summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-04-23initcall: Drop use of header filesSimon Glass
This file should not include header files. They have already been included by the time initcall.h is included. Also, document how to enable debugging in this file. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-23sandbox: Increase the early-trace-buffer sizeSimon Glass
This buffer is too small now that sandbox has grown in size. Increase it. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-23sandbox: Improve debugging in initcall_run_list()Simon Glass
At present if one of the initcalls fails on sandbox the address printing is not help, e.g.: initcall sequence 0000557678967c80 failed at call 00005576709dfe1f (err=-96) This is because U-Boot gets relocated high into memory and the relocation offset (gd->reloc_off) does not work correctly for sandbox. Add support for finding the base address of the text region (at least on Linux) and use that to set the relocation offset. This makes the output better: initcall sequence 0000560775957c80 failed at call 0000000000048134 (err=-96) Then you use can use grep to see which init call failed, e.g.: $ grep 0000000000048134 u-boot.map stdio_add_devices Of course another option is to run it with a debugger such as gdb: $ gdb u-boot ... (gdb) br initcall.h:41 Breakpoint 1 at 0x4db9d: initcall.h:41. (2 locations) Note that two locations are reported, since this function is used in both board_init_f() and board_init_r(). (gdb) r Starting program: /tmp/b/sandbox/u-boot [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". U-Boot 2018.09-00264-ge0c2ba9814-dirty (Sep 22 2018 - 12:21:46 -0600) DRAM: 128 MiB MMC: Breakpoint 1, initcall_run_list (init_sequence=0x5555559619e0 <init_sequence_f>) at /scratch/sglass/cosarm/src/third_party/u-boot/files/include/initcall.h:41 41 printf("initcall sequence %p failed at call %p (err=%d)\n", (gdb) print *init_fnc_ptr $1 = (const init_fnc_t) 0x55555559c114 <stdio_add_devices> (gdb) Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-23malloc: Fix memalign not honoring alignment prior to full malloc initAndreas Dannenberg
When using memalign() in a scenario where U-Boot is configured for full malloc support with simple malloc not explicitly enabled and before the full malloc support is initialized, a memory block is being allocated and returned without the alignment parameter getting honored. Fix this issue by replacing the existing memalign pre-full malloc init logic with a call to memalign_simple() this way ensuring proper alignment of the returned memory block. Fixes: ee038c58d519 ("malloc: Use malloc simple before malloc is fully initialized in memalign()") Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-04-23clk: mediatek: add driver for MT8516Fabien Parent
Add clock driver for MediaTek MT8516 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com> [trini: Redo whitespace] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-23reset: add polarity field into struct reset_ctlShawn Guo
Some reset controllers support different polarities for reset operation, so let's add a polarity field into struct reset_ctl. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-23pci: Scale MAX_PCI_REGIONS based on CONFIG_NR_DRAM_BANKSThierry Reding
If a platform defines CONFIG_NR_DRAM_BANKS, each DRAM bank will be added as a PCI region. The number of MAX_PCI_REGIONS therefore needs to scale with the number of DRAM banks, otherwise we will end up with too little space in the hose->regions array to store all system memory regions. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-23configs: stm32f746-disco: update EXTRA_ENV_SETTINGSPatrice Chotard
Allows to boot linux distribution. As stm32f746-disco and stm32f769-disco are sharing the same defconfig file, in case of stm32f769-disco build, "fdtfile=..." must be updated with the correct stm32f769 DTB file name. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Sync DT with v4.20 kernel for stm32h7Patrice Chotard
Synchronize stm32h7 device tree with kernel v4.20. U-boot DT files and pinctrl bindings are updated, useless nodes are removed and gpio compatible added. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7Patrice Chotard
Synchronize stm32f7 device tree with kernel v4.20. All pinctrl bindings are updated. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Sync DT files with v4.20 kernel for stm32f4Patrice Chotard
Synchronize stm32f7 device tree with kernel v4.20. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: Import Amlogic G12A u200 DT from Linux 5.1-rc1Neil Armstrong
Import Linux 5.1-rc1 DT from 9e98c678c2d6 ("Linux 5.1-rc1") for the meson-g12a-u200 board, the meson-g12a.dtsi and the corresponding bindings. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-23regmap: fix regmap_read_poll_timeout warning about sandbox_timer_add_offsetNeil Armstrong
When fixing sandbox test for regmap_read_poll_timeout(), the sandbox_timer_add_offset was introduced but only defined in sandbox code thus generating warnings when used out of sandbox : include/regmap.h:289:2: note: in expansion of macro 'regmap_read_poll_timeout_test' regmap_read_poll_timeout_test(map, addr, val, cond, sleep_us, \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/spi/meson_spifc.c:169:8: note: in expansion of macro 'regmap_read_poll_timeout' ret = regmap_read_poll_timeout(spifc->regmap, REG_SLAVE, data, ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/spi/meson_spifc.c: In function 'meson_spifc_txrx': include/regmap.h:277:4: warning: implicit declaration of function 'sandbox_timer_add_offset' [-Wimplicit-function-declaration] This fix adds a timer_test_add_offset() only defined in sandbox, and renames the previous sandbox_timer_add_offset() to it. Cc: Simon Glass <sjg@chromium.org> Reported-by: Tom Rini <trini@konsulko.com> Fixes: df9cf1cc08 ("test: dm: regmap: Fix the long test delay") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-23efi_loader: check memory type in AllocatePages()Heinrich Schuchardt
The UEFI specification prescribes that AllocatePages() checks the memory type. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23efi_loader: rework bootmgr/bootefi using load_image APIAKASHI Takahiro
In the current implementation, bootefi command and EFI boot manager don't use load_image API, instead, use more primitive and internal functions. This will introduce duplicated code and potentially unknown bugs as well as inconsistent behaviours. With this patch, do_efibootmgr() and do_boot_efi() are completely overhauled and re-implemented using load_image API. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Use efi_root as parent handle for the loaded image. LoadImage() should be called with BootPolicy = true by the boot manager. Avoid duplicate free_pool(). Eliminate variable memdp which is not needed after anymore due to "efi_loader: correctly split device path of loaded image". Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23efi_loader: consistent naming of protocol GUIDsHeinrich Schuchardt
We should consistently use the same name for protocol GUIDs as defined in the UEFI specification. Not adhering to this rule has led to duplicate definitions for the EFI_LOADED_IMAGE_PROTOCOL_GUID. Adjust misnamed protocol GUIDs. Adjust the text for the graphics output protocol in the output of the `efidebug dh` command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23efi_loader: export root node handleAKASHI Takahiro
This is a preparatory patch. The root node handle will be used as a dummy parent handle when invoking an EFI image from bootefi/bootmgr command. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Rebased. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-22cmd: add exception commandHeinrich Schuchardt
The 'exception' command allows to test exception handling. This implementation supports ARM, x86, RISC-V and the following exceptions: * 'breakpoint' - prefetch abort exception (ARM 32bit only) * 'unaligned' - data abort exception (ARM only) * 'undefined' - undefined instruction exception Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-22bcm963158: add nand supportPhilippe Reynes
Enable the nand support (driver and command) in the configuration of the board bcm963158. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22bcm968580xref: add nand supportPhilippe Reynes
Enable the nand support (driver and command) in the configuration of the board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22bcm968380gerg: add nand supportPhilippe Reynes
Enable the nand support (driver and command) in the configuration of the board bcm96838gerg. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22compat linux: import completion from linux 4.18Philippe Reynes
This patch port the file include/linux/completion.h from linux 4.18 to u-boot. It define the structure but all the function are stubbed. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22include: linux: io: define devm_ioremap on board with ioremapPhilippe Reynes
The macro devm_ioremap is only defined for configuration that doesn't have ioremap. But this macro may also be defined on configuration with ioremap. This patch remove the condition for the macro devm_ioremap, so it's always defined. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22mtd: nand: provide several helpers to do common NAND operationsBoris Brezillon
Linux commit 97d90da8a88 ("mtd: nand: provide several helpers to do common NAND operations") This is part of the process of removing direct calls to ->cmdfunc() outside of the core in order to introduce a better interface to execute NAND operations. Here we provide several helpers and make use of them to remove all direct calls to ->cmdfunc(). This way, we can easily modify those helpers to make use of the new ->exec_op() interface when available. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [miquel.raynal@free-electrons.com: rebased and fixed some conflicts] Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> [Philippe Reynes: adapt code to u-boot and only keep new function] Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22mtd: nand: import nand_hw_control_init()Marc Gonzalez
Linux commit d45bc58dd3b ("mtd: nand: import nand_hw_control_init()") The code to initialize a struct nand_hw_control is duplicated across several drivers. Factorize it using an inline function. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Philippe Reynes: adapt code to u-boot and only keep new function] Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22mtd: add get/set of_node/flash_node helpersBrian Norris
Linux commit 28b8b26b308 ("mtd: add get/set of_node/flash_node helpers") We are going to begin using the mtd->dev.of_node field for MTD device nodes, so let's add helpers for it. Also, we'll be making some conversions on spi_nor (and nand_chip eventually) too, so get that ready with their own helpers. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Philippe Reynes: only add function nand_set_flash_node and nand_get_flash_node because others were already backported] Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22Merge tag 'u-boot-atmel-2019.07-b' of git://git.denx.de/u-boot-atmelTom Rini
Second set of u-boot-atmel features and fixes for 2019.07 cycle
2019-04-22at91: corvus_defconfig: get rid of build warningsHeiko Schocher
fix CONFIG_OF_EMBED and add CONFIG_DM_USB build warnings. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-04-21Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- Various fastboot, dwc2/stm32 updates
2019-04-21Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- Various stratix10, gen5 updates
2019-04-21usb: dwc2: add support for STM32MP1Patrick Delaunay
Add compatible "st,stm32mp1-hsotg" and associated driver data to manage the usb33d-supply and the ST specific register for VBus sensing. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> # Conflicts: # drivers/usb/gadget/dwc2_udc_otg.c Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2_udc_otg: Add tx_fifo_sz array supportPatrice Chotard
All TX fifo size can be different, add tx_fifo_sz_array[] into dwc2_plat_otg_data to be able to set them. tx_fifo_sz_array[] is 17 Bytes long and can contains max 16 tx fifo size (synopsys IP supports max 16 IN endpoints). First entry of tx_fifo_sz_array[] is the number of valid fifo size the array contains. In case of tx_fifo_sz_array[] doesn't contains the same number of element than max hardware endpoint, display a warning message. Compatibility with board which doesn't use tx_fifo_sz_array[] (Rockchip rk322x/rk3128/rv1108/rk3288/rk3036) is kept. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2: Add function for session B checkPatrick Delaunay
Add a new function to check the session B validity, to be use to check cable connection. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2: Add force-b-session-valid supportPatrick Delaunay
Handle "force-b-session-valid" property from DT. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-19configs: Migrate USB_MUSB_DISABLE_BULK_COMBINE_SPLIT to KconfigAlex Kiernan
Migrate support for disable MUSB bulk split/combine to Kconfig Green Travis build: https://travis-ci.org/akiernan/u-boot/builds/519101867 Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2019-04-18board: atmel: add SAMA5D2 ICP boardEugen Hristev
The SAMA5D2 ICP Board features the SAMA5D27 SoC, together with QSPI Flash, Wilc3000 wireless device and EtherCat support. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-04-17arm: socfpga: gen5: deassert peripheral reset by defaultSimon Goldschmidt
To keep the current behaviour of taking all peripherals out of reset before booting the OS before removing that code from socfpga gen5 SPL, this enables the new behaviour by default for all gen5 boards by adding the environment variable "socfpga_legacy_reset_compat=1" to the default environment. This can be overridden in board config files or by saving an environment without this variable enabled. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-17Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
- drop non-DM code from ti_qspi - support spi-mem for ti_qspi
2019-04-17arm: am57xx: cl-som-am57x: remove board supportUri Mashiach
U-Boot support for the CL-SOM-AM57x module is no longer required. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2019-04-17Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
- Convert DM_MMC and DM_SCSI - A20, R40, H6 Linux dts(i) sync - CLK, RESET support for sunxi, sun8_emac net drivers
2019-04-17Merge tag 'xilinx-for-v2019.07' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx/FPGA changes for v2019.07 fpga: - Add support for external data in FIT - Extend testing for external data case - Inform user about a need to run post config on Zynq arm: - Tune zynq command functions - Fix internal variable setting arm64: - Add support for zc39dr decoding - Disable WDT for zcu100 - Small changes in reset_reason() - Some DT changes (spi) - Tune qspi-mini configuration - Remove useless eeprom setting - Fix two sdhci boot case spi: - Fix tap delay programming clk: - Enable i2c in SPL net: - Fix gem phydev handling - Remove phy detection code from gem driver general: - Correct EXT_DTB usage for MULTI_DTB_FIT configuration
2019-04-17spi: ti_qspi: Drop non DM codeVignesh Raghavendra
Now that all boards using TI QSPI have moved to DM and DT, drop non DM code completely. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> [jagan: update MIGRATION.txt, rebase config_whitelist.txt] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17sunxi: update SATA driver to always use DM_SCSIAndre Przywara
It seems like the Allwinner SATA driver is already quite capable of using the driver model, so we can force this on all boards and can remove support for a non-DM_SCSI build. This removes the warning about boards with SATA ports not being DM_SCSI compliant. It also takes the opportunity to move the driver out of the board/sunxi directory to join its siblings in drivers/ata, and to make it a proper Kconfig citizen. The board defconfigs stay untouched. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> [jagan: select DM_SCSI separately] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-16arm64: zynqmp: Remove eeprom settingMichal Simek
By moving to DM_I2C there is no need to specify any eeprom configuration because it is read from DT. Reported-by: Sreeja Vadakattu <sreeja.vadakattu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16ARM: zynq: fix environment command syntaxMelin Tomas
Update EXTRA_ENV_SETTINGS and related commands to use 'setenv' instead of short name 'set' in commands. E.g. in case command setexpr is enabled the short form does not work properly as the name becomes ambigous. Fixes error messages like: U-Boot> set Unknown command 'set' - try 'help' Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16fpga: Replace char * with const char * for filenameTien Fong Chee
Ensure the string for filename is always constant, otherwise it can be corrupted by the writing. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-15Merge tag 'u-boot-imx-20190415' of git://git.denx.de/u-boot-imxTom Rini
Move to DM ----------- - DM support in sata - Toradex Board to DM - wandboard to DM - tbs2910 to DM - GE boards to DM - VHybrid boards to DM - DM_VIDEO for i.MX
2019-04-15Merge tag 'efi-2019-07-rc1-2' of git://git.denx.de/u-boot-efiTom Rini
Pull request for UEFI sub-system for v2019.07-rc1 (2) In the aarch64 crash dump information about the loaded EFI images is added. In README.uefi the development target is for the UEFI subsystem is described as "Embedded Base Boot Requirements (EBBR) Specification" compliance. Several bug fixes are supplied.
2019-04-15Merge tag 'video-for-2019.07-rc1' of git://git.denx.de/u-boot-videoTom Rini
- optional backlight PWM polarity config via polarity cell - bug fix for ASCII characters > 127 - ANSI sequence handling extensions (implement clear line, reverse video and relative cursor movement commands) - preparation for doing character set translations - left/right and up/down arrow keys translation to ANSI control sequences for cursor movement to fix selection with an USB keyboard in bootmenu - CONFIG_SYS_WHITE_ON_BLACK font scheme configuration for sunxi boards
2019-04-14arm64: allwinner: sun50i: Sync H6 dts(i) files from LinuxJagan Teki
Usually the Linux dts changes were synced in specific tags in Allwinner, to keep track for whats been synced so-far and plan for future syncs. But this patch sync sun50i-h6* dts(i) files from Linux w/o any specific tag since these dts(i) changes are required for new H6 boards support. Linux commit details about the sun50i-h6* sync: "arm64: dts: allwinner: h6: move MMC pinctrl to dtsi" (sha1: 6ba2e45d57afdfd982d12f168edd6a79a65075d8) Linux commit details about the sun8i-tcon-top.h sync: "dt-bindings: display: sunxi-drm: Add TCON TOP description" (sha1: 59a9c39544cd1e5952c2a33028d71aa8180648f8) Part of the sync initiated by 'Clément Péron'. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit (git 2.34.1) at 2025-01-01 02:15:51 +0000