summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2015-01-07mx6sxsabresd: support qspi flash bigger than 16MBPeng Fan
mx6sxsabresd revb board uses 32MB qspi flash, reva board uses 16MB qspi flash. Currently, the default supported platform is revb board. If want to configure for reva board, just define CONFIG_MX6SX_SABRESD_REVA in mx6sxsabresd.h to support reva qspi flashes whose size is 16MB. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2015-01-05powerpc: mpc824x: remove MPC824X cpu supportMasahiro Yamada
All the MPC824X boards are still non-generic boards: A3000, CPC45, CU824, eXalion, MVBLUE, MUSENKI, Sandpoint824x, utx8245 Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Josef Wagner <Wagner@Microsys.de> Cc: Torsten Demke <torsten.demke@fci.com> Cc: Jim Thompson <jim@musenki.com> Cc: Greg Allen <gallen@arlut.utexas.edu>
2015-01-05mpc8260: remove atc board supportMasahiro Yamada
These boards are still non-generic boards. drivers/rtc/ds12887.c should also be removed because it can not be built without CONFIG_ATC. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
2015-01-05mpc8260: remove CPU86, CPU87 board supportMasahiro Yamada
These boards are still non-generic boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
2015-01-05mpc8260: remove ep82xxm board supportMasahiro Yamada
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-05mpc8260: remove gw8260 board supportMasahiro Yamada
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Oliver Brown <obrown@adventnetworks.com>
2015-01-05mpc8260: remove IPHASE4539 board supportMasahiro Yamada
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Grandegger <wg@denx.de>
2015-01-05mpc8260: remove muas3001 board supportMasahiro Yamada
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Heiko Schocher <hs@denx.de>
2015-01-05mpc8260: remove PM825, PM826, PM828 board supportMasahiro Yamada
These boards are still non-generic boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
2015-01-05mpc8260: remove MPC8266ADS board supportMasahiro Yamada
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Rune Torgersen <runet@innovsys.com>
2015-01-05mpc8260: remove VoVPN-GW board supportMasahiro Yamada
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-05mpc8260: remove ep8260 board supportMasahiro Yamada
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Frank Panno <fpanno@delphintech.com>
2015-01-05mpc8260: remove ppmc8260 board supportMasahiro Yamada
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Brad Kemp <Brad.Kemp@seranoa.com>
2015-01-05mpc8260: remove sacsng board supportMasahiro Yamada
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
2015-01-05powerpc: remove cogent_8xx, cogent_mpc8260 board supportMasahiro Yamada
These boards are still non-generic boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Murray Jensen <Murray.Jensen@csiro.au>
2015-01-05mpc8xx: remove ESTEEM192E board supportMasahiro Yamada
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Conn Clark <clark@esteem.com>
2015-01-05mpc8xx: remove IP860 board supportMasahiro Yamada
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
2015-01-05mpc8xx: remove IVMS8, IVML24 board supportMasahiro Yamada
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
2015-01-05mpc8xx: remove lwmon board supportMasahiro Yamada
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
2015-01-05mpc8xx: remove NETVIA board supportMasahiro Yamada
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Pantelis Antoniou <panto@intracom.gr>
2015-01-05mpc8xx: remove R360MPI board supportMasahiro Yamada
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
2015-01-05mpc8xx: remove RRvision board supportMasahiro Yamada
This board is still a non-generic board. Unused code in arch/powerpc/cpu/mpc8xx/video.c should be also deleted because CONFIG_VIDEO_ENCODER_AD7176, CONFIG_VIDEO_ENCODER_AD7177, CONFIG_VIDEO_ENCODER_AD7179 are not defined any more. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
2015-01-05mpc8xx: remove SPD823TS board supportMasahiro Yamada
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
2015-01-05mpc8xx: remove KUP4X, KUP4K board supportMasahiro Yamada
These boards are still non-generic boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Klaus Heydeck <heydeck@kieback-peter.de>
2015-01-05mpc8xx: remove ELPT860 board supportMasahiro Yamada
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: The LEOX team <team@leox.org>
2015-01-05powerpc: manroland: remove uc100, uc101, mucmc52, hmi1001 supportMasahiro Yamada
These boards are still non-generic boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Heiko Schocher <hs@denx.de> Cc: Stefan Roese <sr@denx.de>
2015-01-05mpc8xx: remove FPS{850, 860}L, NSCU, SM850, TK885D, virtlab2 supportMasahiro Yamada
These boards are still non-generic boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
2015-01-02Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2015-01-01Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
2014-12-31Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
Conflicts: include/configs/arndale.h Signed-off-by: Tom Rini <trini@ti.com>
2014-12-31usb: eth: enable AX88179 DRIVER for ARNDALE 5250Rene Griessl
Patch enables AX88179 driver for ARNDALE 5250 Signed-off-by: Rene Griessl <rgriessl@cit-ec.uni-bielefeld.de>
2014-12-31usb: eth: add ASIX AX88179 DRIVERRene Griessl
This patch adds driver support for the ASIX AX88179 USB3.0 to GbE network adapter. Driver has been tested on the RECS5250 COM module (similar to ARDALE5250). Testcase was DHCP and PXE boot. Signed-off-by: Rene Griessl <rgriessl@cit-ec.uni-bielefeld.de>
2014-12-31imx:mx6slevk add spi nor boot supportPeng Fan
Add spi nor boot support for mx6slevk board. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-12-31imx:mx6sxsabresd add qspi supportPeng Fan
Configure the pad setting and enable qspi clock to support qspi flashes access. Add QSPI related macro in configuration header file. Note: mx6sxsabresd Revb board, 32M flash is used, but in header file, CONFIG_SPI_FLASH_BAR is not defined, and we still use SZ_16M. The LUT initialization qspi_set_lut function uses 32BIT addr, however CONFIG_SPI_FLASH_BAR and 24BIT addr should be used to access bigger than 16MB size flash, and BRRD/BRWR should also be supported. Future patches will fix this. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-12-30Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2014-12-30Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2014-12-30Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini
2014-12-30arm: mx6: novena: Add proper LVDS display supportMarek Vasut
Repair the register configuration and add proper support for the display attached to both LVDS channels. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Sean Cross <xobs@kosagi.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com>
2014-12-30arm: mx6: novena: Minor config file fixMarek Vasut
Sequence like the following is completely useless and results from an errorneous ordering of the statements during development. Zap it. #ifdef FOO #define FOO Signed-off-by: Marek Vasut <marex@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Sean Cross <xobs@kosagi.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com>
2014-12-30arm: mx6: novena: Define CONFIG_SYS_MALLOC_F_LENMarek Vasut
This board uses setup_i2c() in SPL. The setup_i2c() function internally calls gpio_request(), which in turn internally calls strdup(). The strdup() requires a running mallocator, so this patch makes the mallocator available. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Sean Cross <xobs@kosagi.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com>
2014-12-30arm: mx6: gw_ventana: Define CONFIG_SYS_MALLOC_F_LENMarek Vasut
This board uses setup_i2c() in SPL. The setup_i2c() function internally calls gpio_request(), which in turn internally calls strdup(). The strdup() requires a running mallocator, so this patch makes the mallocator available. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Sean Cross <xobs@kosagi.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com>
2014-12-30embestmx6boards: convert to use config_distro_bootcmd.hIain Paton
Since the Riot & Mars boards are dev boards it's likely people will want to run standard distros on them. So replace the current boot scripts with the standard one from config_distro_bootcmd.h Signed-off-by: Iain Paton <ipaton0@gmail.com> Tested-by: Nikolay Dimitrov <picmaster@mail.bg>
2014-12-30embestmx6boards: convert to use config_distro_defaults.hIain Paton
Update to use config_distro_defaults.h and remove explicit settings Signed-off-by: Iain Paton <ipaton0@gmail.com> Tested-by: Nikolay Dimitrov <picmaster@mail.bg>
2014-12-30Merge branch 'master' of git://git.denx.de/u-bootStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2014-12-30Exynos: Move down common USB configurationSjoerd Simons
USB is a pretty common feature on exynos 5 board, so it seems sensible to configure it directly from exynos5-common. As a side-effect this makes USB available from u-boot on exynos 5420 based boards. While there enable support for common USB ethernet cards to make it more likely the default config allows booting for network and enable XHCI on SMDK5420 which has it defined in the dts but not in its config. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-12-29vexpress64: switch to generic boardLinus Walleij
The few Versatile Express ARMv8 platforms we have may just as well be switched to generic board from the beginning. Tested on the ARM foundation model and the in progress support for the ARMv8 Juno board. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Steve Rae <srae@broadcom.com>
2014-12-22odroid-XU3: Add entry for DTS EHCI GPIOSjoerd Simons
Add samsung,vbus-gpio information for the XU3. This allows the usage of the EHCI controller on the XU3, which is connected to the SMSC LAN9514 chip (usb hub + network). Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-12-22exynos5420: fix compilation without parade videoSjoerd Simons
Not all exynos 5420 based devices with an LCD also have a parade LVDS bridge. So make sure compilation doesn't break if CONFIG_LCD is enabled and CONFIG_VIDEO_PARADE is not. As a side-effect move the parade functions from the exynos system header file to its own file. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-12-22Odroid-XU3: Add support for Odroid-XU3Hyungwon Hwang
This patch adds support for Odroid-XU3. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-12-22config: exynos5420: move non common configs to specific board filesHyungwon Hwang
The media for boot and environment is a board-specific feature, not a processor-specific. This is same to console port number and some other addresses. This patch moves the that kinds of configs to each board-specific files from the common config file for Exynos5420. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
generated by cgit (git 2.34.1) at 2024-12-29 02:51:18 +0000