summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2017-12-04mtd: nand: include <asm/cache.h> from include/linux/mtd/rawnand.hMasahiro Yamada
This is needed for ARCH_DMA_MINALIGN. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04mtd: nand: Rename nand.h into rawnand.hMasahiro Yamada
This header was renamed to rawnand.h in Linux. The following is the corresponding commit in Linux. commit d4092d76a4a4e57b65910899948a83cc8646c5a5 Author: Boris Brezillon <boris.brezillon@free-electrons.com> Date: Fri Aug 4 17:29:10 2017 +0200 mtd: nand: Rename nand.h into rawnand.h We are planning to share more code between different NAND based devices (SPI NAND, OneNAND and raw NANDs), but before doing that we need to move the existing include/linux/mtd/nand.h file into include/linux/mtd/rawnand.h so we can later create a nand.h header containing all common structure and function prototypes. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29mtd: nand: introduce NAND_ROW_ADDR_3 flagMasahiro Yamada
Several drivers check ->chipsize to see if the third row address cycle is needed. Instead of embedding magic sizes such as 32MB, 128MB in drivers, introduce a new flag NAND_ROW_ADDR_3 for clean-up. Since nand_scan_ident() knows well about the device, it can handle this properly. The flag is set if the row address bit width is greater than 16. Delete comments such as "One more address cycle for ..." because intention is now clear enough from the code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Linux commit: 14157f861437ebe2d624b0a845b91bbdf8ca9a2d]
2017-11-29mtd: nand: add a shorthand to generate nand_ecc_caps structureMasahiro Yamada
struct nand_ecc_caps was designed as flexible as possible to support multiple stepsizes (like sunxi_nand.c). So, we need to write multiple arrays even for the simplest case. I guess many controllers support a single stepsize, so here is a shorthand macro for the case. It allows to describe like ... NAND_ECC_CAPS_SINGLE(denali_pci_ecc_caps, denali_calc_ecc_bytes, 512, 8, 15); ... instead of static const int denali_pci_ecc_strengths[] = {8, 15}; static const struct nand_ecc_step_info denali_pci_ecc_stepinfo = { .stepsize = 512, .strengths = denali_pci_ecc_strengths, .nstrengths = ARRAY_SIZE(denali_pci_ecc_strengths), }; static const struct nand_ecc_caps denali_pci_ecc_caps = { .stepinfos = &denali_pci_ecc_stepinfo, .nstepinfos = 1, .calc_ecc_bytes = denali_calc_ecc_bytes, }; Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Linux commit: a03c60178c181767ecfb26fb311a88742d228118]
2017-11-29mtd: nand: add generic helpers to check, match, maximize ECC settingsMasahiro Yamada
Driver are responsible for setting up ECC parameters correctly. Those include: - Check if ECC parameters specified (usually by DT) are valid - Meet the chip's ECC requirement - Maximize ECC strength if NAND_ECC_MAXIMIZE flag is set The logic can be generalized by factoring out common code. This commit adds 3 helpers to the NAND framework: nand_check_ecc_caps - Check if preset step_size and strength are valid nand_match_ecc_req - Match the chip's requirement nand_maximize_ecc - Maximize the ECC strength To use the helpers above, a driver needs to provide: - Data array of supported ECC step size and strength - A hook that calculates ECC bytes from the combination of step_size and strength. By using those helpers, code duplication among drivers will be reduced. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Linux commit: 2c8f8afa7f92acb07641bf95b940d384ed1d0294]
2017-11-29mtd: nand: Pass the CS line to ->setup_data_interface()Boris Brezillon
Some NAND controllers can assign different NAND timings to different CS lines. Pass the CS line information to ->setup_data_interface() so that the NAND controller driver knows which CS line is concerned by the setup_data_interface() request. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Linux commit: 104e442a67cfba4d0cc982384761befb917fb6a1] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29mtd: nand: allow drivers to request minimum alignment for passed bufferMasahiro Yamada
In some cases, nand_do_{read,write}_ops is passed with unaligned ops->datbuf. Drivers using DMA will be unhappy about unaligned buffer. The new struct member, buf_align, represents the minimum alignment the driver require for the buffer. If the buffer passed from the upper MTD layer does not have enough alignment, nand_do_*_ops will use bufpoi. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Linux commit: 477544c62a84d3bacd9f90ba75ffc16c04d78071]
2017-11-29mtd: nand: Drop the ->errstat() hookBoris Brezillon
The ->errstat() hook is no longer implemented NAND controller drivers. Get rid of it before someone starts abusing it. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Linux commit: 7d135bcced20be2b50128432c5426a7278ec4f6d] [masahiro: modify davinci_nand.c for U-Boot] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29mtd: nand: Drop unused cached programming supportBoris Brezillon
Cached programming is always skipped, so drop the associated code until we decide to really support it. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Linux commit: 0b4773fd1649e0d418275557723a7ef54f769dc9] [masahiro: modify davinci_nand.c for U-Boot] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29mtd: add mtd_ooblayout_xxx() helper functionsBoris Brezillon
In order to make the ecclayout definition completely dynamic we need to rework the way the OOB layout are defined and iterated. Create a few mtd_ooblayout_xxx() helpers to ease OOB bytes manipulation and hide ecclayout internals to their users. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Linux commit: 75eb2cec251fda33c9bb716ecc372819abb9278a] [masahiro: cherry-pick more code from adbbc3bc827eb1f43a932d783f09ba55c8ec8379] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29mtd: nand: Support controllers with custom pageMarc Gonzalez
If your controller already sends the required NAND commands when reading or writing a page, then the framework is not supposed to send READ0 and SEQIN/PAGEPROG respectively. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Linux commit: 3371d663bb4579f1b2003a92162edd6d90edd089] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29mtd: nand: Add a few more timings to nand_sdr_timingsBoris Brezillon
Add the tR_max, tBERS_max, tPROG_max and tCCS_min timings to the nand_sdr_timings struct. Assign default/safe values for the statically defined timings, and extract them from the ONFI parameter table if the NAND is ONFI compliant. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> [Linux commit: 204e7ecd47e26cc12d9e8e8a7e7a2eeb9573f0ba Fixup commit: 6d29231000bbe0fb9e4893a9c68151ffdd3b5469] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29mtd: nand: Fix data interface configuration logicBoris Brezillon
When changing from one data interface setting to another, one has to ensure a specific sequence which is described in the ONFI spec. One of these constraints is that the CE line has go high after a reset before a command can be sent with the new data interface setting, which is not guaranteed by the current implementation. Rework the nand_reset() function and all the call sites to make sure the CE line is asserted and released when required. Also make sure to actually apply the new data interface setting on the first die. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: d8e725dd8311 ("mtd: nand: automate NAND timings selection") Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> [Linux commit: 73f907fd5fa56b0066d199bdd7126bbd04f6cd7b] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29mtd: nand: automate NAND timings selectionBoris Brezillon
The NAND framework provides several helpers to query timing modes supported by a NAND chip, but this implies that all NAND controller drivers have to implement the same timings selection dance. Also currently NAND devices can be resetted at arbitrary places which also resets the timing for ONFI chips to timing mode 0. Provide a common logic to select the best timings based on ONFI or ->onfi_timing_mode_default information. Hook this into nand_reset() to make sure the new timing is applied each time during a reset. NAND controller willing to support timings adjustment should just implement the ->setup_data_interface() method. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [Linux commit: d8e725dd831186a3595036b2b1df9f68cbc6efa3] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29mtd: nand: Expose data interface for ONFI mode 0Sascha Hauer
The nand layer will need ONFI mode 0 to use it as timing mode before and right after reset. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Linux commit: 6e1f9708dbf3c50a8da93c1952a01a7a2acb5e66] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29mtd: nand: convert ONFI mode into data interfaceSascha Hauer
struct nand_data_interface is the designated type to pass to the NAND drivers to configure the timing. To simplify further patches convert the onfi_sdr_timings array from type struct nand_sdr_timings nand_data_interface. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Linux commit: b1dd3ca203fccd111926c3f6ac59bf903ec62b05] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29mtd: nand: Introduce nand_data_interfaceSascha Hauer
Currently we have no data structure to fully describe a NAND timing. We only have struct nand_sdr_timings for NAND timings in SDR mode, but nothing for DDR mode and also no container to store both types of timing. This patch adds struct nand_data_interface which stores the timing type and a union of different timings. This can be used to pass to drivers in order to configure the timing. Add kerneldoc for struct nand_sdr_timings while touching it anyway. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Linux commit: eee64b700e26b9bcc6fce024681c31f5e12271fc] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29mtd: nand: Create a NAND reset functionSascha Hauer
When NAND devices are resetted some initialization may have to be done, like for example they have to be configured for the timing mode that shall be used. To get a common place where this initialization can be implemented create a nand_reset() function. This currently only issues a NAND_CMD_RESET to the NAND device. The places issuing this command manually are replaced with a call to nand_reset(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Linux commit: 2f94abfe35b210e7711af9202a3dcfc9e779219a] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29mtd: nand: remove unnecessary 'extern' from function declarationsSascha Hauer
'extern' is not necessary for function declarations. To prevent people from adding the keyword to new declarations remove the existing ones. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Linux commit: 79022591839f110f465cac0223e117b91d47d5db] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29mtd: nand: Add an option to maximize the ECC strengthBoris Brezillon
The generic NAND DT bindings allows one to tweak the ECC strength and step size to their need. It can be used to lower the ECC strength to match a bootloader/firmware config, but might also be used to get a better reliability. In the latter case, the user might want to use the maximum ECC strength without having to explicitly calculate the exact value (this value not only depends on the OOB size, but also on the NAND controller, and can be tricky to extract). Add a generic 'nand-ecc-maximize' DT property and the associated NAND_ECC_MAXIMIZE flag, to let ECC controller drivers select the best ECC strength and step-size on their own. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> [Linux commit: ba78ee00e1ff84de9b3ad33edbd3ec599099ee82] [masahiro: of_property_read_bool -> fdt_getprop for U-Boot] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29mtd: nand: add onfi_* stubs in case ONFI_DETECTION is disabledMasahiro Yamada
Add stubs to the header in case CONFIG_SYS_NAND_ONFI_DETECTION is disabled. This is much easier than adding around #ifdef to the caller side. Also, I removed the #ifdef around onfi_params. In Linux, onfi_params and jedec_params are unified as union. It will be the right thing to do. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29bitops: collect BIT macros to include/linux/bitops.hMasahiro Yamada
Same macros are defined in various places. Collect them into include/linux/bitops.h like Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-17lib: libfdt: wrap scripts/dtc/libfdt/* where possibleMasahiro Yamada
lib/libfdt/ and scripts/dtc/libfdt have the same copies for the followings 6 files: fdt.c fdt_addresses.c fdt_empty_tree.c fdt_overlay.c fdt_strerr.c fdt_sw.c Make them a wrapper of scripts/dtc/libfdt/*. This is exactly what Linux does to sync libfdt. In order to make is possible, import <linux/libfdt.h> and <linux/libfdt_env.h> from Linux 4.14-rc5. Unfortunately, U-Boot locally modified the following 3 files: fdt_ro.c fdt_wip.c fdt_rw.c The fdt_region.c is U-Boot own file. I did not touch them in order to avoid unpredictable impact. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-17linux/types.h: add typedef of uintptr_tMasahiro Yamada
Add this typedef in the same place as in Linux. This is necessary to refactor libfdt inclusion. U-Boot also defines it in include/compiler.h. Of course it should not do that, but I do not want to open a can of worms. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-27Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-10-27armv8: ls1088ardb: Enable USB command RDB qspi-bootRan Wang
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-23mtd: remove MTDDEBUG() and CONFIG_MTD_DEBUGMasahiro Yamada
All users of this macro have been converted. Remove MTDDEBUG and related CONFIG options. ubifs_dbg_msg_key() is kept. It is silent unless DEBUG is defined. I am not touching scripts/config_whitelist.txt. The deprecated options will be dropped by the next resync. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-16linux/time.h: Remove dead codeMarek Behún
Since rem = ((long) *tim_p) % SECSPERDAY; the second while cycle while (rem >= SECSPERDAY) is dead. Reported-by: Coverity (CID: 167334) Signed-off-by: Marek Behun <marek.behun@nic.cz>
2017-10-05lzo: add a function to check the validity of the headerJean-Jacques Hiblot
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-05linux/kernel.h: import DIV_ROUND_{DOWN, UP}_ULL from LinuxMasahiro Yamada
These macros are useful to avoid link error on 32-bit systems. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-04linux/bitfield.h: import <linux/bitfield.h> from Linux 4.13Masahiro Yamada
Copied from Linux 4.13. Commit log of 3e9b3112ec74 of Linux explains well why this header is useful. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-04dm: define dev_*() log functions in DM headerMasahiro Yamada
Many drivers had started to use dev_err, dev_info, etc. for log functions. Currently, we are relying on <linux/compat.h>, but I guess the best home is <dm/device.h>, taking into account that Linux defines them in <linux/device.h>. For now, I am leaving the ones in <linux/compat.h> because lots of Linux-originated code uses dev_*(), but the first argument is not struct udevice, so we need to ignore the bogus argument. More efforts are needed to iron out the issues. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-04bug.h: move runtime BUG/WARN macros into <linux/bug.h>Masahiro Yamada
Collect runtime BUG/WARN into a self-contained header <linux/bug.h> to make these macros easier to use. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-04bug.h: sync BUILD_BUG stuff with Linux 4.13Masahiro Yamada
As commit 84b8bf6d5d2a ("bug.h: move BUILD_BUG_* defines to include/linux/bug.h") noted, include/linux/bug.h was locally modified for U-Boot because the name conflict of error() caused build errors at that time. Now error() is gone, so we can fully sync BUILD_BUG* with Linux. These macros are just compile-time utilities. Nothing depends on platform code, so it should make sense to simply copy Linux's ones. Please note Linux split BUILD_BUG stuff out into <linux/build_bug.h> by commit bc6245e5efd7. Let's follow it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-04printk: collect printk stuff into <linux/printk.h> with loglevel supportMasahiro Yamada
When we import code from Linux, with regular re-sync planned, we want to use printk() and pr_*(). U-Boot does not support them in a clean way. So, people end up with local macros, or compat headers here and there, then we occasionally see build errors of definition conflicts. We have include/linux/compat.h, but putting all sorts of unrelated things into a single header is just a temporal workaround. Hence this patch, to find the best home for all printk variants. If you want to use printk() and friends, please include <linux/printk.h>. This header is self-contained, and pulls in only a few headers. When I was testing this clean-up, I noticed the image size exceeded its platform limit on some boards. This is because all pr_*() that were previously defined as no-op in include/linux/mtd/mtd.h (unless CONFIG_MTD_DEBUG is set), are now enabled. To make such boards happy, this commit also implements CONFIG_LOGLEVEL. The concept is similar to the kernel parameter "loglevel". (Actually, the Kconfig help message was taken from kernel-paremeter.txt of Linux) Messages with a loglevel smaller than console loglevel will be printed. The difference is the loglevel is build-time determined. To save the image size, lower priority pr_*() are compiled out. I set the default of CONFIG_LOGLEVEL to 6, i.e. pr_notice and higher priority messages are compiled in. I adjusted CONFIG_LOGLEVEL to avoid build error for some boards. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Add in SPL_LOGLEVEL that is the same as LOGLEVEL] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-01usb: xhci: Honor endpoint's intervalBin Meng
USB endpoint reports the period between consecutive requests to send or receive data as bInverval in its endpoint descriptor. So far this is ignored by xHCI driver and the 'Interval' field in xHC's endpoint context is always programmed to zero which means 1ms for low speed or full speed , or 125us for high speed or super speed. We should honor the interval by getting it from endpoint descriptor. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-09-12linux/io.h: import generic ioread* / iowrite* accessors from LinuxMasahiro Yamada
Some drivers in Linux (ex. drivers/mtd/nand/denali.c) use ioread*/iowrite* accessors. Import them to make drivers more synced. I copied code from include/asm-generic/io.h of Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-12dma: import linux/dma-direction.h to consolidate enum dma_data_directionMasahiro Yamada
Import include/linux/dma-direction.h from Linux 4.13-rc7 and delete duplicated definitions of enum dma_data_direction. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-14net: Add mii_resolve_flowctrl_fdx()Yuiko Oshino
Add an mii helper function to resolve flow control status per IEEE 802.3-2005 table 28B-3. This function was taken from the Linux source tree. Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-13spl: dm: use CONFIG_IS_ENABLED to test for the DM optionPhilipp Tomsich
Even though there's now a TPL_DM configuration option, the spl logic still checks for SPL_DM and thus does not pick up the proper config option. This introduces the use of CONFIG_IS_ENABLED(DM) in spl.c to always pick up the desired configuration option instead of having a hard-coded check for the SPL variant. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-06avr32: Retire AVR32 for goodAndy Shevchenko
AVR32 is gone. It's already more than two years for no support in Buildroot, even longer there is no support in GCC (last version is heavily patched 4.2.4). Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully). There is no good point to keep this support in U-Boot either. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-06-16treewide: remove unneeded semicolonsMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-01string: Add strcspn()Simon Glass
Add an implementation of strcspn() which returns the number of initial characters that do not match any in a rejection list. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01string: Add strchrnul()Simon Glass
This functions works like strchr() but returns the end of the string if the character is not found. Add an implementation of this. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01Update WARN_ON() to return a valueSimon Glass
In linux v4.9 this returns a value. This saves checking the warning condition twice in some code. Update the U-Boot version to do this also. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-08arm: usb: dra7xx: xHCI registers based on USB port indexUri Mashiach
Modify the determination of the base address of xHCI registers of DRA7XX targets. Before the commit: by the target. After the commit: by the USB port index. Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Marek Vasut <marex@denx.de> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2017-04-27ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate KconfigMasahiro Yamada
In Linux, CONFIG_ARCH_OMAP2PLUS is used for OMAP2 or later SoCs. Rename CONFIG_ARCH_OMAP2 to CONFIG_ARCH_OMAP2PLUS to follow this naming. Move the OMAP2+ board/SoC choice down to mach-omap2/Kconfig to slim down the arch/arm/Kconfig level. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-04-18Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-04-18sysreset: psci: support system reset in a generic way with PSCIMasahiro Yamada
If the system is running PSCI firmware, the System Reset function (func ID: 0x80000009) is supposed to be handled by PSCI, that is, the SoC/board specific reset implementation should be moved to PSCI. U-Boot should call the PSCI service according to the arm-smccc manner. The arm-smccc is supported on ARMv7 or later. Especially, ARMv8 generation SoCs are likely to run ARM Trusted Firmware BL31. In this case, U-Boot is a non-secure world boot loader, so it should not be able to reset the system directly. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-04-18ARM: adjust arm-smccc code for use in U-BootMasahiro Yamada
Adjust ARM SMC Calling Convention code for U-Boot: - Replace the license block with SPDX - Change path to asm-offsets.h - Define UNWIND() as no-op - Add Kconfig entry - Add asm-offsets Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
generated by cgit (git 2.34.1) at 2024-12-26 07:33:40 +0000