summaryrefslogtreecommitdiff
path: root/include/spl.h
AgeCommit message (Collapse)Author
2016-12-09spl: Add a name to the SPL load-image methodsSimon Glass
It is useful to name each method so that we can print out this name when using the method. Currently this happens using a separate function. In preparation for unifying this, add a name to each method. The name is only available if we have libcommon support (i.e can use printf()). Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-09spl: Use a single underscore in the SPL_LOAD_IMAGE_METHOD() macroSimon Glass
A double underscore is normally reserved for compiler predefines. Use a single underscore instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-01SPL: mmc: Make spl_mmc_load_image availableMarek Vasut
Make the spl_mmc_load_image() available globally, so it can be invoked directly by SPL on extremely space-constrained systems. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jaehoon Chung <jh80.chung@samsung.com>
2016-10-06spl: Make spl_boot_list a local variableSimon Glass
There is no need for this to be in the BSS region. By moving it we can delay use of BSS in SPL. This is useful for machines where the BSS region is not in writeable space. On 64-bit x86, SPL runs from SPI flash and it is easier to eliminate BSS use than link SPL to run with BSS at a particular cache-as-RAM (CAR) address. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Update spl_load_simple_fit() to take an spl_image paramSimon Glass
Upda the SPL FIT code to use the spl_image parameter. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Update fat functions to take an spl_image parameterSimon Glass
Update the fat loader to avoid using the spl_image global variable. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Update ext functions to take an spl_image parameterSimon Glass
Update the ext loader to avoid using the spl_image global variable. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Pass spl_image as a parameter to load_image() methodsSimon Glass
Rather than having a global variable, pass the spl_image as a parameter. This avoids BSS use, and makes it clearer what the function is actually doing. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Convert spl_board_load_image() to use linker listSimon Glass
Add a linker list declaration for this method and remove the explicit switch() code. Update existing users. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Convert spl_net_load_image() to use linker listSimon Glass
Add a linker list declaration for this method and remove the explicit switch() code. We need two variants - one for BOOT_DEVICE_CPGMAC and one for BOOT_DEVICE_USBETH. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Convert spl_spi_load_image() to use linker listSimon Glass
Add a linker list declaration for this method and remove the explicit switch() code. Also set up the sunxi function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Convert spl_sata_load_image() to use linker listSimon Glass
Add a linker list declaration for this method and remove the explicit switch() code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Convert spl_usb_load_image() to use linker listSimon Glass
Add a linker list declaration for this method and remove the explicit switch() code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Convert spl_ymodem_load_image() to use linker listSimon Glass
Add a linker list declaration for this method and remove the explicit switch() code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Convert spl_nor_load_image() to use linker listSimon Glass
Add a linker list declaration for this method and remove the explicit switch() code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Convert spl_onenand_load_image() to use linker listSimon Glass
Add a linker list declaration for this method and remove the explicit switch() code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Convert spl_nand_load_image() to use linker listSimon Glass
Add a linker list declaration for this method and remove the explicit switch() code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Convert spl_ubi_load_image() to use linker listSimon Glass
Add a linker list declaration for this method and remove the explicit switch() code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Convert spl_mmc_load_image() to use linker listSimon Glass
Add a linker list declaration for this method and remove the explicit switch() code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Add a way to declare an SPL image loaderSimon Glass
Add a linker list macro which can be used to declare an SPL image loader. Update spl_load_image() to search available loaders for the correct one. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Convert boot_device into a structSimon Glass
At present some spl_xxx_load_image() functions take a parameter and some don't. Of those that do, most take an integer but one takes a string. Convert this parameter into a struct so that we can pass all functions the same thing. This will allow us to use a common function signature. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Kconfig: Move SPL_DISPLAY_PRINT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Also add a function comment to the header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Add function comments to spl_start_uboot()Simon Glass
Add some comments to describe this function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Add a parameter to jump_to_image_linux()Simon Glass
Instead of using the global spl_image variable, pass the required struct in as an argument. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Add a parameter to spl_parse_image_header()Simon Glass
Instead of using the global spl_image variable, pass the required struct in as an argument. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Add a parameter to spl_set_header_raw_uboot()Simon Glass
Rather than act on the global variable, pass the required struct in as a parameter. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Move spl_board_load_image() into a generic headerSimon Glass
At present this is only used on ARM and sandbox, but it is just as applicable to other architectures. Move the function prototype into the generic SPL header. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-27spl: dfu: adding dfu support functions for SPL-DFUB, Ravi
Adding support functions to run dfu spl commands. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-22spl: support loading from UBI volumesLadislav Michl
Add support for loading from UBI volumes on the top of NAND and OneNAND. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2016-06-26common: Pass the boot device into spl_boot_mode()Marek Vasut
The SPL code already knows which boot device it calls the spl_boot_mode() on, so pass that information into the function. This allows the code of spl_boot_mode() avoid invoking spl_boot_device() again, but it also lets board_boot_order() correctly alter the behavior of the boot process. The later one is important, since in certain cases, it is desired that spl_boot_device() return value be overriden using board_boot_order(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [add newly introduced zynq variant] Signed-aff-by: Andreas Bießmann <andreas@biessmann.org>
2016-05-27spl: Allow to load a FIT containing U-Boot from FSLokesh Vutla
This provides a way to load a FIT containing U-Boot and a selection of device tree files from a File system. Making sure that all the reads and writes are aligned to their respective needs. Tested-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Make this still apply with Michal's alignment change for 'fit'] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-24spl: Introduce new function spl_board_prepare_for_bootMichal Simek
Call this function before passing control from SPL. For fpga case it is necessary to enable for example level shifters when bitstream is programmed. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-17SPL: Let spl_parse_image_header() return valueMarek Vasut
Allow the spl_parse_image_header() to return value. This is convenient for controlling the SPL boot flow if the loaded image is corrupted. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@konsulko.com>
2016-03-14Merge git://git.denx.de/u-boot-dmTom Rini
2016-03-14spl: Add an option to load a FIT containing U-BootSimon Glass
This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-14dm: Drop the block_dev_desc_t typedefSimon Glass
Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long and causes 80-column violations, rename it to struct blk_desc. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2015-11-18spl: mmc: add support for BOOT_DEVICE_MMC2Nikita Kiryanov
Currently the mmc device that SPL looks at is always mmc0, regardless of the BOOT_DEVICE_MMCx value. This forces some boards to implement hacks in order to boot from other mmc devices. Make SPL take into account the correct mmc device. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-18spl: change return values of spl_*_load_image()Nikita Kiryanov
Make spl_*_load_image() functions return a value instead of hanging if a problem is encountered. This enables main spl code to make the decision whether to hang or not, thus preparing it to support alternative boot devices. Some boot devices (namely nand and spi) do not hang on error. Instead, they return normally and SPL proceeds to boot the contents of the load address. This is considered a bug and is rectified by hanging on error for these devices as well. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans De Goede <hdegoede@redhat.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Jagan Teki <jteki@openedev.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-07-21dm: spl: Allow device tree/driver model in board_init_f()Simon Glass
Add an spl_init() function that does basic init such that board_init_f() can use simple malloc(), device tree and driver model. Each one is set up only if enabled for SPL. Note: We really should refactor SPL such that there is a single board_init_f() and rename the existing weak board_init_f() functions provided by boards, calling them from the single board_init_f(). Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-10arm: spl: Add an API to detect when U-Boot is started from SPLSimon Glass
For secure boot systems it is common to have a read-only U-Boot which starts the machine and jumps to a read-write U-Boot for actual booting the OS. This allows the read-write U-Boot to be upgraded without risk of permanently bricking the machine. In the event that the read-write U-Boot is corrupted, the read-only U-Boot can detect this with a checksum and boot into a recovery flow. To support this, add a way to detect when U-Boot is run from SPL as opposed to some other method, such as booted directly (no SPL) or started from another source (e.g. a primary U-Boot). This works by putting a special value in r0. For now we rely on board-specific code to actually check the register and set a flag. At some point this could be generalised, perhaps by using a spare register and passing a flag to _main and/or board_init_f(). This commit does not implement any feature, but merely provides the API for boards to implement. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-17spl, nand: add option to boot raw u-boot.bin image onlyHeiko Schocher
enable to boot only a raw u-boot.bin image from nand with the CONFIG_SPL_NAND_RAW_ONLY define. This option saves space on boards where spl space is low. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-10-27spl: Add EXT support to SPLGuillaume GARDET
Add EXT filesystem support to SPL. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> [trini: Fix a warning and checkpatch problems] Signed-off-by: Tom Rini <trini@ti.com>
2014-10-27Rename some defines containing FAT in their name to be filesystem genericGuillaume GARDET
Rename some defines containing FAT in their name to be filesystem generic: MMCSD_MODE_FAT => MMCSD_MODE_FS CONFIG_SPL_FAT_LOAD_ARGS_NAME => CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME => CONFIG_SPL_FS_LOAD_PAYLOAD_NAME CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION => CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
2014-10-25spl: add prototype for jump_to_image_no_argsJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-02-19common: spl: Add spl sata boot supportDan Murphy
Add spl_sata to read a fat partition from a bootable SATA drive. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com>
2014-02-07SPL: Add CONFIG_SUPPORT_EMMC_BOOT support to CONFIG_SPL_FRAMEWORKTom Rini
We use the switch CONFIG_SUPPORT_EMMC_BOOT today to enable some additional features of the eMMC boot partitions. Add support for being told that we have booted from one of these partitions to the spl framework and implement this on TI OMAP/related. Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-01-24spl: common: Support for USB MSD FAT image loadingDan Murphy
Add SPL support to be able to detect a USB Mass Storage device connected to a USB host. Once a USB Mass storage device is detected the SPL will load the u-boot.img from a FAT partition to target address. Signed-off-by: Dan Murphy <dmurphy@ti.com>
2014-01-24spl: common: Move FAT funcs to a common fileDan Murphy
Move the FAT functions to a common location for reuse. Signed-off-by: Dan Murphy <dmurphy@ti.com>
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
2013-05-10ARM: OMAP: Cleanup boot parameters usageSRICHARAN R
The boot parameters are read from individual variables assigned for each of them. This been corrected and now they are stored as a part of the global data 'gd' structure. So read them from 'gd' instead. Signed-off-by: Sricharan R <r.sricharan@ti.com> [trini: Add igep0033 hunk] Signed-off-by: Tom Rini <trini@ti.com>
generated by cgit (git 2.34.1) at 2024-12-28 18:18:11 +0000