summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2010-06-07AM35x: Add support for EMIF4Vaibhav Hiremath
This patch adds support for the EMIF4 interface available in the AM35x processors. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07AM35x: Add support for AM3517EVMVaibhav Hiremath
This patch adds basic support for the AM3517EVM. It includes: - Board files (.c and .h) - Default configuration file - Updates for Makefile Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07omap3: Consolidate SDRC related operationsVaibhav Hiremath
Consolidated SDRC related functions into one file - sdrc.c And also replaced sdrc_init with generic memory init function (mem_init), this generalization of omap memory setup is necessary to support the new emif4 interface introduced in AM3517. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07OMAP3EVM: Added NAND supportVaibhav Hiremath
The EVMS have been shipping with NAND (instead of OneNAND) as default. So, this patch sets NAND as default. To choose OneNAND, define CMD_ONENAND instead of CMD_NAND in the config file omap3_evm.h. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07TI: TNETV107X EVM initial supportCyril Chemparathy
TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a bunch on on-chip integrated peripherals. This patch adds support for the TNETV107X EVM board. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07ARM1176: Coexist with other ARM1176 platformsCyril Chemparathy
The current ARM1176 CPU specific code is too specific to the SMDK6400 architecture. The following changes were necessary prerequisites for the addition of other SoCs based on ARM1176. Existing board's (SMDK6400) configuration has been modified to keep behavior unchanged despite these changes. 1. Peripheral port remap configurability The earlier code had hardcoded remap values specific to s3c64xx in start.S. This change makes the peripheral port remap addresses and sizes configurable. 2. U-Boot code relocation support Most architectures allow u-boot code to run initially at a different address (possibly in NOR) and then get relocated to its final resting place in RAM. Added support for this capability in ARM1176 architecture. 3. Disable TCM if necessary If a ROM based bootloader happened to have initialized TCM, we disable it here to keep things sane. 4. Remove unnecessary SoC specific includes ARM1176 code does not really need this SoC specific include. The presence of this include prevents builds on other ARM1176 archs. 5. Modified virt-to-phys conversion during MMU disable The original MMU disable code masks out too many bits from the load address when it tries to figure out the physical address of the jump target label. Consequently, it ends up branching to the wrong address after disabling the MMU. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-05-28Merge branch 'next' of git://git.denx.de/u-boot-niosWolfgang Denk
2010-05-28nios: remove nios-32 archThomas Chou
The nios-32 arch is obsolete and broken. So it is removed. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-28nios2: add gpio support to nios2-generic boardThomas Chou
This patch adds gpio support of Altera PIO component to the nios2-generic board. Though it drives only gpio_led at the moment, it supports bidirectional port to control bit-banging I2C, NAND flash busy status or button switches, etc. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Tested-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-05-27USB: fix create_pipe()Sergei Shtylyov
create_pipe() can give wrong result if an expression is passed as the 'endpoint' argument -- due to missing parentheses. Thanks to Martin Mueller for finding the bug and providing the patch. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2010-05-21Merge branch 'master' of git://git.denx.de/u-boot-ubiWolfgang Denk
2010-05-21Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk
2010-05-19UBI: Fix problem in UBI/Linux "compatibility layer"Stefan Roese
"down_write_trylock" needs to return 1 instead of 0 for success. Otherwise copying a block with a read error (e.g. bit-flip on read) won't work correctly. Signed-off-by: Stefan Roese <sr@denx.de>
2010-05-19MX31: Added support for the Casio COM57H5M10XRC to QONGStefano Babic
The patch adds setup to connect a CASIO COM57H5M10XRC (640x480 TFT display) to the QONG module. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-05-17Fix SICRL setting in SIMPC8313Ron Madrid
This patch sets the SICRL_LBC bits in SICRL to change the function of the associated pins to GPIO functionality. Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
2010-05-09Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk
2010-05-07mpc83xx/mvBLM7: add usb commands and cleanup.Andre Schwarz
Add USB commands. Rename autoscript to bootscript. Add automatic bootscript image generation to makefile. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-05-07mpc83xx: Add UPMA configuration to SIMPC8313Ron Madrid
Added UPM array table, upmconfig, and Local Bus configuration support for SIMPC8313 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-05-07serial: punt unused serial_addr()Mike Frysinger
Only one file apparently defines this function, and it merely stubs it out. So if no one is defining/calling it, punt it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-07update include/asm/ gitignore after moveMike Frysinger
With the cpu include paths moved, the gitignore paths need updating. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Tested-by: Tom Rix <tom@bumblecow.com>
2010-05-06compiler.h: add uint typedefMike Frysinger
Recent crc changes started using the "uint" type in headers that are used on the build system. This subsequently broke mingw targets as they do not provide such a type. So add this basic typedef to compiler.h so that we do not have to worry about this breaking again in the future. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-0674xx_7xx: CPCI750: Add ECC support on esd CPCI-CPU/750 boardReinhard Arlt
Add ECC support for DDR RAM for MV64360 on esd CPCI-CPU/750 board. This patch also adds the "pldver" command to display the CPLD revision. Signed-off-by: Reinhard Arlt <reinhard.arlt@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
2010-05-06eNET: Implement eNET WatchdogGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06eNET: Use SC520 MMCR to reset eNET boardGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06eNET: Add support for onboard RTL8100B (RTL8139) chipsGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06eNET: Fix CONFIG_SYS_HZ to be 1000Graeme Russ
The clock interupt has always been 1kHz as per timer_init() in /arch/i386/cpu/sc520/sc520_timer.c Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06eNET: Fix Flash WriteGraeme Russ
Onboard AMD Flash chip does not support buffered writes Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06x86: Fix support for booting bzImageGraeme Russ
Add support for newer (up to 2.6.33) kernels Add zboot command which takes the address of a bzImage as its first argument and (optionally) the size of the bzImage as the second argument (the second argument is needed for older kernels which do not include the bzImage size in the header) Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06x86: Use CONFIG_SERIAL_MULTIGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05allow print_size to print large numbers on 32-bit systemsTimur Tabi
Modify print_size() so that it can accept numbers larger than 4GB on 32-bit systems. Add support for display terabyte, petabyte, and exabyte sizes. Change the output to use International Electrotechnical Commission binary prefix standard. Signed-off-by: Timur Tabi <timur@freescale.com>
2010-05-05Add SPI support to mx51evk boardStefano Babic
The patch adds SPI devices to the mx51evk board. The MC13892 chip (PMIC) is supported. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-05-05MX: Added definition file for MC13892Stefano Babic
The MC13892 is a Power Controller used with processors of the family MX.51. The file adds definitions to be used to setup the internal registers via SPI. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-05-05MX31: Add support for PMIC to the QONG moduleStefano Babic
Add support for the PMIC (MC13783) controller and enables charging of the RTC battery. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-05-05MX: RTC13783 uses general function to access PMICStefano Babic
The RTC is part of the Freescale's PMIC controller. Use general function to access to PMIC internal registers. Signed-off-by: Stefano Babic <sbabic@denx.de> Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
2010-05-05MX: Added Freescale Power Management DriverStefano Babic
The patch add supports for the Freescale's Power Management Controller (known as Atlas) used together with i.MX31/51 processors. It was tested with a MC13783 (MX31) and MC13892 (MX51). Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-05-05i.MX31: Activate NAND support for i.MX31 Litekit board.Magnus Lilja
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2010-05-04configs: remove unused CONFIG_COMMAND_HISTORYKim Phillips
$ git grep CONFIG_COMMAND_HISTORY CHANGELOG: CONFIG_COMMAND_HISTORY include/configs/AP1000.h:#define CONFIG_COMMAND_HISTORY 1 include/configs/keymile-common.h:#define CONFIG_COMMAND_HISTORY 1 include/configs/manroland/common.h:#define CONFIG_COMMAND_HISTORY 1 $ Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Heiko Schocher <hs@denx.de>
2010-05-04Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk
2010-05-04Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
2010-05-03Program net device MAC addresses after initializingBen Warren
Add a new function to the eth_device struct for programming a network controller's hardware address. After all network devices have been initialized and the proper MAC address for each has been determined, make a device driver call to program the address into the device. Only device instances with valid unicast addresses will be programmed. Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Prafulla Wadaskar <prafulla@marvell.com> Tested-by: Heiko Schocher <hs@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-03net: add altera triple speeds ethernet mac driverThomas Chou
This driver supports the Altera triple speeds 10/100/1000 ethernet mac. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03net: add opencore 10/100 ethernet mac driverThomas Chou
This patch ports the opencore 10/100 ethernet mac driver ethoc.c from linux kernel to u-boot. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-01Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/masterWolfgang Denk
2010-04-30pm9263 converted to at91 soc accessAsen Dimov
Signed-off-by: Asen Dimov <dimov@ronetix.at>
2010-04-30MX31: Add UBI support to QONG moduleStefano Babic
The UBI/UBIFS support is added to the QONG module. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-04-30MX31: Add support for NAND to QONG boardStefano Babic
The NAND device is connected to the FPGA of the QONG board and not to the NFC controller. For this reason, the FPGA must be set and initialized before accessing to the NAND itself. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-04-30configs/openrd_base.h: reordered macrosFrans Meulenbroeks
moved CONFIG_CMD_FAT to filesystem section swapped CONFIG_CMD_NAND and CONFIG_CMD_MII so they are alpha correct Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
2010-04-30configs/sheevaplug: added a few additional commandsFrans Meulenbroeks
This patch includes a few additional commands in the sheevaplug version of u-boot: - support for LONGHELP so you can get help messages - auto completion and command editing - ubi and mii support - ext2 filesystem (convenient if you have an ext2 from which you want to boot) - jffs2 and ubifs filesystems (if you want to use these in NAND) This also makes it more similar to openrd client. Side effect of this patch is that the code now needs 3 sectors i.s.o. 2 so an existing env is overwritten Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
2010-04-30Marvell GuruPlug Board SupportSiddarth Gore
GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0 GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot References: http://www.globalscaletechnologies.com/t-guruplugdetails.aspx http://plugcomputer.org This patch is for GuruPlug Plus, but it supports Standard version as well. Signed-off-by: Siddarth Gore <gores@marvell.com>
2010-04-30Moved board specific values in config fileStefano Babic
The lowlevel_init file contained some hard-coded values to setup the RAM. These board related values are moved into the board configuration file. Signed-off-by: Stefano Babic <sbabic@denx.de>
generated by cgit (git 2.34.1) at 2025-01-13 02:31:38 +0000