summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-05-07efi_selftest: remove redundant function efi_st_memcmp()Heinrich Schuchardt
Function memcmp() is available in efi_freestanding.c. So we do not remove a further implementation. Replace all usages of efi_st_memcmp() by memcmp(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_loader: unload applications upon Exit()Heinrich Schuchardt
Implement unloading of images in the Exit() boot services: * unload images that are not yet started, * unload started applications, * unload drivers returning an error. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_loader: implement UnloadImage()Heinrich Schuchardt
Implement the UnloadImage() boot service Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_loader: mark started imagesHeinrich Schuchardt
In UnloadImage() we need to know if an image is already started. Add a field to the handle structure identifying loaded and started images. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- RZ/A1 addition. - Old board removal.
2019-05-07Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- Assorted stratix10 fixes. - DDR driver DM migration.
2019-05-07ARM: dts: renesas: Add RZ/A1 GR-Peach boardChris Brandt
Add board code and DTs for Renesas RZ/A1 SoC-based GR-Peach, which is a cheap development platform with RZ/A1H SoC. The DTs are imported from Linux 5.0.11, commit d5a2675b207d . Currently supported are UART, ethernet and RPC SPI. The board can be booted from RPC SPI by writing the u-boot.bin binary to the beginning of the SPI NOR, e.g. using the "sf" command. The board can also be booted via JTAG by setting text base to 0x20020000, loading u-boot.bin there via JTAG and executing it from that address. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07ARM: dts: renesas: Add RZ/A1 platform codeChris Brandt
Add platform code and DTs for Renesas RZ/A1 R7S72100 SoC. Distinguishing feature of this SoC is that it has up to 10 MiB of on-SoC static RAM (SRAM). The DTs are imported from Linux 5.0.11, commit d5a2675b207d . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07sh: sh7785lcr: Remove the boardMarek Vasut
Last change to this board was done in 2016, it uses non-DM USB with no prospects of ever being converted to DM USB, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2019-05-07sh: ecovec: Remove the boardMarek Vasut
Last change to this board was done in 2016, it uses non-DM USB with no prospects of ever being converted to DM USB, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2019-05-06Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Various pinctrl / gpio fixes for R-Car
2019-05-06arm: socfpga: Move Stratix 10 SDRAM driver to DMLey Foon Tan
Convert Stratix 10 SDRAM driver to device model. Get rid of call to socfpga_per_reset() and use reset framework. SPL is changed from calling function in SDRAM driver directly to just probing UCLASS_RAM. Move sdram_s10.h from arch to driver/ddr/altera directory. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-05-06ddr: altera: Compile ALTERA SDRAM in SPL onlyLey Foon Tan
Compile ALTERA_SDRAM driver in SPL only. Rename ALTERA_SDRAM to SPL_ALTERA_SDRAM. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-05-05ARM: da850evm: Enable da850-ohci USB host controllerAdam Ford
The DA850 EVM has one USB 1.1 OHCI Host controller. With the host controller now support DM_USB, this patch enables the respective functions for the da850evm. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-05lib: add Zstandard decompression supportMarek Behún
Add the zstd library from Linux kernel (only decompression support). There are minimal changes to build with U-Boot, otherwise the files are identical to Linux commit dc35da16 from March 2018, the files had not been touched since in kernel. Also SPDX lincese tags were added. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2019-05-05lib: Add xxhash supportMarek Behún
This adds the xxhash support from Linux. Files are almost identical to those added to Linux in commit 5d240522 ("lib: Add xxhash module") (they haven't been touched since in Linux). The only difference is to add some includes to be compatible with U-Boot. Also SPDX lincese tags were added. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2019-05-05dm: cache: Create a uclass for cacheDinh Nguyen
The cache UCLASS will be used for configure settings that can be found in a CPU's L2 cache controller. Add a uclass and a test for cache. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-05-05Refactor IMAGE_ENABLE_VERIFY to handle builds without SPL verificationAlex Kiernan
If building with SPL_LOAD_FIT_FULL and FIT_SIGNATURE, but without SPL_FIT_SIGNATURE then the build fails with: common/built-in.o: In function `fit_image_verify_with_data': common/image-fit.c:1220: undefined reference to `fit_image_verify_required_sigs' common/image-fit.c:1244: undefined reference to `fit_image_check_sig' common/built-in.o: In function `fit_image_load': common/image-fit.c:1857: undefined reference to `fit_config_verify' Refactor so that host builds still depend on FIT_SIGNATURE, but target builds check FIT_SIGNATURE/SPL_FIT_SIGNATURE dependent on the build. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-04Merge tag 'mips-pull-2019-05-03' of git://git.denx.de/u-boot-mipsTom Rini
- mscc: small fixes, enhance network support for Serval, Luton and Ocelot - mt7620: rename arch to more generic name mtmips - mips: pass initrd addresses via DT as physical addresses
2019-05-04Merge tag 'mmc-2019-5-3' of https://github.com/MrVan/u-bootTom Rini
2019-05-04pinctrl: gpio: Add callback for configuring pin as GPIOMarek Vasut
Add callback to configure, and de-configure, pin as a GPIO on the pin controller side. This matches similar functionality in Linux and aims to replace the ad-hoc implementations present in U-Boot. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: Christoph Muellner <christoph.muellner@theobroma-systems.com> Cc: Eugeniu Rosca <roscaeugeniu@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick DELAUNAY <patrick.delaunay@st.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Simon Glass <sjg@chromium.org>
2019-05-04Convert CONFIG_SUPPORT_EMMC_BOOT to KconfigAlex Kiernan
This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT As requested by Michal Simek <michal.simek@xilinx.com>, these boards have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated: xilinx_zynqmp_zc1275_revB xilinx_zynqmp_zc1751_xm018_dc4 xilinx_zynqmp_zc1751_xm019_dc5 xilinx_zynqmp_zcu100_revC xilinx_zynqmp_zcu102_rev1_0 xilinx_zynqmp_zcu102_revA xilinx_zynqmp_zcu102_revB xilinx_zynqmp_zcu104_revA xilinx_zynqmp_zcu104_revC xilinx_zynqmp_zcu106_revA xilinx_zynqmp_zcu111_revA Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-05-03Merge git://git.denx.de/u-boot-marvellTom Rini
- Fix in kwbimage (return code checking) (Young Xiao) - Misc updates to Turris Omnia (Marek)
2019-05-03net: mscc: ocelot: Update DTS for Luton pcb90Horatiu Vultur
Update device tree for luton to add support for luton pcb90. This pcb has 24 ports from which 12 ports are connected to SerDes6G. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03net: mscc: ocelot: Update DTS for Ocelot pcb120.Horatiu Vultur
Update device tree for ocelot to add support for ocelot pcb120. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03net: mscc: serval: Add ethernet nodes for ServalHoratiu Vultur
Add ethernet nodes for Serval SoCs family. There are 2 pcb in this family: pcb105 and pcb106. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03mmc: sdhci: Add Support for ADMA2Faiz Abbas
The Standard Host Controller Interface (SDHCI) specification version 3.00 adds support for Advanced DMA (ADMA) for both 64 and 32 bit widths of DMA. ADMA2 uses a table of descriptors for aggregating DMA requests. This significantly improves read and write throughput. Add Support for the same. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-05-03mmc: sdhci: Move DMA handling to prepare_dma() functionFaiz Abbas
In preparation for addition of ADMA2 support, cleanup SDMA handling by moving it to a new sdhci_prepare_dma() function. Also add a flags field in sdhci_host to indicate if DMA is enabled. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-05-03Merge branch '2019-05-03-master-imports'Tom Rini
- Various btrfs fixes - Various TI platform fixes - Other fixes (cross build, taurus update, Kconfig help text)
2019-05-03arm: dts: k3-am654: Sync IOPAD macros with LinuxAndreas Dannenberg
Transition to the IOPAD macros as used in Linux in which the pin mux mode is specified using a dedicated parameter while also dropping the related MUX_MODEx macros that are no longer needed. This transition will allow us to keep both Linux and U-Boot DTS in sync more easily. While at it also align the file name of the include file itself and update any references accordingly. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-05-03at91: cleanup taurus portHeiko Schocher
- at91sam9g20-taurus.dts: use labels - cleanup taurus port to compile clean with current mainline again. SPL has no serial output anymore, so it fits into SRAM. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-05-03fs: correct comments for fs_read() and write()Heinrich Schuchardt
The existing comments where confusing read and write. The comment for fs_write() had: "@addr: The address to read into" So let's rework the comments and format them in Sphinx style. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-03Merge tag 'efi-2019-07-rc2' of git://git.denx.de/u-boot-efiTom Rini
Pull request for UEFI sub-system for v2019.07-rc2 This pull request provides error fixes for the handling of GPT partitions and for the UEFI subsystem.
2019-05-03arm: mvebu: turris_omnia: add SCSI as boot targetMarek Behún
If SCSI is enabled, U-Boot should try to boot also from SCSI device on Turris Omnia. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03arm: mvebu: turris_omnia: move I2C dependencies to KconfigMarek Behún
The I2C dependencies are defined in include/configs/turris_omnia.h, because Turris Omnia won't boot correctly without I2C support. Move these dependencies to Kconfig, so that they are selected if Turris Omnia is selected as target. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03arm: mvebu: turris_omnia: remove legacy macros from board headerMarek Behún
These are not needed if MMC and SCSI DM drivers are used. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-02efi_selftest: test exit_dataHeinrich Schuchardt
Amend the unit test 'start image exit' to transfer a string as exit data. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-02efi_loader: implement support of exit dataHeinrich Schuchardt
In case of a failure exit data may be passed to Exit() which in turn is returned by StartImage(). Let the `bootefi` command print the exit data string in case of an error. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-02efi_loader: optional data in load options are binaryHeinrich Schuchardt
The field boot OptionalData in structure _EFI_LOAD_OPTIONS is for binary data. When we use `efidebug boot add` we should convert the 5th argument from UTF-8 to UTF-16 before putting it into the BootXXXX variable. When printing boot variables with `efidebug boot dump` we should support the OptionalData being arbitrary binary data. So let's dump the data as hexadecimal values. Here is an example session protocol: => efidebug boot add 00a1 label1 scsi 0:1 doit1 'my option' => efidebug boot add 00a2 label2 scsi 0:1 doit2 => efidebug boot dump Boot00A0: attributes: A-- (0x00000001) label: label1 file_path: .../HD(1,MBR,0xeac4e18b,0x800,0x3fffe)/doit1 data: 00000000: 6d 00 79 00 20 00 6f 00 70 00 74 00 69 00 6f 00 m.y. .o.p.t.i.o. 00000010: 6e 00 00 00 n... Boot00A1: attributes: A-- (0x00000001) label: label2 file_path: .../HD(1,MBR,0xeac4e18b,0x800,0x3fffe)/doit2 data: Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-01Merge tag 'rockchip-for-2019.07' of git://git.denx.de/u-boot-rockchipTom Rini
Improvements and new features: - improved SPI driver for better read throughput - refactors initialisation of debug UART init - restructures header file paths - adds pinctrl improvements Adds Kever as a co-custodian.
2019-05-01Merge tag 'u-boot-imx-20190426' of git://git.denx.de/u-boot-imxTom Rini
Porting to DM and i.MX8 ------------------------ - warp7 to DM - kp_imx53 to DM - Warnings in DT - MX8QM support - colibri-imx6ull to DM - imx7d-pico to DM - ocotp for MX8
2019-05-01rockchip: use 'arch-rockchip' as header file pathKever Yang
Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common header file path, so that we can get the correct path directly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-04-29configs: move CONFIG_SPL_TEXT_BASE to KconfigSimon Goldschmidt
Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing values. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-26avb: add support for named persistent valuesIgor Opaniuk
AVB 2.0 spec. revision 1.1 introduces support for named persistent values that must be tamper evident and allows AVB to store arbitrary key-value pairs [1]. Introduce implementation of two additional AVB operations read_persistent_value()/write_persistent_value() for retrieving/storing named persistent values. Correspondent pull request in the OP-TEE OS project repo [2]. [1]: https://android.googlesource.com/platform/external/avb/+/android-9.0.0_r22 [2]: https://github.com/OP-TEE/optee_os/pull/2699 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-04-26firmware: ti_sci: Modify auth_boot TI-SCI API to match new versionAndrew F. Davis
SYSFW version 2019.01 introduces a slightly modified version of this API, add support for it here. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>
2019-04-26firmware: ti_sci: Add support for firewall managementAndrew F. Davis
TI-SCI message protocol provides support for controlling the firewall configurations available in SoC. Introduce support for the set of TI-SCI message protocol APIs that provide us with this capability of controlling firewalls. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>
2019-04-26main: add new bootstage ID for entering cli loopHeiko Schocher
adding a new bootstage ID: BOOTSTAGE_ID_ENTER_CLI_LOOP Signed-off-by: Heiko Schocher <hs@denx.de>
2019-04-26Merge git://git.denx.de/u-boot-marvellTom Rini
- Add DM based generic watchdog start and reset implementation and remove all ad-hoc implementations (Stefan) - Move mv_sdhci to DM (Pierre) - Misc turris_omnia updates (Pierre) - Change openrd targets to correctly build again (size changes and fixes to the dts targets) and bring it back into Travis builds (Stefan) - Add Kirkwood db-88f6281-bp board (Chris)
2019-04-26Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2019-04-26watchdog: Implement generic watchdog_reset() versionStefan Roese
This patch tries to implement a generic watchdog_reset() function that can be used by all boards that want to service the watchdog device in U-Boot. This watchdog servicing is enabled via CONFIG_WATCHDOG. Without this approach, new boards or platforms needed to implement a board specific version of this functionality, mostly copy'ing the same code over and over again into their board or platforms code base. With this new generic function, the scattered other functions are now removed to be replaced by the generic one. The new version also enables the configuration of the watchdog timeout via the DT "timeout-sec" property (if enabled via CONFIG_OF_CONTROL). This patch also adds a new flag to the GD flags, to flag that the watchdog is ready to use and adds the pointer to the watchdog device to the GD. This enables us to remove the global "watchdog_dev" variable, which was prone to cause problems because of its potentially very early use in watchdog_reset(), even before the BSS is cleared. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Marek Behún" <marek.behun@nic.cz> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Maxim Sloyko <maxims@google.com> Cc: Erik van Luijk <evanluijk@interact.nl> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Weijie Gao <weijie.gao@mediatek.com> Cc: Simon Glass <sjg@chromium.org> Cc: "Álvaro Fernández Rojas" <noltari@gmail.com> Cc: Philippe Reynes <philippe.reynes@softathome.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu100)
generated by cgit (git 2.34.1) at 2024-12-25 05:41:07 +0000