summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2014-10-09arm: rmobile: koelsch: Add CONFIG_SCIF_USE_EXT_CLKNobuhiro Iwamatsu
SCIF of koelsch use external clock mode. This enables external clock mode on koelsch board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2014-10-09arm: rmobile: lager: Add CONFIG_SCIF_USE_EXT_CLKNobuhiro Iwamatsu
SCIF of lager use external clock mode. This enables external clock mode on lager board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2014-10-09arm: rmobile: lager: Fix value of CONFIG_SH_SCIF_CLK_FREQNobuhiro Iwamatsu
The clock of SCIF (serial port) of lager is supplied from External Clock. And value of clock is 14.7456MHz. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2014-10-08Merge remote-tracking branch 'u-boot-imx/master'Albert ARIBAUD
The single file conflict below is actually trivial. Conflicts: board/boundary/nitrogen6x/nitrogen6x.c
2014-10-07Merge branch 'u-boot-marvell/master' into 'u-boot-arm/master'Albert ARIBAUD
2014-10-06nitrogen6x: config: enable EXT4 filesystemKevin Mihelich
Support reading/writing ext4 partitions. Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06nitrogen6x: config: enable Android fastbootEric Nelson
Enable 'fastboot' command. This is currently enabled but not yet functional. Including it in the configuration will ease further testing and development as discussed on the mailing list. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06nitrogen6x: config: add gpio commandEric Nelson
Enable the 'gpio' command to allow reading and toggling of GPIO pins. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06nitrogen6x: config: disable logoEric Nelson
Some users (QNX and Windows CE users in particular) have asked to disable the Penguin shown on the display at boot time. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
2014-10-06nitrogen6x: config: allow more bootargs parametersTroy Kisky
Increase the maximum number of arguments allowed by the Hush parser. This prevents errors when users or scripts aren't quoting parameters when setting the "bootargs" variable et al. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06nitrogen6x: config: enable "i2c edid"Eric Nelson
Enable the "i2c edid" command to query data from an attached HDMI monitor. Usage is typically this: U-Boot > i2c dev 1 U-Boot > i2c edid 0x50 ... Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06nitrogen6x: config: add CONFIG_CMD_MEMTESTEric Nelson
Enable the 'mtest' command on Nitrogen6x and SABRE Lite boards. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06nitrogen6x: config: enable USB keyboard supportEric Nelson
Enable the use of USB keyboards on SABRE Lite and Nitrogen6x boards. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06nitrogen6x: config: expose SATA, then MMC over USBEric Nelson
If no boot script was found, expose internal storage over the USB mass storage gadget to allow easy programming. This is especially useful when SD cards are inaccessible or when loading SATA drives. More details are available in this blog post: http://boundarydevices.com/u-boot-usb-mass-storage-gadget/ Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06nitrogen6x: config: add initrd_highEric Nelson
Support RAM disks by setting initrd_high. See commit 7e9603e Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06nitrogen6x: config: use FS_GENERIC load commandKevin Mihelich
Remove the individual attempts to load using ext2 and fat, replace with the generic load command supporting available filesystem types. Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
2014-10-06nitrogen6x: config: allow boot to USB stickDiego Rondini
This patch enables boot to USB storage devices by expanding on the list of boot devices. Because the USB startup currently takes a long time, it places USB at the end of the list of supported devices. You can over-ride the boot order using the bootdevs environment variable. For instance, this will make USB the first (highest priority) device: U-Boot > setenv bootdevs usb mmc sata U-Boot > saveenv Signed-off-by: Diego Rondini <diego.rondini@kynetics.it> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06nitrogen6x: config: add USB Mass Storage (ums) supportEric Nelson
Add support for the USB mass storage to enable access to on-board storage (especially eMMC and SATA). Details at: http://boundarydevices.com/u-boot-usb-mass-storage-gadget/ Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06imx6: add Bachmann OT1200 boardChristian Gmeiner
This patch adds support for the OT1200 series of devices. Following components are used in u-boot: + ethernet + i2c + emmc + gpio For more details see README. Changes v1 > v2 - make use of enable_cspi_clock(..) - fix usage of OUTPUT_40OHM define - added README Changes v2 > v3 - improve spelling in README - added own copy of mx6q_4x_mt41j128.cfg Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2014-10-06arm: m53evk: Zap superfluous tab in envMarek Vasut
Remove this tab from env, since it's useless, just use spaces. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2014-10-06arm: m28evk: Zap superfluous tab in envMarek Vasut
Remove this tab from env, since it's useless, just use spaces. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2014-10-06mx6sxsabresd: Fix PCI reset and power GPIO assignmentsFabio Estevam
PERST_GPIO and POWER_GPIO are currently swapped. Fix the GPIO assignments as per the board schematics. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-10-06lsxl: convert to generic board and fix typoMichael Walle
Besides converting the LS-XHL and LS-CHLv2 to generic board, fix a typo which accidentally reverted the bootsource to 'hdd' although the default bootsource should be 'legacy'. Cc: Tom Rini <trini@ti.com> Cc: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-05ARM: UniPhier: add UniPhier SoC support codeMasahiro Yamada
These are used by Panasonic UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-01ARM: sheevaplug: add HUSH parserDrEagle
This patch add HUSH command parser Signed-off-by: Gerald Kerma <drEagle@doukki.net> Changes in v1: - add HUSH command parser Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-01ARM: sheevaplug: redefine MTDPARTSDrEagle
This patch redefine MTDPARTS Signed-off-by: Gerald Kerma <drEagle@doukki.net> Changes in v1: - redefine MTDPARTS Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-01ARM: sheevaplug: add MTD defaultsDrEagle
This patch add MTDIDS and MTDPARTS defaults settings to sheevaplug Signed-off-by: Gerald Kerma <drEagle@doukki.net> Changes in v1: - add MTDIDS and MTDPARTS default to sheevaplug Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-01ARM: sheevaplug: add MVSATA driverDrEagle
This patch add MVSATA driver to sheevaplug Signed-off-by: Gerald Kerma <drEagle@doukki.net> Changes in v1: - add MVSATA driver to sheevaplug - enable ext4 FS support Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-01ARM: sheevaplug: change env locationDrEagle
This patch move the environment offset in sheevaplug. The size of the u-boot binary is become too big. Fix saving environments was result of corrupting the u-boot. Signed-off-by: Gerald Kerma <drEagle@doukki.net> Changes in v2: - patch description Changes in v1: - fix sheevaplug environment offset Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-01wandboard: Select CONFIG_CMD_FUSEFabio Estevam
Select CONFIG_CMD_FUSE so that the fuse API commands can be used. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-09-30imx: mx6dlarm2: Add support for i.MX6Q/DL arm2 LPDDR2 boardsYe.Li
Update the ddr scripts for LPDDR2 and add two build configs for LPDDR2 arm2 board. Since the LPDDR2 arm2 board has different DDR size, use CONFIG_DDR_MB in defconfig to replace the PHYS_SDRAM_SIZE. Signed-off-by: Ye.Li <B37916@freescale.com>
2014-09-30imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 boardYe.Li
This patch adds the i.MX6DL arm2 board support. The i.MX6DL ARM2 shared the same board with i.MX6Q ARM2 board since the i.MX6DL is pin-pin compatible with i.MX6Q. The patch also support the DDR 32-BIT mode option. Please define CONFIG_DDR_32BIT in the board configure file to enable DDR 32-BIT mode.But due to the board design, it's 64bit DDR buswidth physically, so, if you CONFIG_DDR_32BIT, the DDR memory size will be half of it. Signed-off-by: Ye.Li <B37916@freescale.com>
2014-09-29arm: m53evk: Enable FS_GENERICMarek Vasut
Enable the CONFIG_CMD_FS_GENERIC on m53evk to avoid per-fs specific commands and tweak the environment to cater for this new option. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2014-09-29arm: m28evk: Enable FS_GENERICMarek Vasut
Enable the CONFIG_CMD_FS_GENERIC on m28evk to avoid per-fs specific commands and tweak the environment to cater for this new option. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2014-09-29arm: m53evk: Test if bootscript exists before loading itMarek Vasut
Make sure the boot.scr exists on the card before loading it from the card to avoid annoying message on the console. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2014-09-29arm: m28evk: Test if bootscript exists before loading itMarek Vasut
Make sure the boot.scr exists on the card before loading it from the card to avoid annoying message on the console. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2014-09-29imx: mx6qarm2: Change the mmcroot and mmcpart env valueYe.Li
1. Set the image load partition to the first FAT partition. 2. Set the kernel rootfs partition to the second partition. Signed-off-by: Ye.Li <B37916@freescale.com>
2014-09-29imx: mx6qarm2: Add the kernel FDT Loading supportYe.Li
To support loading FDT file for kernel, add the fdt address, file and loading script to arm2 board default environment. Signed-off-by: Ye.Li <B37916@freescale.com>
2014-09-26Merge branch 'for-tom' of git://git.denx.de/u-boot-dmTom Rini
2014-09-26spi: Add brackets and tidy defines in spi.hSimon Glass
Some of the #defines in spi.h are not bracketed. To avoid future mistakes add brackets. Also add an explanatory comment for SPI_CONN_DUAL_... Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-09-26sandbox: config: Enable all SPI flash chipsSimon Glass
Sandbox may as well support everything. This increases the amount of code that is built/tested by sandbox, and also provides access to all the supported SPI flash devices. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-09-26Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
2014-09-26Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini
2014-09-25board/ls1021aqds: Add DDR4 supportYork Sun
LS1021AQDS has a variant with DDR4 slot. This patch adds a new defconfig for this variant to enable DDR4 support. RAW timing parameters are not added for DDR4. The board timing parameters are only tuned for single- rank 1600 and 1800MT/s with Micron DIMM 9ASF51272AZ-2G1A1 due to DIMM availability. Signed-off-by: York Sun <yorksun@freescale.com> CC: Alison Wang <alison.wang@freescale.com>
2014-09-25ARMv8/ls2085a: Move u-boot location to make room for RCWYork Sun
When booting with SP, RCW resides at the beginning of IFC NOR flash. Signed-off-by: York Sun <yorksun@freescale.com>
2014-09-25ARMv8/ls2085a: Enable secondary coresYork Sun
Spin table is at the very beginning of boot code. Each core has an individual release address within the spin table, the ft_cpu_setup fn updates the "cpu-release-addr" property of each cpu node with the corresponding release address. Also fix CPU_RELEASE_ADDR to point to secondary_boot_func. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Arnab Basu <arnab.basu@freescale.com>
2014-09-25fdt_support: Make of_bus_default_count_cells non staticArnab Basu
of_bus_default_count_cells can be used to get the #address-cells and #size-cells defined by the current node's parent node. This is required when using of_read_number to read from FDT nodes that can be 32 or 64 bytes depending on values defined by the parent. Signed-off-by: Arnab Basu <arnab.basu@freescale.com> CC: Scott Wood <scottwood@freescale.com>
2014-09-25fdt_support: Move of_read_number to fdt_support.hArnab Basu
This is being done so that it can be used outside 'fdt_support.c'. Making life more convenient when reading device node properties that can be 32 or 64 bits long. Signed-off-by: Arnab Basu <arnab.basu@freescale.com> Cc: Scott Wood <scottwood@freescale.com>
2014-09-25driver/ddr/fsl: Fix tXP and tCKEYork Sun
The driver was written using old DDR3 spec which only covers low speeds. The value would be suboptimal for higher speeds. Fix both timing according to latest DDR3 spec, remove tCKE as an config option. Signed-off-by: York Sun <yorksun@freescale.com>
2014-09-25ARMv8/ls2085a_emu: Enable DP-DDR as standalone memory blockYork Sun
DP-DDR is used for DPAA, separated from main memory pool for general use. It has 32-bit bus width and use a standard DDR4 DIMM (64-bit). Signed-off-by: York Sun <yorksun@freescale.com>
generated by cgit (git 2.34.1) at 2025-02-21 00:15:48 +0000