summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2016-11-21image: Add crypto_algo struct for RSA infoAndrew Duda
Cut down on the repetition of algorithm information by defining separate checksum and crypto structs. image_sig_algos are now simply pairs of unique checksum and crypto algos. Signed-off-by: Andrew Duda <aduda@meraki.com> Signed-off-by: aduda <aduda@meraki.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-21rsa: Verify RSA padding programaticallyAndrew Duda
Padding verification was done against static SHA/RSA pair arrays which take up a lot of static memory, are mostly 0xff, and cannot be reused for additional SHA/RSA pairings. The padding can be easily computed according to PKCS#1v2.1 as: EM = 0x00 || 0x01 || PS || 0x00 || T where PS is (emLen - tLen - 3) octets of 0xff and T is DER encoding of the hash. Store DER prefix in checksum_algo and create rsa_verify_padding function to handle verification of a message for any SHA/RSA pairing. Signed-off-by: Andrew Duda <aduda@meraki.com> Signed-off-by: aduda <aduda@meraki.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-21rsa: cosmetic: rename pad_len to key_lenAndrew Duda
checksum_algo's pad_len field isn't actually used to store the length of the padding but the total length of the RSA key (msg_len + pad_len) Signed-off-by: Andrew Duda <aduda@meraki.com> Signed-off-by: aduda <aduda@meraki.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-21TI: Remove CONFIG_OMAP_COMMON in favor of CONFIG_ARCH_OMAP2Tom Rini
With the move to arch/arm/mach-omap2 there are now very few uses of CONFIG_OMAP_COMMON and further they can all be replaced with CONFIG_ARCH_OMAP2, so do so. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-21arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platformsTom Rini
This moves what was in arch/arm/cpu/armv7/omap-common in to arch/arm/mach-omap2 and moves arch/arm/cpu/armv7/{am33xx,omap3,omap4,omap5} in to arch/arm/mach-omap2 as subdirectories. All refernces to the former locations are updated to the current locations. For the logic to decide what our outputs are, consolidate the tests into a single config.mk rather than including 4. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-21ext4: Allow reading files with non-zero offset, clamp read lenStefan Brüns
Support was already implemented, but not hooked up. This fixes several fails in the test cases. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-11-21arm: dra7xx: Unify Android partition tableSemen Protsenko
Make Android partition table the same as for AM57x EVM. 1. Make "bootloader" partition start from 0x300 sectors offset, so DRA7 is bootable in Android mode (see CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR option). 2. Increase "bootloader" partition size, because size of u-boot.img is about 632 KiB (when building DT defconfig, with FIT image enabled). 3. Specify "reserved" partition explicitly, rather than specifying "efs" partition start. Reserved area will be used to store U-Boot environment on eMMC. It's convenient to have it exposed explicitly so we can read/write U-Boot environment. 4. Keep all Android partitions locations intact, by reducing "reserved" partition size. CONFIG_ENV_SIZE is considered. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-11-21arm: am57xx: Enable 8-bit eMMC accessSemen Protsenko
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-11-21arm: am57xx: Define Android partition tableSemen Protsenko
"fastboot oem format" command reuses "gpt write" command, which in turn requires correct partitions defined in $partitions variable. This patch adds such definition of Android partitions for DRA7XX EVM board. By default $partitions variable contains Linux partition table. In order to prepare Android environment one can run next commands from U-Boot shell: => env set partitions $partitions_android => env save After those operations one can go to fastboot mode and perform "fastboot oem format" to create Android partition table. While at it, enable CONFIG_RANDOM_UUID to spare user from providing UUIDs for each partition manually. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-11-21omap3_beagle: use config_distro_bootcmdGuillaume GARDET
Add support for distro_bootcmd on MMC and fall back to prior behavior if distro_bootcmd fails. Tested on Beagleboad xM to boot GRUB2 (and then Linux kernel) in EFI mode from MMC. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-21ti_omap5_common: Respect USB controller number in fastbootSemen Protsenko
On "fastboot reboot-bootloader" we check "dofastboot" variable and do "fastboot 0" command in U-Boot if it's 1. But there are boards which have USB controller number other than 0, so it should be respected when performing "fastboot" command. This patch reuses CONFIG_FASTBOOT_USB_DEV option toprovide correct USB controller number to "fastboot" command. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-18spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORSSemen Protsenko
This option isn't used for anything, so get rid of it. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-11-18spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to KconfigSemen Protsenko
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Fix sniper and kc1 migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-17Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2016-11-17 Highlights this time around: - x86 efi_loader support - hello world efi test case - network device name is now representative - terminal output reports modes correctly - fix psci reset for ls1043/ls1046 - fix efi_add_runtime_mmio definition for x86 - efi_loader support for ls2080
2016-11-17ls2080ardb: Convert to distro bootAlexander Graf
Most new systems in U-Boot these days make use of the generic "distro" framework which allows a user to have U-Boot scan for a bootable OS on all available media types. This patch extends the LS2080ARDB board to use that framework if the hard coded NOR flash location does not contain a bootable image. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-17efi_loader: Fix efi_add_runtime_mmio definitionAlexander Graf
The efi_add_runtime_mmio prototype for disabled CONFIG_EFI_LOADER was different from the enabled one. Sync them. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-15ARM64: zynqmp: Correct the sdhci minimum frequency for ep108Siva Durga Prasad Paladugu
Correct the sdhci minimum frequency for ep platform. It should be right shift instead of left shift operand. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Adjust to new SMC interface to get silicon versionSoren Brinkmann
The new FW interface returns the IDCODE and version register, leaving extracting bitfields to the caller. Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM: zynq: Add support for Zynq 7000S 7007s/7012s/7014s devicesMichal Simek
Zynq 7000S (Single A9 core) devices is using different ID code. This patch adds this new codes and assign them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15zynq: nand: Enable Nand flash controller driver a zynq boardSiva Durga Prasad Paladugu
Enable zynq Nand flash controller driver for a zynq ZC770 XM011(dc2) board. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM: zynq: Add support for the topic-miami system-on-modules and carrier boardsMike Looijmans
The topic-miami SoMs contain a Zynq xc7z015 or xc7z030 SoC, 1GB DDR3L RAM, 32MB QSPI NOR flash and 256MB NAND flash. The topic-miamiplus SoMs contain a Zynq xc7z035, xc7z045 or xc7z100 SoC, 2x 1GB DDR3L RAM, 64MB dual-parallel QSPI flash, clock sources and a fan controller. The "Florida" carrier boards add SD, USB, ethernet and other interfaces. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-14elf: arm: Add a few ARM relocation typesSimon Glass
Rather than hard-coding the relocation type, add it to the ELF header file and use it from there. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14efi: Add support for a hello world test programSimon Glass
It is useful to have a basic sanity check for EFI loader support. Add a 'bootefi hello' command which loads HelloWord.efi and runs it under U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> [agraf: Fix documentation, add unfulfilled kconfig dep] Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14x86: Tidy up selection of building the EFI stubSimon Glass
At present we use a CONFIG option in efi.h to determine whether we are building the EFI stub or not. This means that the same header cannot be used for EFI_LOADER support. The CONFIG option will be enabled for the whole build, even when not building the stub. Use a different define instead, set up just for the files that make up the stub. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14efi: Use device device path type Messaging for network interface nodeOleksandr Tymoshenko
When adding network interface node use Messaging device path with subtype MAC Address and device's MAC address as a value instead of Media Device path type with subtype File Path and path "Net" Signed-off-by: Oleksandr Tymoshenko <gonzo@bluezbox.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-07net: phy: micrel: center FLP burst timing at 16msAsh Charles
Like [1], reset the FLP burst timing for the KSZ9031 to the 16ms specified by the IEEE802.3 standard from the chip's default of 8ms. For more details, see the "Auto-Negotiation Timing" section of the KSZ9031RNX datasheet. [1] https://patchwork.kernel.org/patch/6558371/ Signed-off-by: Ash Charles <ash.charles@savoirfairelinux.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-11-05colibri_pxa270: drop lzma support for space reasonMarcel Ziswiler
As the upcoming driver model integration takes up some more precious flash space first make sure to drop expensive LZMA support. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-11-02Merge git://git.denx.de/u-boot-rockchipTom Rini
2016-10-31Fix spelling of "resetting".Vagrant Cascadian
Cover-Letter: Fixes several spelling errors for the words "resetting", "extended", "occur", and "multiple". Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-31OMAP3: omap3_logic: Add scripts to boot over network.Adam Ford
Not all networks have a DHCP server configured properly, so these scripts make it easier to boot in that scenario. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-31OMAP3: omap3_logic: Remove LCD preboot infoAdam Ford
The LCD isn't supported in U-Boot and the LCD is now configured in the device tree, so this code is pointless. V2: Eliminiate erroneous newline. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-30rockchip: use rockchip linux partitions layoutJacob Chen
Unify the partitions of each chip then it will be more easy for us to write scripts, tools or guides for rockchip chips. Those extra partitions mostly are used to be compatible with our internal loaders (such as miniloader which was same as spl, or android loader then we can support dual boot) Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2016-10-30evb-rk3399: config: set emmc as default boot devKever Yang
rk3399 has two mmc dev controller: mmc 0: SD card; mmc 1: EMMC U-Boot will scan the mmc boot device configured by CONFIG_SYS_MMC_ENV_DEV, since evb has emmc on board, let's set the EMMC as default. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2016-10-30rockchip: RK3288 needs fdt and initrd below 256M nowSandy Patterson
I am not sure why this limit is changing. But my kernel doesn't load when it's above 256. This was testing on the rock2 board. Signed-off-by: Sandy Patterson <apatterson@sightlogix.com> Updated commit subject: Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-30sunxi: A64: enable USB supportAmit Singh Tomar
Mostly by adding MACH_SUN50I to some existing #ifdefs enable support for the the HCI0 USB host controller on the A64. Fix up some minor 64-bit hiccups on the way. Add the bare minimum DT bits to the A64 .dtsi and enable the controllers and the PHY on the Pine64. This is limited to the first USB controller at the moment, which is connected to the lower USB socket on the Pine64 board. [Andre: remove unneeded defines, enable OHCI, add commit message] Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-10-30sunxi: remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT definesMasahiro Yamada
ARCH_SUNXI selects DM_USB, where CONFIG_USB_MAX_CONTROLLER_COUNT is not used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-10-30sunxi: Rename CONFIG_SUNXI to CONFIG_ARCH_SUNXIJagan Teki
CONFIG_SUNXI -> CONFIG_ARCH_SUNXI and removed CONFIG_SUNIX from config_whitelist.txt Cc: Simon Glass <sjg@chromium.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-10-28Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini
2016-10-28board: sama5d2_xplained: Enable an early debug UARTWenyou Yang
Enable an early debug UART to debug problems when an ICE or other debug mechanism is not available. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-10-28board: sama5d2_xplained: Set 'ethaddr' got from AT24MACWenyou Yang
If 'ethaddr' is not set, we will get the ethernet address from AT24MAC, and set it to 'ethaddr' variable. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Songjun Wu <songjun.wu@microchip.com> Reviewed-by: Andreas Bießmann <biessmann@corscience.de>
2016-10-28board: sama5d2_xplained: Move config options to defconfigsWenyou Yang
Move the config options from the include/configs/sama5d2_xplained.h to configs/sama5d2_xplained_*_defconfig. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-10-28AT91: Correct misspelling of "redundent" in partition namesRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-10-28Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: common/Kconfig configs/dms-ba16_defconfig
2016-10-28pci: Move CONFIG_PCI_PNP to KconfigBin Meng
Introduce CONFIG_PCI_PNP in Kconfig and move over boards' defconfig to use that. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Re-generate configs and include/configs/ changes] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-27drivers/pci/Kconfig: Add PCITom Rini
Add 'PCI' as a menu option and migrate all existing users. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2016-10-26imx6: icorem6: Add default mtd nand partition tableJagan Teki
icorem6qdl> mtdparts device nand0 <nand>, # parts = 6 0: spl 0x00200000 0x00000000 0 1: uboot 0x00200000 0x00200000 0 2: env 0x00100000 0x00400000 0 3: kernel 0x00400000 0x00500000 0 4: dtb 0x00100000 0x00900000 0 5: rootfs 0x1f600000 0x00a00000 0 Cc: Stefano Babic <sbabic@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26imx6: icorem6: Enable MTD device supportJagan Teki
Enable MTD device, partition and command support. Cc: Stefano Babic <sbabic@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26imx6: icorem6: Add NAND supportJagan Teki
Add NAND support for Engicam i.CoreM6 qdl board. Boot Log: -------- U-Boot SPL 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43) Trying to boot from NAND NAND : 512 MiB U-Boot 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43 +0530) CPU: Freescale i.MX6SOLO rev1.3 at 792MHz CPU: Industrial temperature grade (-40C to 105C) at 55C Reset cause: WDOG Model: Engicam i.CoreM6 DualLite/Solo Starter Kit DRAM: 256 MiB NAND: 512 MiB MMC: FSL_SDHC: 0 In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 icorem6qdl> Cc: Scott Wood <oss@buserror.net> Cc: Stefano Babic <sbabic@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26engicam: icorem6: Add DM_GPIO, DM_MMC supportJagan Teki
Add DM_GPIO, DM_MMC support for u-boot and disable for SPL. Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26dt-bindings: clock: imx6qdl: Add clock definesJagan Teki
Add imx6qdl clock header defines support from Linux. "clk: imx: Add clock support for imx6qp" (sha1: ee36027427c769b0b9e5e205fe43aced93d6aa66) Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit (git 2.34.1) at 2024-12-26 23:59:44 +0000