base their behaviour on the MMC index, such as fastboot. Let's remove that hack, and take the opposite approach. The MMC will always have the same index, but the bootcmd will pick the same device than the one we booted from. This is done through the introduction of the mmc_bootdev environment variable that will be filled by the board code based on the boot device informations we can get from the SoC. In order to not introduce regressions, we also need to adjust the fastboot MMC device and the environment device in order to set it to the eMMC, over the MMC, like it used to be the case. Tested-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03cmd: Move CONFIG_RANDOM_UUID to KconfigMaxime Ripard
CONFIG_RANDOM_UUID is used by the GPT command to generate random UUID when none are provided. Move that option to Kconfig. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03usb: gadget: usb_ether: Move settings to commonMaxime Ripard
The usb_ether gadget duplicates the USB settings for the manufacturer, product ID and vendor ID. Make sure we use the common option so that we can expect a single VID/PID couple for a single device. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03usb: gadget: Make g_dnl USB settings commonMaxime Ripard
The g_dnl USB settings for the vendor ID, product ID and manufacturer are actually common settings that can and should be shared by all the gadgets. Make them common by renaming them, and convert all the users. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03usb: gadget: usb_ether: Move the interfaces to KconfigMaxime Ripard
We need to select an interface for the usb_ether gadget, and they haven't been converted to Kconfig yet. Add a choice to make sure we have an option selected, and convert all the users. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03usb: gadget: Convert USB_ETHER to KconfigMaxime Ripard
The USB Ethernet gadget option has not yet been moved to Kconfig, let's deal with that. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03usb: gadget: Move USBNET_HOST_ADDR to KconfigMaxime Ripard
While the USB Ethernet device address is already defined in Kconfig, the host address isn't. Convert it. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-01evb-rk3399: avoid redefinition of CONFIG_ENV_OFFSETHeinrich Schuchardt
CONFIG_ENV_OFFSET is already defined in include/configs/rockchip-common.h For CONFIG_ROCKCHIP_BACK_TO_BROM=y we redefine CONFIG_ENV_OFFSET to an unsuitable value. We were lucky to get a compiler warning. Remove the incorrect redefinition. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rk3288: vyasa: Add falcon mode supportJagan Teki
Add Falcon mode support in vyasa rk3288 board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rk3288: vyasa: Add TPL supportJagan Teki
Since the size of SPL can't be exceeded 0x8000 bytes in RK3288, it is not possible add new SPL features like Falcon mode or etc. So add TPL stage so-that adding new features to SPL is possible. - TPL: DRAM init, clocks - SPL: MMC, falcon, etc Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-29arm: dra7xx: Fix Linux boot from eMMCSam Protsenko
Right now on OMAP5-based boards we have only one partition defined for Linux boot, which is rootfs. That doesn't work with bootpart=1:2 (that is defined in include/environment/ti/boot.h). To fix Linux boot we may either: 1. Change bootpart to be 1:1 2. Or add preceding partition, so that rootfs is actually 1:2 Second choice seems more reasonable, as DFU is already using similar partition table and can rely on bootpart to be 1:2. This patch adds "bootloader" partition. So now eMMC layout for Linux boot looks like this: offset content size partition (KiB) (KiB) Reviewed-by: Tom Rini <trini@konsulko.com> ======================================================================= 0 +--------------------------------+ | MBR/GPT header | 128 - 128 +--------------------------------+ | MLO | 256 - 384 +--------------------------------+ | u-boot.img | 1792 bootloader 2176 +--------------------------------+ | //////////// hole //////////// | 256 - 2432 +--------------------------------+ | U-Boot environment | 128 - 2560 +--------------------------------+ | U-Boot environment (redundant) | 128 - 2688 +--------------------------------+ | rootfs | remaining rootfs end +--------------------------------+ ======================================================================= Guard hole appears because U-Boot environment offset was calculated for Android partition table, which has two additional partitions in place of that hole ("environment" and "misc" partitions). This patch also changes rootfs offset from 2 MiB further to 2688 KiB, so that there won't be any collisions with U-Boot environment when we flash rootfs. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2017-09-29arm: am57xx: Fix Linux boot from eMMCSam Protsenko
Right now on OMAP5-based boards we have only one partition defined for Linux boot, which is rootfs. That doesn't work with bootpart=1:2 (that is defined in include/environment/ti/boot.h). To fix Linux boot we may either: 1. Change bootpart to be 1:1 2. Or add preceding partition, so that rootfs is actually 1:2 Second choice seems more reasonable, as DFU is already using similar partition table and can rely on bootpart to be 1:2. This patch adds "bootloader" partition. So now eMMC layout for Linux boot looks like this: offset content size partition (KiB) (KiB) Reviewed-by: Tom Rini <trini@konsulko.com> ======================================================================= 0 +--------------------------------+ | MBR/GPT header | 128 - 128 +--------------------------------+ | MLO | 256 - 384 +--------------------------------+ | u-boot.img | 1792 bootloader 2176 +--------------------------------+ | //////////// hole //////////// | 256 - 2432 +--------------------------------+ | U-Boot environment | 128 - 2560 +--------------------------------+ | U-Boot environment (redundant) | 128 - 2688 +--------------------------------+ | rootfs | remaining rootfs end +--------------------------------+ ======================================================================= Guard hole appears because U-Boot environment offset was calculated for Android partition table, which has two additional partitions in place of that hole ("environment" and "misc" partitions). This patch also changes rootfs offset from 2 MiB further to 2688 KiB, so that there won't be any collisions with U-Boot environment when we flash rootfs. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2017-09-29configs: keystone2: env: Fix burn_uboot_spi commandLokesh Vutla
Now the u-boot spi image is greater than 0x80000, increase the same in env during spi erase. Reported-by: Yan Liu <yan-liu@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-09-29configs: k2g_evm: Make findfdt command populate fdtfile variableAndrew F. Davis
On all other platforms the command 'findfdt' populates the variable 'fdtfile', but on K2G we only populate 'name_fdt'. The generic boot and automation scripts fail when 'findfdt' is not populated, fix this for K2G. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-09-29configs: am43xx_evm: Avoid relocation onto firewall at the end of DRAMAndrew F. Davis
On secure devices the initial secure software may install a firewall at the end of DRAM, define protected RAM to avoid space. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-09-29ARM: omap3: am3517-evm: Add device tree and DM supportAdam Ford
With the device tree ported from Linux 4.13, this enables Driver Model and Device Tree support for the am3517-evm Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2017-09-29ARM: da850-evm: Enable DM_I2CAdam Ford
With DM now enabled with the device tree pulled from Linux, we can enable DM_I2C in U-Boot. Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Add DM_I2C_COMPAT to da850_am18xxevm to fix warning] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-29board: at91sam9x5ek: Convert to CONFIG_DM_VIDEOWenyou Yang
Convert the board to support the video driver model, add the device tree node, and remove the unnecessary code. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-29board: sama5d4_xplained: Convert to CONFIG_DM_VIDEOWenyou Yang
Convert the board to support the video driver model, add the device tree node, and remove the unnecessary code. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-29board: sama5d4ek: Convert to CONFIG_DM_VIDEOWenyou Yang
Convert the board to support the video driver model, add the device tree node, and remove the unnecessary code. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-29board: sama5d3xek: Convert to CONFIG_DM_VIDEOWenyou Yang
Convert the board to support the video driver model, add the device tree node, and remove the unnecessary code. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-29board: sama5d2_xplained: Convert to CONFIG_DM_VIDEOWenyou Yang
Convert the board to support the video driver model, add the device tree node, and remove the unnecessary code. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-29arm: da850-evm: Enable MTD Parts in SPI FlashAdam Ford
There is a discrepency between U-Boot and Linux on the partition map. This enabes the MTD parts to pass MTD partition information from U-Boot to Linux. Linux already has a pending patch to enable MTD PARTS in davinci_all_defconfig Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Adam Ford <aford173@gmail.com>
2017-09-29arm: da850-evm: Enable DM and device tree support for da850-evmAdam Ford
With the device tree ported and DM compatible drivers, enable: OF_CONTROL, DM_SPI, DM_SPI_FLASH and DM_SERIAL Note: DM_SERIAL is not enabled for da850evm_direct_nor_defconfig yet. Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Adam Ford <aford173@gmail.com>
2017-09-28ARM: rmobile: Switch to DM PFC pinmux and GPIO driverMarek Vasut
Enable the PFC pinmux and GPIO drivers and disable the SH GPIO combo driver. This allows the drivers to obtain pinmux and GPIO configuration from DT rather than hard-coding it in board files. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-26ARM: mvebu: Convert CONFIG_MVNETA to KconfigChris Packham
This converts the following to Kconfig: CONFIG_MVNETA Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Roese <sr@denx.de>
2017-09-24ARM: rmobile: Place initial stack right below U-BootMarek Vasut
Place the stack right below U-Boot so it's not in the way in case U-Boot grows too much. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-24ARM: rmobile: Move CONFIG_CMD_ from rcar-gen3-common to configsMarek Vasut
Just move those config options from macros to configs. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-23Merge git://git.denx.de/u-boot-socfpgaTom Rini
2017-09-23ARM: socfpga: remove unneeded NAND config optionsMasahiro Yamada
CONFIG_NAND_DENALI select's CONFIG_SYS_NAND_SELF_INIT, so the NAND initialization process is driven by the driver itself. CONFIG_SYS_NAND_MAX_CHIPS and CONFIG_SYS_NAND_BASE are unused. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-22armv8: ls1043a: disable IFC in SPL only when QSPI is usedYangbo Lu
Current u-boot disables IFC support for SD boot on all ls1043a boards. Actually IFC only conflicts with QSPI on ls1043a hardware. Only when QSPI is used, IFC should be disabled. Otherwise, the u-boot with ls1043aqds_sdcard_ifc_defconfig would not work. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-22board/ls2080ardb: Add mcmemsize variable in default envPriyanka Jain
For most of ls2080ardb use-cases, mc private DRAM block is required to be of 1.75GB. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> [YS: this reservation needs to be reduced if memory is not enough] Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-22board/ls2081ardb: Update QSPI flash type from n25q512a to s25fs512sSantan Kumar
As per updated board design, different QSPI flash is connected on boards, hence change QSPI flash type from Micron n25q512a device to spansion s25fs512s device in dts and config. Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
generated by cgit (git 2.34.1) at 2024-12-24 02:36:27 +0000