summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2014-10-27arm: socfpga: Zap CONFIG_EPHY[01]_PHY_ADDR macroMarek Vasut
This is not used anywhere, remove it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Pavel Machek <pavel@denx.de>
2014-10-27arm: socfpga: Zap spl.h and ad-hoc related symsMarek Vasut
Switch to the common spl.h file and zap the arch/spl.h . Since the arch/spl.h contained various ad-hoc symbols, zap those symbols as well and rework the board configuration a little so it doesn't depend on them. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Acked-by: Pavel Machek <pavel@denx.de>
2014-10-27arm: socfpga: Move code from misc_init_r() to arch_early_init_r()Marek Vasut
Move this initialization code to proper place. The misc_init_r() function is called way too late and the platform initialization code should be executed much earlier. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Acked-by: Pavel Machek <pavel@denx.de>
2014-10-26Merge http://git.denx.de/u-boot-sunxiTom Rini
2014-10-26Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2014-10-26Merge git://git.denx.de/u-boot-dmTom Rini
Fix a trivial conflict over adding <dm.h> Conflicts: arch/arm/cpu/armv7/omap3/board.c Signed-off-by: Tom Rini <trini@ti.com>
2014-10-25spl: add prototype for jump_to_image_no_argsJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25mmc: add prototype for mmc_get_env_addrJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25ide: add missing prototypeJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25gpio: add protype for name_to_gpioJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25fdt_support: add prototypes for __weak functionsJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25elf: add prototype for valid_elf_imageJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25bootm: add prototype for arch_preboot_osJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25string.h: add missing prototypesJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-24sunxi: Increase command line buffer size (CONFIG_SYS_CBSIZE)Ian Campbell
I was running into this limit with a not overly long PXE append line. Since the PXE code wants to print the resulting command line increase CONFIG_SYS_PBSIZE too. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-10-24ARM: sunxi: Add support for using R_UART as consoleChen-Yu Tsai
The A23 only has UART0 muxed with MMC0. Some of the boards we encountered expose R_UART as a set of pads. Add support for R_UART so we can have a console while using mmc. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-24ARM: sunxi: Add basic A23 supportChen-Yu Tsai
The basic blocks of the A23 are similar to the A31 (sun6i). Re-use sun6i code for initial clock, gpio, and uart setup. There is no SPL support for A23, as we do not have any documentation or sample code for DRAM initialization. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-24ARM: sunxi: Add support for uart0 on port F (mmc0)Chen-Yu Tsai
Allwinner SoCs provide uart0 muxed with mmc0, which can then be used with a micro SD breakout board. On the A23, this is the only way to use uart0. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-24ARM: sunxi: Fix build break when CONFIG_MMC is not definedChen-Yu Tsai
BOOT_TARGET_DEVICES includes MMC unconditionally. This breaks when CONFIG_CMD_MMC is not defined. Use a secondary macro to conditionally include it when CONFIG_MMC is enabled, as we do for CONFIG_AHCI. This is used when we want to use uart0 from port F, which conflicts with mmc0. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-24sunxi: Add CONFIG_MACH_TYPE defines to sun4i, sun5i and sun7iHans de Goede
Many people are still using old linux-sunxi-3.4 kernels on sunxi devices, adding the proper MACH_TYPE defines for this allows people to switch to upstream u-boot, so that we can stop maintaining the linux-sunxi u-boot fork. These machine-ids are all properly registered at: http://www.arm.linux.org.uk/developer/machines/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-24sunxi: Add mmc card-detect functionalityHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-24ARM: sunxi: Add basic A31 supportMaxime Ripard
Add a new sun6i machine that supports UART and MMC. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: use SPDX labels, adapt to Kconfig system, drop ifdef around mmc and smp code, drop MACH_TYPE] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-24ARM: sunxi: Fix build break when CONFIG_USB_EHCI is not definedChen-Yu Tsai
BOOT_TARGET_DEVICES includes USB unconditionally. This breaks when CONFIG_CMD_USB is not defined. Use a secondary macro to conditionally include it when CONFIG_EHCI is enabled, as we do for CONFIG_AHCI. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-23serial: uniphier: move CONFIG_UNIPHIER_SERIAL to KconfigMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: serial: use Driver Model for UniPhier serial driverMasahiro Yamada
This commit converts UniPhier on-chip serial driver to driver model. Since UniPhier SoCs do not have Device Tree support, some board files should be added under arch/arm/cpu/armv7/uniphier/ph1-*/ directories. (Device Tree support for UniPhier platform is still under way.) Now the base address and master clock frequency are passed from platform data, so CONFIG_SYS_UNIPHIER_SERIAL_BASE* and CONFIG_SYS_UNIPHIER_UART_CLK should be removed. Tested on UniPhier PH1-LD4 ref board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23serial: add static directive to local functionsMasahiro Yamada
The functions _serial_putc, _serial_putc_raw, _serial_puts, _serial_getc, _serial_tstc, _serial_setbrg are defined and used locally in each of serial_ns16550.c and serial_s3c24x0.c. Add static directive to them and remove declarations from include/common.h. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: move platform data headers to include/dm/platform_dataMasahiro Yamada
The platform_data definitions are generally referenced from both drivers and board files. That is why header files defining platform_data sturectures are placed in "include" directory, but our top level "include" directory is already too cluttered. Let's collect platform_data definitions under the directory "include/dm/platform_data" like Linux gathers ones around under "include/linux/platform_data". This commit moves two header files: include/serial_mxc.h -> include/dm/platform_data/serial_mxc.h include/serial_pl01x.h -> include/dm/platform_data/serial_pl01x.h Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-23dm: x86: Convert coreboot serial to use driver modelSimon Glass
This makes use of the existing device tree node to use driver model for the serial console. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: x86: Convert Intel ICH6 GPIO driver to use driver modelSimon Glass
Convert over this driver, using device tree to pass in the required information. The peripheral is still probed, just the number of GPIO banks and their offsets is in the device tree (previously this was a table in the driver). Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: gpio: Remove unused get_state() uclass methodSimon Glass
This is no longer used so drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: dts: Move omap device tree includes to correct placeSimon Glass
These ended up in arch/arm/dts/dt-bindings temporarily, but in fact the correct place is now include/dt-bindings. Move them to be consistent. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23test: dm: Support memory leak checking as a core featureSimon Glass
Check the state of the malloc() heap before each test is run, so that tests can verify that all is well at the end. Provide helper functions to mark the heap and to check that it returns to its initial state. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: gpio: Add gpio_requestf() helper for printf() stringsSimon Glass
Add a helper which permits a printf()-style format string for the requester string. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: Move the function for getting GPIO status into the uclassSimon Glass
This function can be more easily tested if it is in the uclass. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: gpio: Add gpio_get_function() and friendsSimon Glass
Add helpers to the uclass to allow finding out the pin function. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: gpio: Implement GPIO reservation in the uclassSimon Glass
We have several GPIO drivers now and all are doing similar things to record which GPIOs are reserved. Move this logic into the uclass to make the drivers similar. We retain the request()/free() methods since currently one driver does use these for setting up the pin. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: omap3: Move to driver model for GPIO and serialSimon Glass
Adjust the configuration for the am33xx boards, including beagleboard, to use driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Tom Rini <trini@ti.com>
2014-10-23dm: am33xx: Move to driver model for GPIO and serialSimon Glass
Adjust the configuration for the am33xx boards, including beaglebone black to use driver model. This can be extended to other OMAP boards once platform data is provided for them. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Tom Rini <trini@ti.com>
2014-10-23dm: ns16550: Use an address instead of a pointer for the uart baseSimon Glass
It is inconvenient to have to use casts when specifying platform data. Also it is not strictly correct, since we should use map_sysmem() to convert an address to a pointer. Adjust the platform data to use an address. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
2014-10-23musb: fix warning in include/linux/usb/musb.hIgor Grinberg
Fix the following build warning by including linux/compat.h: include/linux/usb/musb.h:110: warning: 'struct device' declared inside parameter list include/linux/usb/musb.h:110: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2014-10-23Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
2014-10-23kconfig: move CONFIG_USE_PRIVATE_LIBGCC to KconfigMasahiro Yamada
The private libgcc is supported only on ARM, MIPS, PowerPC, SH, x86. Those architectures should "select" HAVE_PRIVATE_LIBGCC and CONFIG_USE_PRIVATE_LIBGCC should depend on it. Currently, this option is enabled on Tegra boards and x86 architecture. Move the definition from header files to Kconfig. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com>
2014-10-23kconfig: move CONFIG_SYS_HZ to lib/KconfigMasahiro Yamada
CONFIG_SYS_HZ is always defined as 1000 in config_fallbacks.h (but some boards still have redundant definitions). This commit moves the definition and the document in README to Kconfig. Since lib/Kconfig can assure that CONFIG_SYS_HZ is 1000, the sanity check in lib/time.c should be removed. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Marek Vasut <marex@denx.de>
2014-10-23am335x_evm: Correct "raw" portions of DFU alt intoTom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2014-10-23arm: am43xx: switch over to CONFIG_ENV_IS_IN_FATFelipe Balbi
By using CONFIG_ENV_IS_IN_FAT it's far easier to have a private, minimal environment for e.g. booting off of network or mounting rootfs on NFS without having to modify the configuration header. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-10-23omap3: overo: Add usb host supportStefan Herbrechtsmeier
Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
2014-10-23omap3: overo: Call bootm only after successful nand readStefan Herbrechtsmeier
Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
2014-10-23ARM: keystone: cmd_ddr3: add ddr3 commands to test ddrHao Zhang
Add ddr3 commands: test <start_addr in hex> <end_addr in hex> - test DDR from start\n address to end address\n ddr compare <start_addr in hex> <end_addr in hex> <size in hex> -\n compare DDR data of (size) bytes from start address to end address\n ddr ecc_err <addr in hex> <bit_err in hex> - generate bit errors\n in DDR data at <addr>, the command will read a 32-bit data\n from <addr>, and write (data ^ bit_err) back to <addr>\n Delete CONFIG_MAX_UBOOT_MEM_SIZE, as it was supposed to be used for ddr3 commands and for now it's not needed any more. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-10-23board: k2e_evm: add network supportHao Zhang
This patch adds network support code and enables keystone_net driver usage for k2e_evm evaluation board. Acked-by: Vitaly Andrianov <vitalya@ti.com> Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-10-23net: keystone_serdes: add keystone K2E SoC supportKhoronzhuk, Ivan
Keystone2 Edison SoC uses the same keystone SerDes driver. This patch adds support for K2E SoCs. Acked-by: Vitaly Andrianov <vitalya@ti.com> Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
generated by cgit (git 2.34.1) at 2025-01-05 03:18:19 +0000