summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2018-04-08treewide: Migrate CONFIG_LAST_STAGE_INIT to KconfigMario Six
Migrate the CONFIG_LAST_STAGE_INIT option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-04-08treewide: Migrate CONFIG_BOARD_EARLY_INIT_R to KconfigMario Six
Migrate the CONFIG_BOARD_EARLY_INIT_R option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-04-08treewide: Migrate CONFIG_SYS_ALT_MEMTEST to KconfigMario Six
Migrate the CONFIG_SYS_ALT_MEMTEST option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc> [trini: Re-run migration after also including CMD_MEMTEST] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-07configs: Finish migration of CONFIG_ATMEL_SPITom Rini
With the previous temporary reverts, we need to re-complete the migration of CONFIG_ATMEL_SPI here now. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-07Revert "spi: atmel: Drop non-dm code"Tom Rini
As we aren't quite able to convert some platforms with a very small size limit in SPL yet, we need to revert this for now. This reverts commit 7b0947787358c6b277431d6b76ce043d8bec641d. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-06image: fit: Show firmware configuration property if presentMichal Simek
SPL ATF support requires to have firmware property which should be also listed by mkimage -l when images is created. The patch is also using this macro in spl_fit to match keyword. When image is created: Default Configuration: 'config' Configuration 0 (config) Description: ATF with full u-boot Kernel: unavailable Firmware: atf FDT: dtb Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jun Nie <jun.nie@linaro.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-06stm32mp1: change STGEN clock source to HSEPatrick Delaunay
No more use static frequency HSI = 64MHz for STGEN clock but HSE (with higher accurency) by default. Need to remove CONFIG_SYS_HZ_CLOCK as arch timer frequency is provided at boot by BootRom and cp15 cntfrq and modified during clock tree initialization if needed. When HSI is no more used by any device, this internal oscillator can be switched off to reduce consumption. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-04-06Allow providing default environment from fileRasmus Villemoes
Modifying the default environment via CONFIG_EXTRA_ENV_SETTINGS is somewhat inflexible, partly because the cpp language does not allow appending to an existing macro. This prevents reuse of "environment fragments" for different boards, which in turn makes maintaining that environment consistently tedious and error-prone. This implements a Kconfig option for allowing one to define the entire default environment in an external file, which can then, for example, be generated programmatically as part of a Yocto recipe, or simply be kept in version control separately from the U-boot repository. Tested-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-04-06stm32mp1: select boot device and partitionPatrick Delaunay
Bootrom loads SPL from SDCARD or eMMC according BootPin selection. Then SPL loads U-Boot on the same mmc device with the following predefined GPT partitioning: on SDCARD: gpt partitioning 1: SPL 2: SPL#2 3: U-Boot 4: bootable partition on eMMC: The 2 boot partitions are used for SPL (2 copy) boot1: SPL boot2: SPL#2 The user partition use gpt partitioning 1: U-Boot 2: bootable partition This patch select the correct SPL partition (3 for SDCARD on mmc0 and 1 for eMMC on mmc1) according the BootRom information saved in TAMP register and based on configuration flasg: - CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION => for BOOT_DEVICE_MMC1 or mmc 0 in U-Boot - CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2 (new) => for BOOT_DEVICE_MMC2 or mmc 1 in U-Boot And the correct boot_targets is selected according the environment variables boot_device and boot_instance, with preboot command, to search the bootable partition with kernel on this device (generic distro support). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-04-06stm32mp1: add eMMC support for ED1Patrick Delaunay
Add command GPT support Add EMMC boot support Add the 2 other SDMMC instances for ED1: - SDMMC2 = mmc 1, eMMC on the ED1 board - SDMMC3 = extension connector, deactivated by default Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-04-06spl: spl_mmc: provide one weak function spl_boot_partitionPatrick Delaunay
The spl_boot_partition function has been added in order to have the possibility to boot on a same binary from different mmc devices with different partitions. By default keep the current behavior, SPL use the partition defined by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Christophe KERELLO <christophe.kerello@st.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-04-06omap3_logic: Fix FDT ADDR for ramdisk bootingAdam Ford
The boot scripts for booting from ramdisk are using ${fdtimage} when they really should be using ${fdtaddr} This patch will fix it so the RAMdisk bootscripts operate correctly. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-04-06input: Drop PS/2 keyboard supportSimon Glass
This is not used by any current board and has not been converted to driver model. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-04-06drivers: serial: remove nonexisting initialisation functionsChristophe Leroy
This patch removes call of serial initialisation functions that are not implemented anymore. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06Handle NETCONSOLE and SPL enabledJason Kridner
NETCONSOLE isn't compiled in with SPL, so the include file needs to recognize that. Signed-off-by: Jason Kridner <jdk@ti.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-06Add support for BeagleBoard.org PocketBeagleJason Kridner
Texas Instruments AM3358 based low-cost board using Octavo Systems OSD3358 SIP with built-in TPS65217 PMIC and 512MB DDR3. Board features small 35mm x 55mm size, high-speed USB OTG, microSD and 72 0.1" expansion header pins with 2xSPI, 2xI2C, 2xUART, USB, 8xADC, up-to-44 GPIO, PRU pins and much more. https://beagleboard.org/pocket This was tested using the am335x_evm_usbspl_defconfig. Note that MII pins are enabled despite not having Ethernet on this board. This avoids an issue where otherwise many timeout errors would be generated. See https://e2e.ti.com/support/arm/sitara_arm/f/791/t/298976 for some related discussion. Signed-off-by: Jason Kridner <jdk@ti.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-04-06Migrate CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSCAlex Kiernan
This converts CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-06powerpc: mpc8xx: cleaning up watchdogChristophe Leroy
In preparation of migration to DM watchdog, clean up a bit. The 8xx watchdog really is a HW watchdog, so declare it as is then it goes through Kconfig And the watchdog reset doesn't mind getting interrupted, so no need to disable interrupts Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06board: MCR3000: Use smaller flash sector for environmentChristophe Leroy
Latest versions of u-boot have increased in size and require more than the 256kb allocated to it. The MCR3000 board is equipped with an AM29LV160DB boot flash which is organised as follows: - One 16kb block - Two 8kb block - One 32kb block - Thirty one 64kb blocks At the time being, u-boot is a single piece occupying the 256 first kbytes, then the environment is stored in the following 64kb block The environment being quite tiny, we save one 64kb block by embedding the environment in the first 8kb block, hence allowing to increase the monitor size to 320kb. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06common: env_embedded: allow fine placement of environment objectChristophe Leroy
Commit 7653942b10e9e ("common/env_embedded.c: drop support for CONFIG_SYS_USE_PPCENV") dropped the .ppcenv section which was used in linking scripts to allow fine placement of embedded environment sections. This implies that GCC randomly places objects from env/embedded.o and environment is not guaranteed to be located at the correct address: 04003df8 g F .text 00000038 mii_init 04004000 g O .text 00000004 env_size 04004004 g O .text 00002000 environment 04006004 g F .text 00000040 .hidden __lshrdi3 This patch restores this capability by allocating each object marked with __UBOOT_ENV_SECTION__ into a different section. Hence 'environment' will be alone in .text.environment, allowing a fine placement in u-boot.lds with: . = DEFINED(env_offset) ? env_offset : .; env/embedded.o (.text.environment) Fixes: 7653942b10e9e ("common/env_embedded.c: drop support for CONFIG_SYS_USE_PPCENV") Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06board: MCR3000: cleanup configChristophe Leroy
Some config is redundant with Kconfig. Fix it. Also remove unused configs Move SDRAM_MAX_SIZE in the only place it is used include/environment.h already defines CONFIG_ENV_SIZE from CONFIG_ENV_SECT_SIZE and defines CONFIG_ENV_ADDR as (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) remove BOOTARGS as bootargs is set by the different boot commands Fix CONFIG_SYS_INIT_RAM_ADDR and CONFIG_SYS_INIT_RAM_SIZE to be in line with CPM DPRAM organisation Remove CONFIG_SYS_GBL_DATA_SIZE, CONFIG_SYS_GBL_DATA_OFFSET and CONFIG_SYS_INIT_SP_OFFSET which are unused Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06powercp: mpc8xx: move commproc.hChristophe Leroy
include/commproc.h is dedicated to the 8xx, rename it cpm_8xx.h and move it into arch/powerpc/include/asm Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06powerpc: mpc8xx: Change CONFIG_8xx to CONFIG_MPC8xxChristophe Leroy
CONFIG_8xx doesn't mean much outside of arch/powerpc/ This patch renames it CONFIG_MPC8xx just like CONFIG_MPC85xx etc ... It also renames 8xx_immap.h to immap_8xx.h to be consistent with other file names. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06spi: atmel: default y if DM_SPI && ARCH_AT91Jagan Teki
ATMEL_SPI is now fully converted to driver-model and respective boards switch to DM_SPI as well, so make default y for ARCH_AT91 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Wenyou Yang <wenyouya@gmail.com>
2018-04-06spi: atmel: Drop non-dm codeJagan Teki
All board configs are now enabled DM_SPI for SPL and U-Boot proper, so now its time to drop non-dm code. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Wenyou Yang <wenyouya@gmail.com>
2018-04-06configs: gurnard: Move CONFIG_ATMEL_SPI to defconfigsJagan Teki
Now CONFIG_ATMEL_SPI is defined in Kconfig, so move the same into defconfig file. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Wenyou Yang <wenyouya@gmail.com>
2018-04-03Merge tag 'arc-for-2018.05' of git://git.denx.de/u-boot-arcTom Rini
More ARC changes and fixes for v2018.05 * Update of ARC tools to the most recent arc-2017.09 * Fix for compile-time warning for AXS10x * Add support of platform-specific commands for HSDK * Add support for on-board SPI flash on HSDK Note though that for write support another series [1] is required. I hope that Jagan will be able to review and act on SPI flash improvement series before we get beyond RC1. Also note that to get clean build for HSDK we need to disable stack-usage check [2] as our current GCC erroneously tries to calculate stack-usage on a naked function which leads to warning. [1] https://patchwork.ozlabs.org/project/uboot/list/?series=35796 [2] https://patchwork.ozlabs.org/patch/894139/
2018-04-02ARC: HSDK: Add platform-specific commandsEugeniy Paltsev
This patch add support of hsdk platform-specific commands: hsdk_clock set - set clock from axi_freq, cpu_freq and tun_freq environment variables/command line arguments hsdk_clock get - save clock frequencies to axi_freq, cpu_freq and tun_freq environment variables hsdk_clock print - show CPU, AXI, DDR and TUNNEL current clock frequencies. hsdk_clock print_all - show all currently used clock frequencies. hsdk_init - setup board HW in one of pre-defined configuration (hsdk_hs34 / hsdk_hs36 / hsdk_hs36_ccm / hsdk_hs38 / hsdk_hs38_ccm / hsdk_hs38x2 / hsdk_hs38x3 / hsdk_hs38x4) hsdk_go - run baremetal application on hsdk configured by hsdk_init command. This patch changes default behaviour of 'bootm' command: now we are able to set number of CPUs to be kicked by setting 'core_mask' environment variable before 'bootm' command run. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-04-01Merge git://git.denx.de/u-boot-dmTom Rini
2018-04-01image.h: add forward declaration of struct fdt_regionMasahiro Yamada
This header needs to know 'fdt_region' is a struct for the fit_region_make_list() prototype. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-01libfdt: move FDT_RAMDISK_OVERHEAD to image-fdt.cMasahiro Yamada
This macro is locally referenced in common/image-fdt.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-01core: ofnode: Fix translation for #size-cells == 0Mario Six
Commit 286ede6 ("drivers: core: Add translation in live tree case") made dev_get_addr always use proper bus translations for addresses read from the device tree. But this leads to problems with certain busses, e.g. I2C busses, which run into an error during translation, and hence stop working. It turns out that of_translate_address() and fdt_translate_address() stop the address translation with an error when they're asked to translate addresses for busses where #size-cells == 0 (comment from drivers/core/of_addr.c): * Note: We consider that crossing any level with #size-cells == 0 to mean * that translation is impossible (that is we are not dealing with a value * that can be mapped to a cpu physical address). This is not really specified * that way, but this is traditionally the way IBM at least do things To fix this case, we check in both the live-tree and non-live tree-case, whether the bus of the device whose address is about to be translated has size-cell size zero. If this is the case, we just read the address as a plain integer and return it, and only apply bus translations if the size-cell size if greater than zero. Signed-off-by: Mario Six <mario.six@gdsys.cc> Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com> Reported-by: Martin Fuzzey <mfuzzey@parkeon.com> Fixes: 286ede6 ("drivers: core: Add translation in live tree case") Reviewed-by: Simon Glass <sjg@chromium.org>
2018-03-31core: add uclass_get_device_by_phandle_id() apiKever Yang
Add api for who can not get phandle from a device property. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-30Merge git://git.denx.de/u-boot-marvellTom Rini
2018-03-30Merge git://git.denx.de/u-boot-riscvTom Rini
2018-03-30arm64: mvebu: a8k: Add distro boot supportMark Kettenis
The various load address values are taken from the a37xx configuration and match the dowstream 'u-boot-2017.03-armada-17.10' release where appropriate. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Stefan Roese <sr@denx.de>
2018-03-30riscv: ae250: Support DT provided by the board at runtimeRick Chen
Enable CONFIG_OF_BOAD to support delivery dtb to u-boot at run time instead of embedded. There are two methods to delivery dtb. 1 Pass from loader: When u-boot boot from RAM, gdb or loader can pass dtb via a2 to u-boot dynamically. Of course gdb or loader shall be in charge of dtb delivery. 2 Configure CONFIG_SYS_FDT_BASE: It can be configured as RAM or ROM base statically, no mater u-boot boot from RAM or ROM. If it was configured as ROM base, dtb can be burned into ROM(spi flash) by spi driver. Meanwhile remove CONFIG_SKIP_LOWLEVEL_INIT which is useless in nx25-ae250 configuration. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
2018-03-30mmc: ftsdc010: Migrate CONFIG_FTSDC010_SDIO to KconfigRick Chen
Convert CONFIG_FTSDC010_SDIO to Kconfig. So CONFIG_FTSDC010_SDIO can also be removed from config_whitelist.txt. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
2018-03-30Drop CONFIG_FTSDC010_NUMBERRick Chen
CONFIG_FTSDC010_NUMBER was not used anymore, can be removed now. So CONFIG_FTSDC010_NUMBER can also be removed from config_whitelist.txt. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
2018-03-28rockchip: rk3399: set fdtfileMark Kettenis
Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-25Merge git://git.denx.de/u-boot-ubiTom Rini
2018-03-24Convert CONFIG_UBI_SILENCE_MSG to KconfigPetr Vorel
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
2018-03-24Convert CONFIG_UBIFS_SILENCE_MSG to KconfigPetr Vorel
Introduce another difference from upstream (kernel) source in fs/ubifs/super.c: adding preprocessor condition as y variable in mount_ubifs() depends on CONFIG_UBIFS_SILENCE_MSG: fs/ubifs/super.c:1337:15: error: variable ?y? set but not used [-Werror=unused-but-set-variable] long long x, y; Not setting CONFIG_UBIFS_SILENCE_MSG in am335x_igep003x_defconfig and igep0032_defconfig. Although it was defined in their config headers, it depends on CMD_UBIFS which is not set for them. Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Heiko Schocher <hs@denx.de>
2018-03-23arm64: zynqmp: Remove ep108 boardMichal Simek
ZynqMP Emulation board is no longer tested and there is no reason to keep maintaining it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23arm64: zynqmp: Changed scratch address used by the alternate memory testVipul Kumar
This patch changed CONFIG_SYS_MEMTEST_SCRATCH address to the accessible DDR address used by alternate memory test. Before this, 0xfffc0000 address was used, which is the OCM address and not enabled in MMU table. So, whenever trying to access 0xfffc0000 address, got Synchronous Abort exception. After changing CONFIG_SYS_MEMTEST_SCRATCH address, alternate memory test is working fine. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23arm64: zynqmp: Add support to load an app at EL1Nitin Jain
This patch is adding support to switch to EL1 while loading an EL1 application with u-boot running at EL above EL1 in aarch64 mode. Signed-off-by: Nitin Jain <nitinj@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-22Merge git://git.denx.de/u-boot-netTom Rini
2018-03-22configs: omapl138: Enable DM and DTLokesh Vutla
Enable Driver Model and Device-tree support for omapl138 board in U-Boot. Also enable DM_SERIAL and DM_I2C. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-03-22davinci: omapl138_lcdk: fix PLL0 frequencyDavid Lechner
commit 1601dd97edc6 ("davinci: omapl138_lcdk: increase PLL0 frequency") changed the PLL0 frequency to 456MHz, which is needed for the LCDC IP block. However, in doing so, it caused the PLLOUT clock to be outside of the allowable specifications given in the OMAP-L138 data sheet. (It says PLLOUT must be 600MHz max). It also uses a PLLM value outside of the range given in the TRM (it says PLLM must in the range 0 to 0x1f). So here is what we have currently: PLLOUT = 24 / (0 + 1) * (37 + 1) = 912MHz (out of spec) ^ ^ ^ CLKIN PREDIV PLLM (out of spec) input to PLLDIVn = 912 / (1 + 1) = 456MHz (desired result) ^ ^ PLLOUT POSTDIV This changes the PLLM value to 18 and the POSTDIV value to 0 so that PLLOUT is now within specification but we still get the desired result. PLLOUT = 24 / (0 + 1) * (18 + 1) = 456MHz (within spec) ^ ^ ^ CLKIN PREDIV PLLM input to PLLDIVn = 456 / (0 + 1) = 456MHz (desired result) ^ ^ PLLOUT POSTDIV Fixes: 1601dd97edc6 ("davinci: omapl138_lcdk: increase PLL0 frequency") Signed-off-by: David Lechner <david@lechnology.com> Reported-by: Sekhar Nori <nsekhar@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2018-03-22net: Drop CONFIG_ENC28J60Tuomas Tynkkynen
Last user of this driver went away in October 2014 in commit d58a9451e7339ed4 ("ppc/arm: zap EMK boards"). Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>