summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-06-30serial: pxa: clean-up platform data include fileMarcel Ziswiler
Clean-up platform data include file by using BIT macro and converting indentation with spaces to tabs. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2020-06-29spi: Move DM_SPI_FLASH and SPI_FLASH_DATAFLASH to Kconfig (for ls1021aXXX)Lukasz Majewski
This patch moves the CONFIG_DM_SPI_FLASH and CONFIG_SPI_FLASH_DATAFLASH to be defined in Kconfig, not in board specific header file (include/configs/<board>.h). Before this change the CONFIG_DM_SPI_FLASH was not set in .config (so it was not possible to use CONFIG_IS_ENABLED(DM_SPI_FLASH) in SPI DM/DTS converted drivers), but it was set in u-boot.cfg file. Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2020-06-29spi: Move DM_SPI_FLASH to Kconfig (for NXP's ls1043a)Lukasz Majewski
This patch fixes issue with defining the DM_SPI_FLASH in the configs/include/<board.h> instead of enabling this option in Kconfig. The problem is that CONFIG_IS_ENABLED(DM_SPI_FLASH) shows false as there is no DM_SPI_FLASH=y in .config (but the define is set in u-boot.cfg). As a result conversion of DM_SPI_FLASH to using CONFIG_IS_ENABLED() is not working properly. Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2020-06-29Convert CONFIG_CADENCE_QSPI to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CADENCE_QSPI Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-29spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*Lukasz Majewski
This change allows more fine tuning of driver model based SPI support in SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI support in SPL and TPL via Kconfig option. Before this change it was necessary to use: /* SPI Flash Configs */ #if defined(CONFIG_SPL_BUILD) #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH #undef CONFIG_SPI_FLASH_MTD #endif in the ./include/configs/<board>.h, which is error prone and shall be avoided when we strive to switch to Kconfig. The goal of this patch: Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL). Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must still support non DM driver. Another use case is the conversion of non DM/DTS SPI driver to support DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the distinction is needed in Kconfig (also if SPL version of the driver supports OF_PLATDATA). In the end of the day one would have to support following use cases (in single driver file - e.g. mxs_spi.c): - U-Boot proper driver supporting DT/DTS - U-Boot proper driver without DT/DTS support (deprecated) - SPL driver without DT/DTS support - SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to run full blown DT/DTS) - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained environment with no fitImage and OF_LIBFDT support). Some boards do require SPI support (with DM) in SPL (TPL) and some only have DM_SPI{_FLASH} defined to allow compiling SPL. This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [trini: Fixup a few platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Kconfig: Remove CONFIG_CLOCKS_IN_MHZTom Rini
This variable is unset anywhere and only unset on a number of platforms. Remove all relevant code. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOOTM_NETBSD to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTM_NETBSD Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26arm: imx: Finish migration of CONFIG_CSF_SIZE to KconfigTom Rini
While in most cases CSF_SIZE is handled via Kconfig we have some i.MX8M platforms that set the size based on the now-renamed CONFIG_SECURE_BOOT symbol. Update things so that CSF_SIZE itself depends on IMX_HAB being enabled and provide the default value for i.MX8M family of parts. Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Ye Li <ye.li@nxp.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com> Fixes: d714a75fd4dc ("imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB") Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Ye Li <ye.li@nxp.com>
2020-06-26nxp: Finish switch to CONFIG_NXP_ESBCTom Rini
There are two remaining users of the CONFIG_SECURE_BOOT symbol that have not been migrated to another symbol. In this case, they should be using CONFIG_NXP_ESBC as their guard. Cc: Vladimir Oltean <olteanv@gmail.com> Fixes: 5536c3c9d0d1 ("freescale/layerscape: Rename the config CONFIG_SECURE_BOOT name") Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_CONSOLE_SCROLL_LINES to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CONSOLE_SCROLL_LINES Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26arm: toradex: Convert CONFIG_CONSOLE_MUX to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CONSOLE_MUX Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-26Convert CONFIG_CONS_INDEX to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CONS_INDEX Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_CMDLINE_EDITING to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CMDLINE_EDITING Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BUILD_TARGET to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BUILD_TARGET Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOUNCE_BUFFER to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOUNCE_BUFFER Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOOTP_DNS2 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTP_DNS2 CONFIG_BOOTP_PXE_CLIENTARCH Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26arm: abb secu1: Convert CONFIG_BOOTDELAY to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTDELAY Cc: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26arm: capricorn: Convert CONFIG_BOOTCOUNT_ENV et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTCOUNT_ENV CONFIG_BOOTCOUNT_LIMIT Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOARD_TYPES to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_TYPES Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BCH to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BCH Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOOTARGS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOARD_EARLY_INIT_F et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F CONFIG_BOARD_EARLY_INIT_R Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BAUDRATE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BAUDRATE Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26bk4r1: Re-convert CONFIG_AUTOBOOT_PROMPT et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_AUTOBOOT_PROMPT CONFIG_AUTOBOOT_KEYED CONFIG_AUTOBOOT_STOP_STR Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_ATMEL_USART to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ATMEL_USART Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_ATMEL_NAND_HW_PMECC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ATMEL_NAND_HW_PMECC CONFIG_ATMEL_NAND_HWECC CONFIG_NAND_ATMEL CONFIG_PMECC_CAP CONFIG_PMECC_SECTOR_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_ATMEL_HLCD to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ATMEL_HLCD Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_AT91_GPIO to KconfigTom Rini
This converts the following to Kconfig: CONFIG_AT91_GPIO Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_ARM_PL180_MMCI to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ARM_PL180_MMCI Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_ARCH_MISC_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ARCH_MISC_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_AM335X_LCD to KconfigTom Rini
This converts the following to Kconfig: CONFIG_AM335X_LCD Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-25bdinfo: arm: Move ARM-specific info into its own fileSimon Glass
We don't really want to have ARM-specific code in a generic file. Create a new arch-specific function to hold it, and move it into that. Make the function weak so that any arch can implement it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: Export some basic printing functionsSimon Glass
At present the functions to print a number and a frequency are static. We want to move some of the code in here to an arch-specific file. For consistency that code should use these same functions. So export them with an appropriate name. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: net: ppc: Drop bi_enet1addr and other similar infoSimon Glass
These values were 'old' in 2013 so it should be safe to remove them. They are never set in U-Boot anyway, so the values will always be zero. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-06-25bdinfo: m68k: Drop bd_info->bi_ipbfreqSimon Glass
This field is not used anymore. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25Merge tag 'xilinx-for-v2020.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.10 Versal: - xspi bootmode fix - Removing one clock from clk driver - Align u-boot memory setting with OS by default - Map TCM and OCM by default ZynqMP: - Minor DT improvements - Reduce console buffer for mini configurations - Add fix for AMS - Add support for XDP platform Zynq: - Support for AES engine - Enable bigger memory test by default - Extend documentation for SD preparation - Use different freq for Topic miami board mmc: - minor GD pointer removal net: - Support fixed-link cases by zynq gem - Fix phy looking loop in axi enet driver spi: - Cleanup global macros for xilinx spi drivers firmware: - Add support for pmufw reloading fpga: - Improve error status reporting common: - Remove 4kB addition space for FDT allocation
2020-06-24arm64: zynqmp: Reduce console buffer sizeT Karthik Reddy
Reduce console buffer size to 1kbyte to accommodate memory allocations in mini u-boot for zynqmp. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24fpga: zynqpl: Correct PL bitstream loading sequence for zynqaesSiva Durga Prasad Paladugu
Correct the PL bitstream loading sequence for zynqaes command by clearing the loaded PL bitstream before loading the new encrypted bitstream using the zynq aes command. This was done by setting the PROG_B same as in case of fpgaload commands. This patch fixes the issue of loading the encrypted PL bitstream onto the PL in which a bitstream has already been loaded successfully. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24arm: versal: Fix xspi0 boot modeMichal Simek
Use proper number to be aligned with xspi0 boot mode. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-22arm: wandboard: move CONFIG_MXC_UART to defconfigHeinrich Schuchardt
For using a debug UART on the Wandboard CONFIG_MXC_UART=y must be set in the .config file. To avoid duplicate definitions move the setting from include/configs/wandboard.h to configs/wandboard_defconfig. Document the debug UART settings in the README. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-06-22colibri_imx6: boot env configuration updatesIgor Opaniuk
1. Drop legacy emmcboot wrapper from env. 2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP 3. Drop DFU defines Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-22colibri_imx7: boot env configuration updatesIgor Opaniuk
1. Drop legacy emmcboot wrapper from env. 2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP 3. Drop DFU defines Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-22apalis_imx6: boot env configuration updatesIgor Opaniuk
1. Drop legacy emmcboot wrapper from env. 2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP 3. Drop DFU defines Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-22apalis-tk1: enable distrobootIgor Opaniuk
1. Use distro_bootcmd as default boot command instead of legacy emmcboot wrapper. 2. Drop emmcboot and sdboot wrappers. 3. Provide proper boot order for Distro Boot. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-22configs/colibri_vf.h: drop sdboot in favour of distro_bootcmdMax Krummenacher
The distro bootscript uses kernel_image to get the file name of the kernel, so change that variable name. UBI boot has precedence in the default boot command. If one wants to boot from SD with a working NAND installation stop in U-Boot and enter: setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-06-22colibri-imx6ull/imx7: define bootubipart for distro bootStefan Agner
When using distro boot to boot from UBI volumes the boot partition has been hardcoded to "UBI" (capital letters). However, our default MTD layout uses "ubi" (lower case letter). Define "ubi" as the default UBI partition for distro boot for Toradex. This allows to use distro boot without having to redefine the MTD partition layout which is useful for TorizonCore. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2020-06-22colibri_imx7: add addresses required for distro bootStefan Agner
Define addresses required for full distro boot support. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2020-06-22colibri-imx8x: declare consoleargsOleksandr Suvorov
Store all console-related kernel parameters in dedicated variable. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-06-22mx6cuboxi: Convert to DM_ETHFabio Estevam
Migration to DM_ETH is mandatory, so convert mx6cuboxi to Ethernet Driver Model. This also brings the benefit of restoring Ethernet functionality. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Tom Rini <trini@konsulko.com>
2020-06-20Merge branch 'net' of https://gitlab.denx.de/u-boot/custodians/u-boot-sh ↵Tom Rini
into next - Convert pcnet and eepro100 ethernet drivers to DM
generated by cgit (git 2.34.1) at 2024-12-26 01:36:16 +0000