summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2017-07-06avr32: Retire AVR32 for goodAndy Shevchenko
AVR32 is gone. It's already more than two years for no support in Buildroot, even longer there is no support in GCC (last version is heavily patched 4.2.4). Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully). There is no good point to keep this support in U-Boot either. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-06-16treewide: remove unneeded semicolonsMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-01string: Add strcspn()Simon Glass
Add an implementation of strcspn() which returns the number of initial characters that do not match any in a rejection list. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01string: Add strchrnul()Simon Glass
This functions works like strchr() but returns the end of the string if the character is not found. Add an implementation of this. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01Update WARN_ON() to return a valueSimon Glass
In linux v4.9 this returns a value. This saves checking the warning condition twice in some code. Update the U-Boot version to do this also. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-08arm: usb: dra7xx: xHCI registers based on USB port indexUri Mashiach
Modify the determination of the base address of xHCI registers of DRA7XX targets. Before the commit: by the target. After the commit: by the USB port index. Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Marek Vasut <marex@denx.de> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2017-04-27ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate KconfigMasahiro Yamada
In Linux, CONFIG_ARCH_OMAP2PLUS is used for OMAP2 or later SoCs. Rename CONFIG_ARCH_OMAP2 to CONFIG_ARCH_OMAP2PLUS to follow this naming. Move the OMAP2+ board/SoC choice down to mach-omap2/Kconfig to slim down the arch/arm/Kconfig level. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-04-18Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-04-18sysreset: psci: support system reset in a generic way with PSCIMasahiro Yamada
If the system is running PSCI firmware, the System Reset function (func ID: 0x80000009) is supposed to be handled by PSCI, that is, the SoC/board specific reset implementation should be moved to PSCI. U-Boot should call the PSCI service according to the arm-smccc manner. The arm-smccc is supported on ARMv7 or later. Especially, ARMv8 generation SoCs are likely to run ARM Trusted Firmware BL31. In this case, U-Boot is a non-secure world boot loader, so it should not be able to reset the system directly. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-04-18ARM: adjust arm-smccc code for use in U-BootMasahiro Yamada
Adjust ARM SMC Calling Convention code for U-Boot: - Replace the license block with SPDX - Change path to asm-offsets.h - Define UNWIND() as no-op - Add Kconfig entry - Add asm-offsets Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-04-18ARM: import arm-smccc code from Linux 4.11-rc6Masahiro Yamada
Imports ARM SMC Calling Convention code from Linux 4.11-rc6. The files have been copied as follows: [Linux] [U-Boot] arch/arm/kernel/smccc-call.S -> arch/arm/cpu/armv7/smccc-call.S arch/arm64/kernel/smccc-call.S -> arch/arm/cpu/armv8/smccc-call.S arch/arm/include/asm/opcodes* -> arch/arm/include/asm/opcodes* include/linux/arm-smccc.h -> include/linux/arm-smccc.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-04-17armv7: ls1021a: Drop macro CONFIG_LS102XAYork Sun
Use CONFIG_ARCH_LS1021A instead. Signed-off-by: York Sun <york.sun@nxp.com>
2017-04-17armv8: ls1043a: Drop macro CONFIG_LS1043AYork Sun
Use CONFIG_ARCH_LS1043A instead. Signed-off-by: York Sun <york.sun@nxp.com>
2017-04-17armv8: ls2080a: Drop macro CONFIG_LS2080AYork Sun
Use CONFIG_ARCH_LS2080A instead. Signed-off-by: York Sun <york.sun@nxp.com>
2017-04-13lib: div64: sync with LinuxPeng Fan
Sync with Linux commit ad0376eb1483b ("Merge tag 'edac_for_4.11_2'"). Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Tom Rini <trini@konsulko.com>
2017-04-05Blackfin: RemoveTom Rini
The architecture is currently unmaintained, remove. Cc: Benjamin Matthews <mben12@gmail.com> Cc: Chong Huang <chuang@ucrobotics.com> Cc: Dimitar Penev <dpn@switchfin.org> Cc: Haitao Zhang <hzhang@ucrobotics.com> Cc: I-SYST Micromodule <support@i-syst.com> Cc: M.Hasewinkel (MHA) <info@ssv-embedded.de> Cc: Marek Vasut <marex@denx.de> Cc: Martin Strubel <strubel@section5.ch> Cc: Peter Meerwald <devel@bct-electronic.com> Cc: Sonic Zhang <sonic.adi@gmail.com> Cc: Valentin Yakovenkov <yakovenkov@niistt.ru> Cc: Wojtek Skulski <info@skutek.com> Cc: Wojtek Skulski <skulski@pas.rochester.edu> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-29bitops.h: Include bitsperlong.h as needed for GENMASK_ULLStefan Roese
The macro GENMASK_ULL needs the BITS_PER_LONG_LONG macro which is defined in the bitsperlong.h header. Lets include this header as the upcoming A7k/8k support in the Marvell mvpp2 ethernet driver uses this macro. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-19Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-01-18fsl/usb: enable usb feature for ls1046ardbjerry.huang@nxp.com
Enable usb feature for ls1046ardb Signed-off-by: Changming Huang <jerry.huang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-01-14iopoll: import include/linux/iopoll.h from Linux 4.9Masahiro Yamada
This was imported from Linux 4.9 and adjusted for U-Boot. - Replace the license block with SPDX - Drop all *_atomic variants, which make no sense for U-Boot - Remove the sleep_us argument, which makes no sense for U-Boot Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-14typecheck: import include/linux/typecheck.h from Linux 4.9Masahiro Yamada
Copied from Linux 4.9. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-14delay: collect {m, n, u}delay declarations to include/linux/delay.hMasahiro Yamada
Currently, mdelay() and udelay() are declared in include/common.h, while ndelay() in include/linux/compat.h. It would be nice to collect them into include/linux/delay.h like Linux. While we are here, fix the ndelay() implementation; I used the DIV_ROUND_UP() instead of (x)/1000 because it must wait *longer* than the given period of time. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-03usb: xhci: Remove assumption of DWC instance based on DRA7 SoC typeNishanth Menon
Both AM57xx and DRA7xx share the same set of base addresses for DWC controllers. The usage however differ with DWC2 instance used typically in AM57xx evms while DWC1 instances used in DRA7x platforms. Use TARGET_SOC config to differentiate so that CONFIG_AM57XX can be dropped. Eventually, this needs to be dt-fied. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-28linux/compat.h: Properly implement ndelay fallbackmario.six@gdsys.cc
Commit c68c62 ("i2c: mvtwsi: Make delay times frequency-dependent") extensively used the ndelay function with a calculated parameter which is dependant on the configured frequency of the I2C bus. If standard speed is employed, the parameter is usually 10000 (10000ns period length for 100kHz frequency). But, since the arm architecture does not implement a proper version of ndelay, the fallback default from include/linux/compat.h is used, which defines every ndelay as udelay(1). This causes problems for slower speeds on arm, since the delay time is now 9us too short for the desired frequency, which leads to random failures of the I2C interface. To remedy this, we implement a proper, parameter-aware ndelay fallback for architectures that don't implement a real ndelay function. Reported-By: Jason Brown <Jason.brown@apcon.com> To: Tom Rini <trini@konsulko.com> To: Heiko Schocher <hs@denx.de> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2016-11-18sf: Adopt flash table INFO macro from LinuxJagan Teki
INFO macro make flash table entries more adjustable like adding new flash_info attributes, update ID length bytes and so on and more over it will sync to Linux way of defining flash_info attributes. - Add JEDEC_ID - Add JEDEC_EXT macro - Add JEDEC_MFR - spi_flash_params => spi_flash_info - params => info Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
2016-10-11list: Add list_last_entry() to find the last entrySimon Glass
We have list_first_entry() but in some cases it is useful to find the last item added to the list. Add a macro for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-09-27drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controllerSriram Dash
Currently the controller by default enables the Receive Detect feature in P3 mode in USB 3.0 PHY. However, USB 3.0 PHY does not reliably support receive detection in P3 mode. Enabling the USB3 controller to configure USB in P2 mode whenever the Receive Detect feature is required. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2016-09-27drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined ↵Sriram Dash
transfers requests This is required for better performance, and performs below tuning: 1. Enable burst length set, and define it as 4/8/16. 2. Set burst request limit to 16 requests. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
2016-09-26Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
trini: Drop local memset() from examples/standalone/mem_to_mem_idma2intr.c Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-26armv8: ls1012a: Convert CONFIG_LS1012A to Kconfig option ARCH_LS1021AYork Sun
Move this config to Kconfig option and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Calvin Johnson <calvin.johnson@nxp.com> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-23errno.h: sync error macros with linux 4.8-rc7Masahiro Yamada
For synchronization, import macros from - include/uapi/asm-generic/errno-base.h - include/uapi/asm-generic/errno.h - include/linux/errno.h of Linux 4.8-rc7. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-23Move ENOTSUPP defines to include/linux/errno.hMasahiro Yamada
Collect a couple of duplicated defines into a single place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-23Move error macros from <asm-generic/errno.h> to <linux/errno.h>Masahiro Yamada
There are no files that include <asm-generic/errno.h> any more. Move error macro defines to include/linux/errno.h and remove include/asm-generic/errno.h. Going forward, please include <linux/errno.h> when you need error macros. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-23treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23Add <linux/errno.h> as a wrapper of <asm-generic/errno.h>Masahiro Yamada
This will be used to consolidate errno.h variants. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-23treewide: use #include <...> to include public headersMasahiro Yamada
We are supposed to use #include <...> to include headers in the public include paths. We should use #include "..." only for headers in local directories. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-22usb: xhci-rockchip: add rockchip dwc3 controller driverMengDongyang
This patch add support for rockchip dwc3 controller, which corresponding to the two type-C port on rk3399 evb. Only support usb2.0 currently for we have not enable the usb3.0 phy driver and PD(fusb302) driver. Signed-off-by: MengDongyang <daniel.meng@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-15xtensa: add support for the xtensa processor architecture [1/2]Chris Zankel
The Xtensa processor architecture is a configurable, extensible, and synthesizable 32-bit RISC processor core provided by Cadence. This is the first part of the basic architecture port with changes to common files. The 'arch/xtensa' directory, and boards and additional drivers will be in separate commits. Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-26Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2016-07-26include: usb: Rename USB controller base address mappingRajesh Bhagat
Remove Soc specific defines and use generic chasis specific defines for USB controller base address mapping. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-24mtd: fix compiler warningsSteve Rae
- add missing declaration - update debug output format specifiers Signed-off-by: Steve Rae <steve.rae@raedomain.com>
2016-07-24mtd: nand: Increase the max OOB sizeBoris Brezillon
Some NANDs are now exposing 1664 OOB bytes per page. Adjust the NAND_MAX_OOBSIZE value accordingly. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-07-24mtd: nand: add common DT init codeBrian Norris
These are already-documented common bindings for NAND chips. Let's handle them in nand_base. If NAND controller drivers need to act on this data before bringing up the NAND chip (e.g., fill out ECC callback functions, change HW modes, etc.), then they can do so between calling nand_scan_ident() and nand_scan_tail(). The original commit has been slightly reworked to use the fdtdec_xxx() helpers (instead of the of_xxxx() ones). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2016-07-22armv7: armv7: introduce set_gpmc_cs0Ladislav Michl
Allow boards to runtime detect flash type. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2016-07-22armv7: make gpmc_cfg constLadislav Michl
Signed-off-by: Ladislav Michl <ladis@linux-mips.org> [trini: Adapt am33xx, duovero, omap_zoom1] Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-07-14linux/io.h: add generic ioremap()/iounmap() definesMasahiro Yamada
For most of architectures in U-Boot, virtual address is straight mapped to physical address. So, it makes sense to have generic defines of ioremap and friends in <linux/io.h>. All of them are just empty and will disappear at compile time, but they will be helpful to implement drivers which are counterparts of Linux ones. I notice MIPS already has its own implementation, so I added a Kconfig symbol CONFIG_HAVE_ARCH_IOREMAP which MIPS (and maybe Sandbox as well) can select. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-07-14types.h: move and redefine resource_size_tMasahiro Yamada
Currently, this is only defined in arch/arm/include/asm/types.h, so move it to include/linux/types.h to make it available for all architectures. I defined it with phys_addr_t as Linux does. I needed to surround the define with #ifdef __KERNEL__ ... #endif to avoid build errors in tools building. (Host tools should not include <linux/types.h> in the first place, but this is already messy in U-Boot...) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-12linux/compat.h: add dev_warn()Andreas Bießmann
In order to prevent build errors for copied code from linux introduce dev_warn(). Suggested-by: Scott Wood <oss@buserror.net> Signed-off-by: Andreas Bießmann <andreas@biessmann.org> Acked-by: Simon Glass <sjg@chromium.org>
2016-06-06Remove unneeded remnants of bcopy().Robert P. J. Day
Since bcopy() is no longer used, delete all remaining references to it. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2016-06-04Merge git://git.denx.de/u-boot-nand-flashTom Rini
generated by cgit (git 2.34.1) at 2024-12-28 11:38:59 +0000