summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-06-03efi_loader: validate load optionHeinrich Schuchardt
For passing the optional data of the load option to the loaded imaged protocol we need its size. efi_deserialize_load_option() is changed to return the size of the optional data. As a by-product we get a partial validation of the load option. Checking the length of the device path remains to be implemented. Some Coverity defects identified the load options as user input because get_unaligned_le32() and get_unaligned_le16() is called. But non of these Coverity defects can be resolved without marking functions with Coverity specific tags. Reported-by: Coverity (CID 303760) Reported-by: Coverity (CID 303768) Reported-by: Coverity (CID 303776) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-31rockchip: Add initial support for the Pinebook Pro laptop from Pine64.Peter Robinson
Specification: - Rockchip RK3399 - 4GB Dual-Channel LPDDR4 - eMMC socket - mSD card slot - 128Mbit (16Mb) SPI Flash - AP6256 for 11AC WiFi + BT5 - 14 inch 1920*1080 eDP MiPi display - Camera - USB 3.0, 2.0 ports - Type-C port with alt-mode display (DP 1.2) and 15W charge - DC 5V/3A - optional PCIe slot for NVMe SSD drive Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Tested-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-31dt-bindings: input: adopt Linux gpio-keys binding constantsPeter Robinson
Sync the gpio-keys input bindings from linux 5.7-rc1. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2020-05-29usb: dwc3: amend UTMI/UTMIW phy interface setupFrank Wang
Let move 8/16-bit UTMI+ interface initialization into DWC3 core init that is convenient for both DM_USB and u-boot traditional process. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29usb: dwc3: Add disable u2mac linestate check quirkJagan Teki
This patch adds a quirk to disable USB 2.0 MAC linestate check during HS transmit. Refer the dwc3 databook, we can use it for some special platforms if the linestate not reflect the expected line state(J) during transmission. When use this quirk, the controller implements a fixed 40-bit TxEndDelay after the packet is given on UTMI and ignores the linestate during the transmit of a token (during token-to-token and token-to-data IPGAP). On some rockchip platforms (e.g. rk3399), it requires to disable the u2mac linestate check to decrease the SSPLIT token to SETUP token inter-packet delay from 566ns to 466ns, and fix the issue that FS/LS devices not recognized if inserted through USB 3.0 HUB. Reference from below Linux commit, commit <65db7a0c9816> ("usb: dwc3: add disable u2mac linestate check quirk") Cc: Marek Vasut <marex@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29usb: dwc3: add dis_u2_freeclk_exists_quirkFrank Wang
Add a quirk to clear the GUSB2PHYCFG.U2_FREECLK_EXISTS bit, which specifies whether the USB2.0 PHY provides a free-running PHY clock, which is active when the clock control input is active. Refer to commit 27f83eeb6b42("usb: dwc3: add dis_u2_freeclk_exists_quirk") in Linux Rockchip Kernel. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-29usb: dwc3: add dis_enblslpm_quirkFrank Wang
Add a quirk to clear the GUSB2PHYCFG.ENBLSLPM bit, which controls whether the PHY receives the suspend signal from the controller. Refer to commit ec791d149bca("usb: dwc3: Add dis_enblslpm_quirk") in Linux Kernel. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-29rockchip: enable USB OHCI host for RockPro64Marcin Juszkiewicz
U-Boot has video output enabled so time to get keyboard working. => usb reset;usb tree resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3a0000: USB OHCI 1.0 Bus usb@fe3c0000: USB EHCI 1.00 Bus usb@fe3e0000: USB OHCI 1.0 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found scanning bus usb@fe3e0000 for devices... 3 USB Device(s) found scanning bus dwc3 for devices... cannot reset port 1!? 2 USB Device(s) found scanning usb for storage devices... 2 Storage Device(s) found USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (12 Mb/s, 0mA) U-Boot Root Hub 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (12 Mb/s, 0mA) | U-Boot Root Hub | +-2 Hub (12 Mb/s, 100mA) | ALCOR Generic USB Hub | +-3 Mass Storage (12 Mb/s, 200mA) Kingston DT 101 G2 001478544887BB3157380157 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Mass Storage (5 Gb/s, 76mA) ADATA ADATA USB Flash Drive 1520405012240002 Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29rk3399: Enable NVMe distro bootcmdMark Kettenis
Include NVME in the list of boot targets if CONFIG_NVME is enabled. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Fix SPI boot on ds414 (Ezra) - Fix PHY mode definition on armada-3720-uDPU (Jakov) - Convert CRS305-1G-4S to generic version (Luka)
2020-05-27cbfs: Don't require the CBFS size with cbfs_init_mem()Simon Glass
The size is not actually used since it is present in the header. Drop this parameter. Also tidy up error handling while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27cbfs: Allow reading a file from a CBFS given its base addrSimon Glass
Currently we support reading a file from CBFS given the address of the end of the ROM. Sometimes we only know the start of the CBFS. Add a function to find a file given that. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27cbfs: Change file_cbfs_find_uncached() to return an errorSimon Glass
This function currently returns a node pointer so there is no way to know the error code. Also it uses data in BSS which seems unnecessary since the caller might prefer to use a local variable. Update the function and split its body out into a separate function so we can use it later. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27cbfs: Return the error code from file_cbfs_init()Simon Glass
We may as well return the error code and use it directly in the command code. CBFS still uses its own error enum which we may be able to remove, but leave it for now. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27cbfs: Use ulong consistentlySimon Glass
U-Boot uses ulong for addresses but there are a few places in this driver that don't use it. Convert this driver over to follow this convention fully. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27cbfs: drop file_cbfs_result declarationChristian Gmeiner
It is not definded anywhere. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.gpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27arm: mvebu: Convert CRS305-1G-4S board to CRS3xx-98DX3236Luka Kovacic
Convert the CRS305-1G-4S board to CRS3xx-98DX3236 to enable easier implementation of new CRS3xx series boards, based on Marvell Prestera 98DX3236. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr>
2020-05-27arm: mvebu: ds414: define CONFIG_SYS_U_BOOT_OFFSEzra Buehler
Without CONFIG_SYS_U_BOOT_OFFS set to CONFIG_SYS_SPI_U_BOOT_OFFS, U-Boot will be located at address 0x16000. But, SPL will try to load the payload from 0x24000 causing the boot to hang. Signed-off-by: Ezra Buehler <ezra@easyb.ch> Reviewed-by: Stefan Roese <sr@denx.de>
2020-05-25sandbox: move compression option to KconfigMichael Walle
CONFIG_BZIP2 and CONFIG_GZIP_COMPRESSED are Kconfig options. Select them by CONFIG_SANDBOX instead of setting them in configs/sandbox.h. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-25Convert CONFIG_CMD_MMC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CMD_MMC Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-25doc: dfu: describe more DFU functionHeinrich Schuchardt
Add some of the missing DFU function descriptions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-25doc: dfu: add DFU to HTML documentationHeinrich Schuchardt
Add the device firmware update functions to the generated HTML documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-22Merge branch 'net' of git://git.denx.de/u-boot-socfpgaTom Rini
- ks8851 cleanups and DM migration
2020-05-22net: ks8851: Add Kconfig entriesMarek Vasut
Convert CONFIG_KS8851_MLL and CONFIG_KS8851_MLL_BASEADDR to Kconfig Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22Merge tag 'u-boot-rockchip-20200522' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix rk3288 chromebook veyron support; - Add pcie driver support for rk3399; - other fixes for rk3399 boards
2020-05-22Merge tag 'efi-2020-07-rc3-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc3 (2) Problems fixed with these patches are: * UEFI sub-system not working with virtio block devices * Missing SATA support in UEFI sub-system * A superfluous debug statement
2020-05-22rockpro64: Enable HDMI output on rockpro64 boardAndrius Štikonas
Reference to commit that adds HDMI to other rk3399 boards: commit 9778edae5576 ("rockchip: Enable HDMI output on rk3399 board w/ HDMI") Signed-off-by: Andrius Štikonas <andrius@stikonas.eu> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Kever Yang <kever.yang@rock-chips.com> Tested-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-21Merge git://git.denx.de/u-boot-shTom Rini
- Enable -ffunction-sections / -fdata-sections --gc-sections to SH - RCar Gen3 updates
2020-05-21efi_loader: device path for SATA devicesHeinrich Schuchardt
Provide device path nodes for SATA devices. This avoids creation of two handles with the same device path indicating our root node. This is what the device paths for a SATA drive with four partitions could like: /VenHw(..)/Sata(0x0,0xffff,0x0) /VenHw(..)/Sata(0x0,0xffff,0x0)/HD(1,MBR,0x81ea591f,0x800,0x63ff830) /VenHw(..)/Sata(0x0,0xffff,0x0)/HD(2,MBR,0x81ea591f,0x6400800,0x9ff830) /VenHw(..)/Sata(0x0,0xffff,0x0)/HD(3,MBR,0x81ea591f,0x6e00800,0x16ef2ab0) /VenHw(..)/Sata(0x0,0xffff,0x0)/HD(4,MBR,0x81ea591f,0x1dcf3800,0x1dcedab0) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-21efi_loader: device path for virtio block devicesHeinrich Schuchardt
The UEFI specification does not define a device sub-type for virtio. Let's use a vendor hardware node here. This avoids creation of two handles with the same device path indicating our root node. Reported-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-21efi_loader: add EFI_MEMORY_SP to memory attributesHeinrich Schuchardt
The UEFI 2.8 specification has introduced the EFI_MEMORY_SP memory attribute. Add it to the 'efidebug memmap' and 'efi mem' commands. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds - QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based platforms - Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
2020-05-20fdtdec: Add weak function to patch U-Boot DT right after fdtdec_setup()Marek Vasut
Add weak function which is called right after fdtdec_setup() configured the U-Boot DT. This permits board-specific adjustments to the U-Boot DT before U-Boot starts parsing the DT. This could be used e.g. to patch in various custom nodes or merge in DT fragments from prior-stage firmware. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-05-19mpc83xx, abb: remove suvd3 boardHeiko Schocher
the mpc83xxx suvd3 variant is not longer used, so remove it. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19mpc83xx: remove redundant MPC83xx_RESET #defineRasmus Villemoes
This macro is only used (tested for existence) in mpc83xx.c, which unconditionally includes mpc83xx.h where it is unconditionally defined. Removing it makes the remaining code easier to read. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-05-19include/configs: ls1046afrwy: add support for boot targets.Pramod Kumar
ls1046afrwy does not support sata boot. So Override default BOOT_TARGET_DEVICES and support only mmc, usb and dhcp as boot targets. Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1012a: Increase CONFIG_SYS_MALLOC_LEN sizeKuldeep Singh
CONFIG_SYS_MALLOC_LEN is currently set to low value and leaves very less space to do malloc in flash environmet. Increase the value to get more memory and also make it align with other boards(ls1046a, ls1043a etc.) config values. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls2080ardb: Make BOOT command access flash memory as per spi-memKuldeep Singh
BOOT command currently access spi-nor flash memory directly. As per spi-mem framework, flash memory access via absolute addresses is no more possible. Use flash APIs to access memory instead of directly using it. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls2080ardb: Make MC_INIT access flash memory as per spi-memKuldeep Singh
MC_INIT command currently access spi-nor flash memory directly. As per spi-mem framework, flash memory access via absolute addresses is no more possible. Use flash APIs to access memory instead of directly using it. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1046a: Move SPI_FLASH_SPANSION to defconfigKuldeep Singh
Enable CONFIG_SPI_FLASH_SPANSION in defconfigs of LS1046ARDB and LS1046AQDS which have two spansion flases i.e s25fs512s each of size 64M. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1012a: Enable CONFIG_SPI_FLASH_SPANSION in defconfigsKuldeep Singh
Since CONFIG_FSL_QSPI is already enabled for LS1012A in defconfigs. Also enable CONFIG_SPI_FLASH_SPANSION for LS1012A boards having spansion flashes. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1043a: Move CONFIG_FSL_QSPI and SPI_FLASH_SPANSION to defconfigKuldeep Singh
Move CONFIG_FSL_QSPI to the board defconfigs and while at it also move CONFIG_SPI_FLASH_SPANSION for LS1043AQDS. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19treewide: Remove unused FSL QSPI config options for Layerscape platformsKuldeep Singh
Some of these options are not used by the driver anymore and some of them are obsolete as the information is gathered from the dt. Also consolidating defines in common headers. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18Use __ASSEMBLY__ as the assembly macrosSimon Glass
Some places use __ASSEMBLER__ instead which does not work since the Makefile does not define it. Fix them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/stringify.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/bug.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop asm_offsets.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop asm/ptrace.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-01-08 16:09:36 +0000